Question about Mazda Premacy

Open Question

How do I fix the tail light on the Mazda Premacy 2000

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

keemo68
  • 1263 Answers

SOURCE: workshop manual for mazda premacy 2002 gasolin

you can find a manual at Napa or Oreillys auto parts store for around 20 dollars hope this helps please rate this solution thanks

Posted on Aug 29, 2008

CRTN
  • 716 Answers

SOURCE: changing the tail light bulbs on a 2000 mazda 626

The Tail Lights Are Accessed From The Inside Of The Trunk There Will Either Be A Panel Immediately Behind Where The Light Is Or Carpet. Remove It And It Will Give You Access To The Rear Of The Bolts Just Grab Twist And Pull And The Light Will Come Out.

Posted on Jan 26, 2009

  • 9 Answers

SOURCE: Airbag warning lights flashing on dashboard of

there are a quite a few problems associated with the airbag light flashing. The light will flash in long and short frequencies, this is a diagnostic code, e.g. two long flashes followed by six short flashes equals code 26, which is clockspring. Other codes are: 46 and 47 connector under seat, 3 power supply etc.

Posted on Dec 06, 2009

  • 192 Answers

SOURCE: Mazda yr 2000 Premacy. After parking car up for a

Your ABS control module has failed. It can fail in two areas.. either the fuse controlling it which is a large fuse and located in the engine cmpartment on most vehicles or the actual ABS actuator control module which is a computer driven box located on bottom of vehicle that pumps the brakes to make them antilock (think how in the 70s you were told to pump brakes, now the car pumps its own brakes) The computer module is what burns out leaving you without ABS but not brakes themselves. Your car indicates this by showing you an ABS error light and a brake light. You are not in danger by driving the vehicle you just will NOT have antilock brakes in the event of an accident and could slide if you lock the brakes by slamming them down. Check your owners manual for the fuse location in your vehicle and inspect it. If its burned out replace it and see if this fixes the problem This is a 3-7 dollar fuse. If that doesnt do the trick unfortunately the repair is very expensive 700+ dollars for a new control unit.

Posted on Jun 15, 2010

  • 1 Answer

SOURCE: is there a cambelt or a chain on the mazda premacy

Belt

Posted on Apr 15, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Location of mazda premacy 02 petrol fuel filter


What causes the pump not to run when turning on the ignition & click sound of relay then no spark on a Mazda premacy?

Nov 16, 2012 | Mazda MPV Cars & Trucks

1 Answer

Mazda premacy 2006 repair manual


necesito cambiar el aceite de caja automatica secuencial de un mazda premacy 2006 quiero saber que tipo de aceite lleva escribanme a juanmi431@hotmail.com gracias

Mar 26, 2012 | 2005 Mazda Premacy 2.0

1 Answer

What milage do you change timing belt on a mazda premacy


it should be changed every 60,000 miles

May 25, 2010 | 2000 Mazda MPV

3 Answers

Airbag warning lights flashing on dashboard of mazda premacy 52 reg can I reset to clear these lights myself?


there are a quite a few problems associated with the airbag light flashing. The light will flash in long and short frequencies, this is a diagnostic code, e.g. two long flashes followed by six short flashes equals code 26, which is clockspring. Other codes are: 46 and 47 connector under seat, 3 power supply etc.

Nov 17, 2009 | 2002 Mazda MPV

1 Answer

Wiring colours for the sound system MAZDA PREMACY 200


well if you have not cut the wires you can go to wal-mart or autozone ask for a after market wire harnis just tell them the make and model . but if you have cut them then get a light tester

Apr 04, 2009 | 2000 Mazda MPV

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...