Question about XJ6

Open Question

Turn signals works fine but hazard not working

Turn lights work fine but hazard is not working.and when i push the hazard button turn lights stop working and after i push turn lights button 3-4 times starts working again

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

the terrier
  • 94 Answers

SOURCE: Turn Signals Won't Work 2003 Jeep Grand Cherokee

hi roberto
its probably the small copper contacts in the plastic unit that encompasses the steering column this can be purchased and refitted quite easily by removing the steering wheel,removing the securing screws unplugging the electrical loom plug and slipping over the steering column. replace new unit in reverse . probably caused by over-exadurated movement of the signalling lever

Posted on Oct 24, 2008

WardMesservy
  • 19 Answers

SOURCE: 1992caravan turn signals, low beams, and heater motor do notwork

A) Faulty turn signal switch or circuit.
B) Broken dimmer switch or poor electrical connection.Could be relay also.
C) Unplug the electrical connector at the motor and use fused jumper wires to connect the fan motor directly to the battery. If the fan still doesn't work replace the motor. If fan works could be your relay.

Posted on Jan 19, 2009

  • 74 Answers

SOURCE: Turn signals hazards and brake lights are not working fuses good

did u check fuses under the hood on driver side lol yes ford has them thear also

Posted on May 24, 2009

wilsodfarm
  • 986 Answers

SOURCE: 1998 Dodge 2500 pickup turn signals, hazards

There is a conector box on the left side of your steering wheel on the colum loosen it and check your wires I bet when you just loosen the block they will start working,I hope this helps you

Posted on Oct 08, 2009

  • 1 Answer

SOURCE: 1999 Camry Turn signals and hazard lights not working.

located on the firewall panel on the left side of the floorboard on the drivers side

Posted on Mar 27, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My left turn signal will not stop blinking while car is running or completely off...please help!!


Hi BJ:
Interesting...........

- Hazard lights work when ignition is turned OFF.
- Signal lights Don't work when ignition is turned off.
- Is it possible that the Right signal bulb is burned out?
- I'd be checking the functions of all of the bulbs.
How did this problem start?
Please reply as a COMMENT to this post.
Cheers.

Jan 06, 2016 | 2003 Saturn Lw 4dr Wagon

2 Answers

My turn signals and hazard lights stopped working


Hazard switch..had it happen to my 2002 impala

Dec 13, 2013 | 2001 Chevrolet Impala

1 Answer

HELP ME PLEASE!!!!! I replaced my flasher unit, and my signal lights still blink 1-2 times then nothing. My hazards and brake lights work fine. I push the signal arm down and it blinks 1-2 times then...


Have you replaced the relay because there's one of them as well with the flasher unit. I've been having a problem with my hazards not working but turn signals work fine. Maybe the arm on your steering column might be on its way out because they do get used alot.

Sep 20, 2013 | 1999 Ford Expedition

2 Answers

!997 Ford Thuderbird brake lights and hazards do not work


Lets start at the beginning.
The turn signals and brake lights use different fuses but both go thru the turn signal switch and use the same bulbs.
Have you checked the fuses for each circuit and does each switch have power in and out ?

Feb 03, 2013 | 1997 Ford Thunderbird LX

1 Answer

My hazard lights won't come on at all. The turn signals work fine, as long as the hazard button is not depressed. The hazards used to work, but if the hazard button was pressed and I put on a turn signal,...


sounds like a dirty switch, happens a lot in the UK as the switch is checked for the safety every year so the dirt in the switch causes open circuits, it is a complicated switch, it has many contacts that do different things when in and out, try a salvage yard

May 03, 2011 | 2001 Kia Rio

1 Answer

Turn signals work fine one minute and then they stop. I can pull over to the side and turn car off and then on and it works fine or if I tap the hazard light switch they start to work. What is the problem.


The turn signals and hazard lights are controlled by the hazard switch, which is the button you push to engage your 4 way flashers. The electronics in the switch corrode over time and the result is an intermittant, no turn signal/no hazard light problem. Under most circumstances, replacing that switch eliminates the problem. There is another possbility, rare, but possible. That is, there is a problem with the BCM and/ or the ignition switch as some of the electronics run through the ignition switch. Usually if the switch is at fault, you will get a no-start condition WITHOUT the passlock security light, and possibly a random re-set of the cluster gages similar to what you see when first starting your vehicle. Have this checked by a qualified mechanic before spending money on a new ignition switch!

Jun 26, 2010 | 2002 Chevrolet Impala

1 Answer

Hazard lights wont come when you push hazard button turn signals will not work push it again and they work


it sounds like the relay has gone for your hazard lights, when you press the button to turn them on, it will disconect the power to the main indicators hence wont work when hazards pused in, try locating either the hazard flasher unit, or the relay , have you checked the fuses?

Feb 01, 2010 | 2000 Hyundai Elantra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...