Question about 1994 Suzuki Samurai

Open Question

Will a 1988 suzuki samari distributor fit in a 1992 samari motor

Will a 1998 distributor fit in a 1992 motor

Posted by Anonymous on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 102 Answers

SOURCE: can water pump be removed and re-installed W/O

No. As both the water pump pump pulley and crankshaft pulley both partially cover the timing belt cover, they have to be removed to get the timing belt cover and the timing belt off. The only bolt you DON'T need to undo (unless you want to change the front crankshaft oil seal), is the centre bolt holding the crankshaft timing belt sprocket on. Only the surrounding 4 or 5 bolts need to be removed so the crankshaft pulley can be removed.

Posted on Jan 29, 2010

emissionwiz
  • 75822 Answers

SOURCE: What is the engine firing order for a Suzuki

firng order is 1-3-4-2 see diagram of distributor cap below.


475948f.jpg

Posted on Jul 23, 2010

  • 48 Answers

SOURCE: How to remove a front wheel bearing on a 1988

Because of many things involved,. you need to go to your local parts store and get a Haynes or Clymer manual

Posted on Mar 29, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Suzuki samari JX 1987 engine miss.


Headgasket is blown between those 2 cylinders. Do a compression check on all cylinders probably between 150 - 180 lbs in good condition. Adjacent cylinders will be nil. If there is some pressure, say 50 lbs, check the valve clearances on all cylinders.

Apr 08, 2017 | Suzuki Cars & Trucks

2 Answers

How to R & R of Main Ignition Modual, 1992 Honda Accord


The ignition module is located inside the distributor and costs almost the same as a complete rebuilt distributor. It's usually best to replace the entire distributor on your Accord, to resolve a bad ignition module.

Nov 08, 2012 | 1992 Honda Accord

1 Answer

I have a suZuki samari, and the four wheel drive is stuck in neatral. How do I fix it?


I'm assuming you know how the shift works.......sometimes it is a little difficult to position the lever correctly. Due to a possible problem with the plastic "cup" that supports the shift lever, you will need to remove the shift lever from the transfer case, and Use a big screw driver to move the mechanism to the neutral position. Many Samurai suppliers offer the kit to fix the shift

Mar 20, 2011 | 1988 Suzuki Samurai

1 Answer

How to remove a front wheel bearing on a 1988 Suzuki samari?


Because of many things involved,. you need to go to your local parts store and get a Haynes or Clymer manual

Feb 21, 2011 | 1988 Suzuki Samurai

1 Answer

What is the engine firing order for a Suzuki


firng order is 1-3-4-2 see diagram of distributor cap below.


475948f.jpg

Jul 23, 2010 | 1986 Suzuki Samurai

1 Answer

Can water pump be removed and re-installed W/O removing any pulleys on a 1988 Samari Suzuki.


No. As both the water pump pump pulley and crankshaft pulley both partially cover the timing belt cover, they have to be removed to get the timing belt cover and the timing belt off. The only bolt you DON'T need to undo (unless you want to change the front crankshaft oil seal), is the centre bolt holding the crankshaft timing belt sprocket on. Only the surrounding 4 or 5 bolts need to be removed so the crankshaft pulley can be removed.

Jan 28, 2010 | 1988 Suzuki Samurai

1 Answer

Replacement engine for 1988 4runner


The Camery motor won't work, and neither will the 3.2. Go to http://www.unitextrading.com/
These guys are the best. Champagene motors at beer prices. These guys will help you out. Don't forget to vote. Thanks

Jan 19, 2009 | 1988 Toyota 4Runner

Not finding what you are looking for?
1994 Suzuki Samurai Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...