Question about GMC Yukon
Sounds like a card in the spokes of a wheel
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
sounds like tie rod ends with the shaking.check struts and sway bar links on the snapping. hope this helps you.
Posted on Jun 29, 2009
SOURCE: front end noise
Hi Wild Bear
No 1....... Check your wheel nuts ! !!!!!!
Is the problem worse on full lock, one way ?
If so, it sounds like the drive shaft CV joint is shot.
Jack up the front, support car on axle stands.
Spin your front wheels, check the treads, and I should think, you will be able to tell the problem wheel.
Expect it might be in the brake caliper area, something loose and fouling the wheel or rim ?
Check for play too, in your front wheel bearings, by gripping the tyre, top and bottom and pulling, there should be no movement.
Give these things a try, and get back to me.
Good Luck !
A FixYa rating would be nice thank´s
Posted on Feb 10, 2009
SOURCE: I just drove my kia
SOUND LIKE BAD STARTER SOLENOID.IF YOU HEAR LIKE CLICKING NOISE.CHECK BATTERY CABLE FOR TIGHTNESS AND CLEAN FREE FROM CORROSSION.CHECK BATTERY VOLTAGE SHOULD BE 12.5 VOLTS.IF NOT BATTERY HAS WEAK CELL IN IT.IF YOU HAVE TO REPLACE BATTERY.TURN OFF RADIO BEFORE DISCONNECTING NEGATIVE BATTERY CABLE SO YOU WONT LOCK OUT RADIO CODE.
Posted on Oct 14, 2010
Tips for a great answer:
Jun 09, 2014 | Cars & Trucks
Oct 12, 2013 | 2001 Honda Civic
Apr 23, 2013 | 2003 GMC Yukon XL
Oct 26, 2012 | GMC Cars & Trucks
May 06, 2012 | 2001 Subaru Forester
Feb 23, 2011 | 2000 Dodge Caravan
Jun 13, 2010 | 2001 GMC Yukon
Oct 22, 2009 | 2004 Honda CR-V
Aug 14, 2009 | 2001 GMC Yukon
May 15, 2009 | 2003 Hyundai Santa Fe
87 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: