Question about 2007 Hyundai Santa Fe Limited

1 Answer

Had to buy keyless entry remote.2007 santa fe limited. What is procedure for programming

Posted by on

  • 1 more comment 
  • yadayada
    yadayada May 11, 2010

    do u have a remote that works?

  • Anonymous Mar 13, 2014

    key fob programming procedure 2007 Santa Fe

  • Anonymous Mar 30, 2014

    program keyless entry clicker

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 2 Answers

I just bought one for mine too! The guy who sold it to me gave me these directions but I haven't tried them yet! Am going to on my lunch hour! Hope they work for us both :)

Forgot to put prog. instructions.in with your fob so here they are.
1.Find the ETACS unit under the steering wheel first,there is a small switch onit.
2.Once the switch is located make sure your key is not in the ignition and set the switch from off to set.
3.Press keyfobs door lock button for one second, this sends the codes to the ETACS and stores it.
4.Do the same thing if you have 2 remotes for the vehile.
5.Now set the ETACS switch from set to off.
6.Remotes should now be programed.

Posted on Jan 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need instructions to program keyless entry remote for 2002 Hundai Santa Fe


For a 1994 to 2006 Sonata, a 2001 to 2006 Elantra, a 2000 to 2006 XG350 or a 2001 to 2006 Santa Fe, you will need to access alarm system control module. On most of those vehicles it is located on the driver's side fascia panel. But on the Sonata, the facia panel is in the center.

  • 2 Once you have found this module, you will want to ensure that the memory switch is in the OFF position. Then turn the ignition on.
  • 3 Wait 5 seconds and set the memory switch to SET position and then press the remote transmitter lock button to send the code to the alarm system control module.
  • 4 If you would like to program a second remote transmitter then you will need to press second remote transmitter lock button.
  • 5 Next set the memory switch to off, then turn the ignition off. You can confirm your programming by locking and unlocking the vehicle with both of the remotes. good luck my friend
  • Feb 08, 2012 | Hyundai Cars & Trucks

    1 Answer

    How do I reprogram the key fob on my 2005 Hyundai Santa Fe without having to pay the fee at the dealership?


    Well, you basically have only 3 choices:
    1. Pay the fee at the dealership
    2. Purchase the high-dollar equipment that is required to perform the programming procedure
    3. Forget about adding another key fob to tor vehicle.

    TECHNICAL SERVICE BULLETIN

    Group
    90 - ELECTRICAL

    Number
    03-90-020

    Date
    October, 2003

    Model
    Elantra 2001-2004, Santa Fe 2001-2004, Sonata 2002-2004, Tiburon 2003-2004, XG(NNN) NNN-NNNNand XG(NNN) NNN-NNNN2004

    Subject
    SECURITY SYSTEM KEYLESS ADAPTER CABLE

    This bulletin supersedes TSB # XXXXX
    DESCRIPTION:
    The security system keyless adapter cable (SPX/Kent-Moore P/N 09900-21300) is a special service tool (SST) that is used for programming new keyless entry remote transmitters to the factory security systems. The keyless adapter is used in conjunction with the Hi-Scan Pro (with Hi-Scan SOL Pro Software Version 09-29-03 or newer) and Data Link Connector (DLC) Cable.
    SERVICE INFORMATION:
    The keyless adapter cable can be used on the following vehicles:
    ^ 2001 -2004 Elantra
    ^ 2001-2004 SantaFe
    ^ 2002 - 2004 Sonata


    Apr 24, 2011 | 2005 Hyundai Santa Fe

    3 Answers

    How to program 2004 Hyundai Santa Fe Keyless Entry Remote


    Synchronization
    When
    System malfunction. Remote control added or replaced.
    How
    Access alarm system control module located under driver's side lower fascia Fig. 2 . Set memory switch to SET position. Press remote control lock or unlock button. Set memory switch to OFF position. Confirm synchronization has been successful by locking and unlocking vehicle. Repeat procedure for second remote control. Synchronization can also be carried out using diagnostic equipment.
    NOTE: A maximum of 2 remote controls can be programmed. NOTE: If remote control fails, system can be deactivated as detailed in the owner's handbook.

    Mar 23, 2010 | 2004 Hyundai Santa Fe

    1 Answer

    I dont have any keyless entry remotes, still have factory warranty. will it cover getting a new one?


    No. You will need your vehicle VIN and go to a Hyundai dealer if you want a new one. They use the VIN to program a new remote, same in cutting a new key.But it doesn't hurt to ask about warranty coverage first. first.

    Nov 20, 2009 | 2005 Hyundai Santa Fe

    1 Answer

    Where is the ETACS unit on my 2007 Santa Fe?


    Go to www.hmaservice.com and register( Vehicle by VIN). Afterward, you have access to shop manuals, service bulletins, wiring diagrams, etc. about your vehicle.

    Sep 28, 2009 | 2004 Hyundai Santa Fe

    1 Answer

    2002 Hyundai Santa Fe- which replacement battery do I need for the keyless entry remote (CA2032 or what)?


    dear friend-the battery for your remote can be found at any pharmacy.it is the right number.

