Question about 1996 Ford Thunderbird LX

1 Answer

Can your remove wheel liner without remove tire on 96 thunderbird?

Posted by on

  • 3 more comments 
  • blesseddrift
    blesseddrift Dec 03, 2012

    Evidently I'm misunderstood. I want to remove the wheel well cover/liner not the tie rod or rotar.

  • Anonymous Dec 03, 2012

    To me to even ask if you have to remove the tire is a silly question. Your not misunderstood & the metal or plastci liner can not be accessed without thire removal,that is common sense if you ever work on any vehicles. You can't leave it off & drive the car

  • blesseddrift
    blesseddrift Dec 03, 2012

    Jobs done. No tire removal. Thanks for the silly yet condescending feedback

  • Anonymous Dec 03, 2012

    Next time don't ask

  • blesseddrift
    blesseddrift Dec 04, 2012

    Next time don't respond. I expected respectable and considerate replys,l but you fell short. Your comments were of no help to me. Thank you for the effort anyhow.

×

Ad

1 Answer

No ----why would you try & work like that?

Posted on Nov 29, 2012

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is location of shift solenoid a located on 05 cobalt?


The shift solenoid valves are two identical, electronic exhaust valves that control upshifts and downshifts in all forward gear ranges. These valves are normally open. These shift solenoid valves work together in a combination of ON and OFF sequences in order to control the positions of the 1-2, 2-3, and 3-4 shift valve trains. The TCM monitors numerous inputs to determine the appropriate solenoid state combination and transmission gear for the vehicle operating conditions.
Remove the transmission side cover. Refer to Control Valve Body Cover Replacement . Remove the 1-2 shift solenoid retainer clip (304), the 1-2 shift solenoid (305) with O-ring (303), the 1-2 shift valve (302), and the 1-2 shift valve spring (301).
Remove the PNP switch. Refer to Park/Neutral Position Switch Replacement . Remove the transmission upper side cover bolts. Install the engine support fixture. Refer to Engine Support Fixture in Engine Mechanical. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information. Remove the left front tire and wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels. Remove the left inner fender liner. Refer to Front Fender Liner Replacement in Body Front End. Remove the wheel drive shaft from the transmission. Refer to Wheel Drive Shaft Replacement in Wheel Drive Shafts. Remove the power steering gear mounting bolts. Refer to Steering Gear Replacement in Power Steering. Remove the frame. Refer to Frame Replacement in Frame and Underbody.
This is a tough repair an needs special tools to do it . your best bet is take it to AAMCO

Dec 04, 2015 | 2005 Chevrolet Cobalt

1 Answer

My renault clio headlights and dash keeps switching on and off


Instructions
    • 1 Loosen the lug nuts on the front wheels by turning them one-quarter turn counterclockwise using a tire wrench. Do not unseat the wheel from the wheel hub. The only reason for doing this is to make it easier to remove the lug nuts when the wheels are off the ground.
    • 2 Raise the vehicle onto jack stands. Jack up on the jack point behind the radiator and place jack stands under the front pinch welds of the Megane under the front doors. Then, lower the vehicle onto the jack stands.
    • 3 Finish removing the lug nuts with a tire wrench and pull the tire off the wheel hub.
    • 4 Remove the inner wheel-liner screws using a screwdriver and pull the wheel liner down.
    • 5 Pry the access panel off the the inner wheel well to expose the access hole to the headlight assembly. You won't be able to easily see what you're doing in here, so you'll need to do this largely by feel.
    • 6 Squeeze the release tabs on the headlight connector and pull the connector off the back of the headlight.
    • 7 Pull the spring clip off of the back of the headlight and the headlight will come out of the headlight assembly with no trouble.
    • 8 Insert the new headlight into the back of the housing assembly through the access hole in the wheel well. Installation of the removed components is the reverse of removal.

Jan 20, 2013 | Cars & Trucks

1 Answer

Damaged plastic liner of wheel well rubs on tire when driving over bumps


Even if you popped the dent out, the liner may not fit back on tightly. They are usually held by plastic clips or plastic pins or even plastic screws that easily get distorted, or the hole they are held with gets enlarged from tearing. You could keep the liner up with a couple of machine screws drilled into strategic places....or, you could just remove the liner-it's not a safety issue-it just helps keep mud and dirt from building up in the wheel wells and fender corners. To remove it, first take the wheel off. Then you can see how it is held on Pull it off and throw it away.
If you pop the dent out and fender looks pretty good, and the liner appears it can be re-used with just a little help, all the better.
It;s up to you.

Nov 29, 2012 | Cars & Trucks

1 Answer

96 thunderbird rear end noise when i take off


sounds like a busted strutt try jacking it up and shake the rear wheel if goes sides to side easily its strutt up and down its a wheel bearing.

Oct 09, 2012 | Ford Thunderbird Cars & Trucks

1 Answer

Where is the windshield washer motor of a 96 toyota camry located?


The washer pump is located at the bottom of the fluid tank. On a '96 or '97 it's on the right (passenger side) under the inner fender liner. Remove the Right front wheel. Remove the lower engine cover. You should be able to get the pump out. If it's corroded fast, then you'll have to remove the inner fender liner (lots of clips will break) and remove the entire tank assembly.

Apr 18, 2011 | 1997 Toyota Camry

1 Answer

How to replace a blower motor in a 1996 ford thunderbird lx


Removal
  1. Remove the glove compartment liner to gain access to the heater blower motor and blower motor wheel assembly mounting screws.
  1. Use a small screwdriver to remove clip retaining hydraulic damper strut.
  1. Remove four screws and remove the heater blower motor assembly and blower motor wheel assembly from the heater blower motor housing.
Installation
  1. Using a new seal, position the heater blower motor and blower motor wheel assembly to the heater blower motor housing with the flat side of the flange near the heater blower motor switch resistor (18591). Install the four retaining screws.
  1. Tape the heater blower motor power lead to the air inlet duct to keep the wire away from the blower outlet during installation.
  1. Install the heater blower motor and blower motor wheel assembly in the vehicle.
  1. Install the glove compartment liner.

Oct 07, 2010 | 1996 Ford Thunderbird LX

1 Answer

Where is the fuel filter on a 96 thunderbird lx


Should be behind the passenger side rear wheel, underneath the rear fender towards the back of the car.

May 19, 2010 | Cars & Trucks

2 Answers

How do I change the battery on a 2000 Chrysler Cirrus? Take off left front tire and left fender liner? Do any of you have pictures that can help?


Yes, thats it. Once those are done, you are there. Be sure to use a quality battery, you dont want to go cheap and have to replace it again.

Dec 16, 2009 | 2000 Chrysler Cirrus

1 Answer

Are there any pictures showing where to attach the freon canister to on my 2003 Ford Focus air conditioner?


The low pressure port is behind the passenger fender liner. Remove the right front tire so you can remove the liner.

Detach the wheel arch trim panel on the passenger's side (driver's side shown).
  • Remove six bolts.
  • Remove the trim panel.
63bbe7a.gif

Jun 25, 2009 | 2000 Ford Focus

3 Answers

Battery changing


Ok, trust me on this one, take the drivers side tire off and remove the forward inner fender panel. If you try it without removing the tire, it is just a royal pain.

Aug 25, 2008 | 2008 Dodge Avenger

Not finding what you are looking for?
1996 Ford Thunderbird LX Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...