1991 dodge dynasty ... best way to remove the rear window without breaking the glass

Test the brake light switch, it is above the arm that the brake pedal is attached to.

E-Bay

Window Slider RR - YouTube

? 3:21
www.youtube.com/watch?v=TR1-beP3ebE
Sep 22, 2009 - Uploaded by filbert383
HOW TO: Remove and replace the slider glass in a Gen IIIDodge Dakota. ... Very good, I have a 1991 Dodge Dakota and the rear window leake. So last .... Pickup trucks sliding rearwindow Back glass movable replacement ..

Go To http://www.aa1car.com/library/belt_tensioners.htm This Might Help

Try a 1 1/2 to 2 ft.metal bar to pry tension pulley back--get helper to remove. Wear heavy gloves. Do same to install new belt.

remove it and check capacitor (leak)

check speed sensor(OHM)

Main switch on the drivers door.

here is what I found:
http://www.the12volt.com/installbay/stereodetail/715.html

indicates a fluid change is needed
have the fault codes read

I have never been able to remove sealed in glass without breaking it. But in theory if you can get a guitar string through the sealant and pull it through like a cable saw you might get it out. I've tried 15 times, and have 15 broken windshields to show for it. good luck