    Jul 07, 2009 | 2002 Hyundai Santa Fe

    1 Answer

    PROGRAM KEYFOB FOR HYUNDAI SANTA FE


    This is from the factory service manual of your car:
    There is no onboard programming procedure for this vehicle. This vehicle requires special equipment be connected to the vehicle to program the keyless remote. Translation you need the dealer to do this.

    May 22, 2009 | 2005 Hyundai Santa Fe

    2 Answers

    Program factory remote keyless entry: 2003 Hyundai XG350


    The procedures you list require the Hyundai Keyless Remote programming module, which you don't have. This module is proprietary - only Hyundai Dealerships have it. There is a 10 pin connector under the dash (next to the DLC - Data Link Connector) which is used to connect the Keyless Remote Programming Module. This module has two switch positions "Ready" and "SAVE". When the switch is place in the 'SAVE" position, that's when the keyless remotes are activated to send their 'codes' to the Electronic Time and Control System (ETACS). The module's switch is then set to "Ready" and the remote is tested to see if it works properly.

    May 22, 2009 | Hyundai Motor 2003 XG350

    1 Answer

    Program factory remote keyless entry for 2003 Hyundai XG350


    This bulletin supersedes TSB# 02-90-001.
    DESCRIPTION: The security system keyless adapter cable (SPX/Kent-Moore P/N 09900-21300) is a special service tool (SST) that is used for programming new keyless entry remote transmitters to the factory security systems. The keyless adapter is used in conjunction with the Hi-Scan Pro (with Hi-Scan SOL Pro Software Version 09-29-03
    or newer) and Data Link Connector (DLC) Cable. SERVICE INFORMATION: The keyless adapter cable can be used on the following vehicles:
    • 2001 - 2004 MY Elantra
    • 2001 - 2004 MY Santa Fe
    • 2002 - 2004 MY Sonata
    • 2001 - 2004 MY XG300/350 0390020a.gif
    NOTE
    • The 2003 - 2004 MY Tiburon does not need the Keyless Adapter Cable to add keyless entry remotes to the factory security system. Instead, the Hi-Scan Pro connects to the vehicle using only the DLC cable. See page BE-60 in the 2004 MY Tiburon Shop Manual for the latest instructions.
    • The most current Keyless Adapter Cable Instructions are available in the following shop manuals:
    SHOP MANUAL

    PAGES

    2004 MY Elantra
    BE-73 - BE-74
    2004 MY Santa Fe
    BE-43 - BE-44
    2004 MY Sonata
    BE-40 - BE-41
    2004 MY XG350
    BE-46 - BE-47
    KEYLESS ADAPTER CABLE INSTRUCTIONS:
    1. Connect the keyless adapter cable to the Hi-Scan Pro DLC cable. 0390020b.gif
    2. Plug the keyless adapter into the vehicle's 10-pin multi-purpose connector located behind the driver's side lower instrument panel (next to the DLC). NOTE Sample vehicle shown is the Santa Fe.
      0390020c.gif
    3. Turn the Hi-Scan Pro ON
      and press ENTER
      . NOTE "Release date 29. Sep. 2003" OR LATER
      must appear on this screen. To update your SOL card with the latest software go to www.hmaservice.com and refer to TSB 00-00-001.
      0390020d.gif
    4. Select option "HYUNDAI VEHICLE DIAGNOSIS"
      and press ENTER
      . 0390020e.gif
    5. Select vehicle model and press ENTER
      . 0390020f.gif
    6. Select option "TRANSMITTER CODE SAVING"
      and press ENTER
      . 0390020g.gif
    7. Ensure that the key has been removed from the ignition cylinder before proceeding. 0390020h.gif
    8. Follow the steps noted on the Hi-Scan Pro screen to program the remote(s). NOTE The factory security system can only be programmed to accept two remote transmitters and MUST be programmed for both remote transmitters at the same time.
      0390020i.gif
    9. Press ESC
      on the Hi-Scan Pro and verify that the remote(s) are functioning properly.
    10. Turn the Hi-Scan Pro OFF
      and disconnect the adapter cable from the multi-purpose connector.

    May 22, 2009 | Hyundai Motor 2003 XG350

    1 Answer

    How to program keyless remote


    I just had to buy one too and these are the instructions I was given by the guy I bought it from. I haven't tried them yet. Hopefully they work for us both :).

    1.Find the ETACS unit under the steering wheel first,there is a small switch onit.
    2.Once the switch is located make sure your key is not in the ignition and set the switch from off to set.
    3.Press keyfobs door lock button for one second, this sends the codes to the ETACS and stores it.
    4.Do the same thing if you have 2 remotes for the vehile.
    5.Now set the ETACS switch from set to off.
    6.Remotes should now be programed.

    Jan 10, 2009 | 2007 Hyundai Santa Fe Limited

    Not finding what you are looking for?
    2007 Hyundai Santa Fe Limited Logo

    451 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Hyundai Experts

    yadayada
    yadayada

    Level 3 Expert

    60541 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    21927 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    6811 Answers

    Are you a Hyundai Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...