Question about 2001 Buick LeSabre
I have A 2001 Buick lesabre, with only 60,000 miles on it. My cruise control stopped working. The cruise light on the steering wheel would go on and off for a few yrs. now it don't come on and won't work. I was told that it could be A mod. that went out. I'm not sure were that is or if I have to take to A shop.
Without factory wiring diagrams to follow
A repair shop is the answer
Posted on Nov 30, 2012
Testimonial: "Well it was only the switch, put new switch in and it works. I took A look at the old switch and found out it would not stay locked in and with A big sign of relieve. I put new one in and works like new... "
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
no not a fuse may be the switch itself this is common and parts are not badly priced. replace the switch. It just pops out. The directions will tell you to take out the airbag first but it will sneek out of there.
Posted on Feb 13, 2009
I am describing the procedure for the "On/Off" switch, I did not try the one you mention. Buy the switch anywhere ( about $15 ), then use a sharp tool ( small knife, screwdriver, anything ) to gently pry the old one from its socket. It is not glued or screwed in or anything, just squeezed tightly in the socket. Once the switch is out, pull the cable, connect it to the new one, insert back in the socket and press gently. No force necessary, it comes out easily.
Posted on Jul 14, 2008
no you should not have to there a 2 covers that surround the collumn then you should be able to change out the cruise. Especially on newer cars James be careful on these believe it or not everything is controlled by those wires in the collumn. If you need any more go to collisionrepairadvice.com
Posted on Mar 10, 2009
This is a fairly common problem, Gm has actually issued a service bulletin regarding this repair. The problem probably originates from one of your wheel speed sensors that is mounted inside one of your front wheel bearings. To be sure, you need to have the car scanned to find out which one and then you have to replace the whole bearing assembly because the sensor is integral to the bearing. The bearing is not hard to do but you will need some professional tools if you want to do it yourself. At a shop it should cost between 3 and 400 dollars complete.
Posted on Jan 10, 2010
Tips for a great answer:
Mar 22, 2015 | 2001 Buick LeSabre Limited
Mar 07, 2015 | 2001 Buick LeSabre
Oct 10, 2012 | 2005 Buick LeSabre
Mar 21, 2010 | 1995 Buick LeSabre
Jun 11, 2009 | 2000 Buick LeSabre
Apr 21, 2009 | 1997 Buick LeSabre
Mar 10, 2009 | 2001 Buick LeSabre
Jan 29, 2009 | 1995 Buick LeSabre
808 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: