Question about Nissan Terrano

Open Question



Posted by on


3 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

  • 20 Answers

SOURCE: Where will i find a clock sring? (with a yellow Sticker)

the air bag does not come with the steering wheel actually the clock spring is under the airbag do not try this yourself take it to a proffesional air bags are vey dangerous if u dont know what u are doing

Posted on Oct 14, 2009

  • 140 Answers

SOURCE: what tool is required to remove the screws holding

G'day mate just a word of caution airbags store an enormous amount of pressure energy not for the faint hearted take it to a service centre experienced in this .

Posted on Apr 04, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to remove the dashboard

Drivers side airbag is in the steering wheel unless you are talking about the lower airbag for knees and thighs.

Mar 28, 2015 | 2005 Nissan Altima

2 Answers

How do I remove and install steering column? Thanks

This all depends on what year the vehicle is? And wether there is an airbag fitted on the steering wheel front. If there is an airbag fitted on the steering wheel front, then the job is best left to a qualified mechanic, as the airbag sensor will have to be disconnected ( Disabled) and this can be very tricky. If there is no airbag on the front steering wheel cover then you will need a good socket set, remove the front cover of the steering wheel and undo the bolt holding on the wheel to the column, then you will see the rest of the bolts for the column at the rear, remove these also, take pics of the set up of wiring looms and bolts before! And keep all parts in a box for safe keeping.

Jan 18, 2015 | 1999 Oldsmobile Aurora

1 Answer

How do I remove Drivers front Airbag

First of all make sure you have a radio code
disconnect negative terminal at battery
now on the steering wheel at the side you will see two small little
covers, flick them out with a small screwdriver.
now look through the holes and you will see a torx scew I think its
a t20 or t25 undo these on either side and remove with a magnet pen, now you can remove the airbag, just lifts off!

Apr 05, 2014 | 2011 Nissan Micra 1.2

1 Answer

Replacing airbags

Remove the negative cable from your car battery before replacing car air bags. Not removing the negative cable could deploy the replacement air bag, causing injury. More car obd2 scanner to maintain car with cheap price.
Deactivate the air bag by removing the air bag fuses. Look in your car owners manual to locate the fuses.
Unscrew steering column paneling and remove the airbag bolts on the back side of the steering wheel. Pull out the airbag until you see the back side and unplug the wires.
Plug the new airbag into the wires and rebolt it back onto the steering wheel. Replace the car steering column panels.
Replace passenger side air bags through the glove box or main dash panels. Remove the glove box by taking off the glove box straps and undoing the hinges. Unplug and unbolt the airbag, slide it out the front of the dash, slide the new air bag in and rewire and rebolt it.
Put the glove box or dash panels back together. Reconnect the fuses in the fuse panel and the negative cable on the car battery and you're finished.
OBD Tools 365 Days Shop

Jan 13, 2014 | 2003 Nissan Altima 3.5 SE

1 Answer

How to take off steering wheel

You need a steering wheel puller auto zone 15 bucks first pull you airbag fuse in the distribution box under the hood near the battery. there are 2 bolts, one on each side of the steering wheel remove them and remove the airbag, remove the bolt in the center and use the steering wheel puller and it comes off

Sep 02, 2013 | 1997 Lincoln Town Car

1 Answer

How do I deactivate the drivers airbag on my Nissan Terrano 1997 model. I want to get into the steering wheel to fix the horn contact

Airbags are dangerous if they go off while working on them and they can kill you. I wanted to say that up front before explaining how to get the airbag off. Yours has torx bolts that hold the airbag to the steering wheel. I take no responsibility for your safety so if you have not done work on an airbag before you might want to take it to a shop. WHen I lived in Los Angeles people were stealing airbags and every now and then you would hear of someone getting killed by getting their neck broke when it went off. You have to follow the directions exactly to keep from setting the unit off.

1. disconnect the battery
2. remove the airbag fuse
3. remove the lower knee bolster under the steering wheel
4. wait five minutes from when you removed the fuse and then disconnect the airbag connector to the column. It is a Yellow wire and it is marked.
5. now that the power to the airbag as been discharged you need to remove the two bolts from the back of the wheel to get the airbag off.
6. stay out of the way as in do not have the airbag pointing at you at any time.
7. disconnect the harness and find a safe place, out of the way and set the airbag face up so if it goes off it does not launch anywhere. Most shops have a cage they put them in to keep things safe. Remember this is explosive as in sodium azide and it can kill you and the gas can burn you.
8. installation is the reverse of removal and this is especially true for the connectors and powering the system. Do not hook up the battery of the fuse or the harness prior to installing the airbag and when you hook everything up do the harness, fuse and then the battery. If you disconnect the airbag with power to the system it could go off and you will also set a code with the computer that monitors the airbag system.

Sep 01, 2012 | Nissan Terrano Cars & Trucks

1 Answer

How to remove dashboard

1-Remove the vent/radio housing.
2-Remove the cover panels on either side of the dash that get cover when the door is closed.
3-Remove the panel under the steering wheel.
4- Remove glove box to open space inside of dash.
5-Remove four bolts and connector holding passenger side airbag and remove carefully.
6-Remove cover plate over shifter.
7-Remove the center console.(2 bolts under armrest and 4 screws-2 on either side of the console)
8-Disconnect the wiring harnesses on either side of dash.(White and black connectors. 2 on driver 1 on passenger.
9-Remove the four bolts holding the center of the dash to the floor.
10- remove two bolts on drivers side dash where cover was and same on passenger side.
11- Unbolt the steering column ( 2 bolts under the wheel) and let it rest on floor.
12- The entire dash will remove from the car as 1 piece and each component can be taken out from there.

It isn't worth it to fish for the bolts from the inside. Take the support bar out and work on it outside the car. much faster.

It seems confusing, but easy if you take your time

Aug 04, 2010 | 2003 Kia Spectra

1 Answer

I have a 97 Nissan Pickup the horn blows sometimes when turning the wheel how can I fix it?

i have the same problem right now. a friend of mine said to find out how to deal with the airbag first. he said that something is probably loose inside of there. there are precautions when removing the airbag since it can kill you. anyways, this is what i found while looking around. havent tried it yet, but i hope it helps. im a little tired of being flipped off every so often, lol.
If you are not really mechanical I would be hesitant since the horn button is embedded in the airbag cover. But, I take no liability here.

Disconnect the battery first.
Then take out the airbag fuse.
Then, under the dash on the driver's side unplug the yellow connector to the airbag.
Then, remove the covers on the back of the steering wheel and the two bolts that cover it.
Do not get on the operating end of the airbag when you remove it and hold it away from you and anyone else in the area.
Now, set it down, face up and you can get to what you need.

Aug 03, 2010 | 1997 Nissan Pickup

1 Answer

I cannot figure out how to pull the steering wheel off of my 96 honda accord

Read this carefully, in total, before you begin.

With car wheels aimed straight ahead, disconnect the neg. battery terminal (if you have an anti-theft radio, make sure you have the code, because you will need it.)

Wait three minutes before proceeding to allow the airbag’s backup power supply to be depleted.

Remove the access plate from the lower steering column cover and remove the short connector from the access plate (the short connector is stowed on the inside of the access plate. It is a little device that is used especially for this purpose)

Unplug the airbag module-to-cable reel connector (yellow) and plug the short connector into the airbag module side of this connection to disable the airbag.

Remove the access panels from each side of the back of the steering wheel cover, then remove both of the torx screws (you’ll need a torx screwdriver) that retain the airbag module to the steering wheel.

Pull the module off the steering wheel and CAREFULLY set it aside with the trim side facing up.

Unplug the electrical connector for the horn, and, if you have it, for the cruise control.

Remove the steering wheel retaining nut. Paint or scribe a mark indicating the relationship of the steering wheel hub to the steering shaft.

Remove the steering wheel with a steering wheel puller. DO NOT turn the steering shaft while the steering wheel is removed. If you do so, the airbag reel could be damaged.

Reinstallation is the reverse of the removal, making sure the cable reel is centered with the car wheels straight ahead (if you haven't moved the shaft, that should not be a problem), and making sure that the locating pins on the steering column engage the holes in the back of the steering wheel. Put the nut back. Torque it (36 ft. lbs). Reconnect horn and cruise control. Replace airbag, tighten torx screws. Reconnect airbag and put short connector back in access plate. Reconnect neg. battery cable.

Hope this helps you.

Feb 05, 2010 | 1996 Honda Accord

1 Answer

I need to replace the crusie control buttons

disconnect batt.wait 5 minutes,push brake several times,locate airbag fuse and remove.this is improtant as you will have to remove drivers airbag.there are 2 round plastic caps covering the 2 airbag bolts located at back of steering wheel by the cruise switches.remove caps remove the 2 8mm bolts.remove airbag,set airbag away from you with plastic cover of airbag up.replace switches.reinstall airbag,reinstall fuse.reconnect batt.

Oct 06, 2008 | 2006 Ford Escape

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

245 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts


Level 3 Expert

79024 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides