Question about Cars & Trucks

Open Question

'99 Dodge Dakota Front End Parts Diagram

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 15 Answers

SOURCE: 2003 Dodge Dakota front end makes click noise only when in a turn

check that the caliper slides are free and that you refiited the anti squel plates on the back of the new pads

Posted on Dec 29, 2008

  • 4369 Answers

SOURCE: Diagram of front end for '94 F150 Ford

this is a 96 f150 suspension, 4x2, not 4x4.

f7f2b45.gif
Item Part Number Description 1 N806246-S56 Nut and Washer 2 5A333 Retainer 3 18124 Front Shock Absorber 4 40949 Bolt 5 N62048 Nut 6 N806496 Nut 7 18126 Lower Shock Bracket 8 805033 Bolt 9 3B404 Caster and Camber Adjuster 10 800937 Nut 11 5414 Front Spring Insulator 12 3105 Front Wheel Spindle (RH) 13 3106 Front Wheel Spindle (LH) 14 3050 Front Suspension Lower Arm Ball Joint 15 3B008 Steering Arm and Drag Link 16 800895 Nut 17 642569 Cotter Pin 18 383489 Nut 19 3006 Front Axle 20 388727 Bolt (F-150) 21 389574 Bolt (F-250, F-350) 22 606085 Bolt 23 605920 Bolt 24 3405 Radius Arm 25 34992 Nut 26 5A307 Lower Spring Seat 27 5414 Front Spring Insulator 28 18183 Front Shock Absorber Mounting Bracket 29 34992 Nut 30 5310 Front Coil Spring 31 5B315 Upper Spring Seat 32 18198 Insulator A — Tighten to 34-48 Nm
(25-35 Lb-Ft) B — Tighten to 18-23 Nm
(13-18 Lb-Ft) C — Tighten to 32-58 Nm
(23-42 Lb-Ft) D — Tighten to 60-80 Nm
(44-59 Lb-Ft) E — Tighten to 68-92 Nm
(50-67 Lb-Ft) F — Tighten to 112-152 Nm (83-112 Lb-Ft) G — Tighten to 112-152 Nm (83-112 Lb-Ft) H — Tighten to 340-460 Nm (250-339 Lb-Ft)

Posted on Feb 25, 2009

  • 1 Answer

SOURCE: need help with a dodge dakota reg cab fuse panel diagram

Hanes or
The owners little pocket operations guide

Posted on May 05, 2009

  • 166 Answers

SOURCE: 2002 DODGE DAKOTA FRONT END VIBRATION ON TIGHT

If your car is experiencing some sort of vibration, the very likely cause may be any one of the eight (8) causes found in this very handy diagnostic article of Your Handyman Zone:http://yourhandymanzone.com/Your_Handyman_Zone_How_To_Pages_Vehicle_Car_Zone_Cars_Trucks_Vans_Miscellaneous_Information_Vibration_of_Vehicle_Occurs.htmThis article should definitely help!Good luckBrad

Posted on Jun 11, 2009

michigan man
  • 3533 Answers

SOURCE: Need 1997 Dodge Dakota rear brake parts diagram

give these websites a try www.alldatadiy.com and www.autozone.com also brake pad guid www.rwconnection.com wish you the best of luck Michigan Man.

Posted on Jan 11, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The light come on for the 4wd on my 93 dodge Dakota le but will not shirt in


Check the two vacuum hoses on the right
front side, of the front axle housing

You can use a hand held vacuum gauge, to check
the vacuum modulator & see if it will lock the front axle

Have to have the front end up in air & supported &
turn wheel/tire by hand, as you apply vacuum

Keep in mind with 4 wheel drive,only the right rear &
left front are driven wheels,not all 4

If the front axle locks in, with you pulling a vacuum & you have no
vacuum at the front hoses,then go to the transfer shifter & next to
it,is the vacuum switch

Oct 05, 2014 | 1993 Dodge Dakota

1 Answer

1996 Dodge Dakota,3.9,V6, ignition coil wiring diagram


I think yours has an ignition module which can be checked at parts store. Could also be bad coil. If you must have wiring diagram, get shop manual.

Mar 09, 2014 | 1996 Dodge Dakota

1 Answer

Need diagram for timing chain on 1987 dodge dakota 3.9l v6


The crank & cam gears have marks on them,
shouldn't need a diagram

Turn it over & align the gears & familiarize yourself
with what your taking apart

Sep 29, 2012 | 1987 Dodge Dakota

1 Answer

2005 dakota replacing front sway bar no replace ment part diagram


7585000029_large.jpg Sway bars are installed by removing your factory end links and sway bar. Re-install the new bushings and position your new sway bar on the vehicle in the OEM location and secure it with the same bolts.

Jun 03, 2011 | 2005 Dodge Dakota

1 Answer

I need a diagram of the bracket positions & mounting of the Power Steering pump for a 1989 Dodge Dakota 2wd - 4cylinder 2.5


Yes there is complete guide available for power steering pump and bracket positions mounting.Its will all details and diagram and lot more details.Please click on link below.Check the details http://technoanswers.blogspot.com/2011/03/1989-dodge-dakota-2wd-4cylinder-25.html ------------------ In this link is complete guide for steering and suspension of 1989 Dodge Dakota 2wd - 4cylinder 2.5------------------ This should help. Thanks.Helpmech.

Mar 29, 2011 | 1989 Dodge Dakota 2WD

4 Answers

Radio wiring diagram for 94 dodge dakota


1994 Dodge Dakota Car Stereo Wiring Diagram
Car Radio Battery Constant 12v+ Wire: Red/Blue
Car Radio Accessory Switched 12v+ Wire: Red/White
Car Radio Ground Wire: Chassis
Car Radio Illumination Wire: Black/Yellow
Car Stereo Dimmer Wire: Orange
Car Stereo Antenna Trigger Wire: N/A
Car Stereo Amp Trigger Wire: N/A
Car Stereo Amplifier Location: N/A
Car Audio Front Speakers Size: N/A
Car Audio Front Speakers Location: N/A
Left Front Speaker Positive Wire (+): Dark Green
Left Front Speaker Negative Wire (-): Blue/Orange
Right Front Speaker Positive Wire (+): Violet/White
Right Front Speaker Negative Wire (-): Brown/Blue
Car Audio Rear Speakers Size: N/A
Car Audio Rear Speakers Location: N/A
Left Rear Speaker Positive Wire (+): Brown/Yellow
Left Rear Speaker Negative Wire (-): Brown/Red
Right Rear Speaker Positive Wire (+): Blue/White
Right Rear Speaker Negative Wire (-): Blue/Red

This should help and thank you for using Fixya.

Mar 06, 2010 | 1994 Dodge Dakota Club Cab

1 Answer

Torque spec for king nut on front spindle of 1999 2 wheel drive dodge dakota?


Unsure as to what you are calling the King nut but here are the torque specs for your front end.

Steering Gear-To-Cradle Bolt...........135 ft pnds
Steering Gear-To-Crossmember Bolt (Dakota 2 WD)..........190 ft pnds
Suspension Cradle Plate To-Cradle Attaching Bolt..............123 ft pnds
Tie Rod End-To-Steering Knuckle Nut Dakota (2WD) .............65 ft pnds
Tie Rod Lock Nut.....................55 ft pnds

Dec 08, 2009 | 1999 Dodge Dakota

1 Answer

What are the torque specs for 1990 dodge dakota front suspension.


call carquest or other parts house and ask them for the torque specs or a front end alignment shop.

Sep 24, 2008 | 1990 Dodge Dakota

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

701 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...