Question about 2007 Suzuki Grand Vitara 4WD
I enterd code waited and now I waited again enterd code but now the radio is lock with ---- is there A WAY THAT I CAN GET BACK ACCES TO RIGHT THE CODE NOW THAT I FOUND IT
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: radio code
No tricks...if you got any of the original paperwork with the vehicle check and see if anyone wrote down the code (on the inside cover of the manual etc) If not, go to any dealer and show them that you are the owner and they can get the code for you. When you get it, write it down so you will always have it! (I never heard of a dealer charging for that info)...Good luck with your vehicle!
Posted on May 20, 2009
SOURCE: PO135 Error Code
Bank one stands for the same side as the number 1 cylinder. Sensor 1 is
the first sensor in the bank, (closest to the engine or upstream).
In most cases you will find it on the drivers side\left hand side of the engine and above the catalytic converter. Look for it on the lower portion of the exhaust manifold.
Posted on Sep 07, 2009
p0340 is indicating a problem with the CMP sensor .. thats "camshaft position sensor" ... the 340 would indicate that the sensor is open or shorted (not giving information) ... look for disconnected or defective CMP or CAMP sensor ..
Posted on Dec 23, 2009
Testimonial: "thanks a lot"
Its below the Dashboard, on the left side of your knee. You have to use a torch & locate it from under the Dashboard, Its roughly near to the Clutch Pedal.
Here, it looks like this: (The Black one is the Fuse box)
Posted on Jan 23, 2010
SOURCE: central locking fob
Remote control buttons operated repeatedly while vehicle out of range and system becomes inoperative. System malfunction.
Ensure ignition switched OFF and all doors closed. Proceed as follows: Within 10 seconds, open driver's door and switch ignition ON. Within 10 seconds of switching ignition ON, switch ignition OFF. Within 20 seconds of switching ignition OFF, press and release driver's door contact switch 3 times. Within 10 seconds of releasing driver's door contact switch, switch ignition ON then OFF. Within 20 seconds of switching ignition OFF, press and hold both remote control buttons in turn for at least 5 seconds. The driver's door should lock and unlock once. Within 5 seconds of driver's door locking/unlocking, press remote control lock button Fig. 1  or unlock button . Programming procedure complete. Confirm programming has been successful by locking and unlocking vehicle.
NOTE: A maximum of 2 remote controls can be programmed.
Posted on Feb 06, 2010
Tips for a great answer:
Jul 16, 2016 | Suzuki Cars & Trucks
Oct 30, 2015 | 2001 Suzuki Grand Vitara
Oct 14, 2015 | 1999 Suzuki Vitara
Mar 01, 2015 | 2008 Suzuki Grand Vitara
Mar 04, 2013 | 2008 Suzuki Grand Vitara
Sep 20, 2012 | Cars & Trucks
Jan 19, 2011 | 2002 Suzuki Vitara
Feb 17, 2010 | 2007 Suzuki Grand Vitara 4WD
Dec 28, 2009 | 2007 Suzuki Grand Vitara 4WD
142 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: