Question about Cars & Trucks

1 Answer

Hood light won't work

Posted by on

Ad

1 Answer

Clean Socket & Lamp

Check at wire connector to light assy
for battery voltage

Posted on Nov 30, 2012

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 18 Answers

SOURCE: Electrical - won't start. Hooked up fan to

Your fan or heater likely shorted out and burned up, causing your one of the main fuses to blow due to the spike in current. You will need to determine what burnt up and replace it before replacing the fuse, or you may create a fire hazard or cause further equipment damage. Also double check any changes to wiring to make sure that everything is hooked up properly.

Posted on Nov 01, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 Chrysler Town & Country Tail lights and dash lights won't work


If the brake lights and turn signal lights work, then there may be a bad fuse. Check the fuse box.

Mar 21, 2013 | Chrysler Town and Country Cars & Trucks

1 Answer

Alright I'm a semi tech guy when it comes to cars


The switch on the steering wheel and/or the relay on the high beams is faulty

Dec 05, 2012 | Cars & Trucks

1 Answer

93 suburban no power won't start no lights etc.


Some vehicles have a 50 to 60 amp main power fuse would check for that.

Aug 03, 2017 | Cars & Trucks

1 Answer

Left headlight


If the other head light works ,it won't be a fuse

Check every fuse in the car,won't take long &
the fuses will protect a complete circuit,not just
a couple head lights.

The light switch has a circuit breaker not a fuse.

Have you removed & tested the lamp it'self

No owners manual? Need that for fuses & bulbs/lamps

Sep 04, 2012 | 2001 Hyundai Sonata

1 Answer

2000 model Hyundai lantra immobilizer won't start


un hook your battery for 15 minutes then retry to start

Jan 17, 2018 | 2000 Hyundai Elantra

1 Answer

Unable to take out of park position


Do the brake light work? No brake lights and it won't shift out of park. Check your fuses and check for loose wires. Check your brake light switch. If that has failed, you won't be able to get out of park. The other one if the shift lock solenoid which is in the shifter assembly. The brake shift interlock switch prevents the car being shifted from park unless the brake pedal is depressed. Try to apply power/ground to the proper wires & see if it will activate.. If it does, then the problem is between the brake light switch & that solenoid. Could be the wires or the switch.Make sure the shifter cable is still held down in place at the shifter assembly & under the hood. It is the interlock switch that you hear/feel clicking.It is for the prior generation but may still apply.

Good Luck and hopefully you soon will be on the road again...;-)

porsche parts

May 27, 2012 | 1995 Ford Aerostar

1 Answer

Red security activation light on dash won't stop blinking. When starting engine alarm goes off and have to use key in doorlock to disarm. Have replaced 50 amp fuse under hood but still no success


Had same problem not to long ago~~~~ I have to check all 4 doors to be sure they are locked mainly the back 2 and then I went around to all 3 door locks & locked and unlocked a few times each... it was on passenger side when my light finally was deactivated... hope this helps you.. I haven't had any problems since ;0)

Aug 11, 2011 | 1997 Jeep Grand Cherokee

1 Answer

My dad jumped his work truck with my 99ford escort zk2 and I think that he hook the pos to the neg. Well all the bulbs blew and the windshield wipers run non stop when fuse is in. Have everything fixed...


check all the fuses with a meter , not just by sight, then, look under the hood for the fuse block there, check those fuses also, especially the main fuses, 30 amp and above,, with any luck he didn't blow out your computer

Aug 08, 2011 | Ford Escort Cars & Trucks

2 Answers

Parking lights won't work


check your wiring on the side tat the light dont work with a light tester whith the switch on
your wiring might be broke or you light holder might be no good

Jan 02, 2009 | 1996 Ford Windstar

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

john h

Level 3 Expert

14548 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...