Question about 2006 Ford F-250 Super Duty

1 Answer

Where the intake air temp sensor on my 03 ford 250

I have a code po113 and what dose that have to do with the over drive

Posted by on

  • 3 more comments 
  • Rodney Blaisdell
    Rodney Blaisdell Nov 29, 2012

    i took and cleaned the maf and that didnt do any good and why i ask about the over drive is because when i delite the code it will shuft into od about when the code comes back it wont shift

  • Anonymous Nov 29, 2012

    As I said ---when you have cleared all data from the pcm & no fault codes are set the shift strategy works thus OD. The PCM is holding off OD when a fualt is present. Solve the IAT issues

  • Rodney Blaisdell
    Rodney Blaisdell Nov 29, 2012

    and that will fix everything

  • Anonymous Nov 29, 2012

    I'm not the car wisperer so hopefully With most people no--- they have all sorts of negelected issues

  • Rodney Blaisdell
    Rodney Blaisdell Nov 29, 2012

    thats the only code i have it shifted fine before this code came up

×

Ad

1 Answer

IAT --provides the sequential fuel injection temperature info

About 18 sensors, solenoids & switches --are used or monitored for shift control strategy


The AIT should be in with the MAF Sensor


Try cleaning it CRC MAF Cleaner --instructions on the can


Why are you asking about OD?



Posted on Nov 29, 2012

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
mrgreenz
  • 962 Answers

SOURCE: intake air temperature sensor

It is mounted on the intake manifold.Also called a MAT Sensor. Manifold Air Temerature Sensor

Posted on Nov 23, 2008

michigan man
  • 3533 Answers

SOURCE: 98 ford f-150 temp gauge and light problems

the intake air temperature sensor is located inside the air intake duct which is where the air filter is located pull the rubber tubing off the throttle body and look inside with a light and you will see it

Posted on Jan 09, 2009

  • 5 Answers

SOURCE: location intake air sensor 1999 ford windstar 3.8

follow your airbox usually front right side of engine and there should be a grommet or a similar attachment holding the sensor into the hose.

Posted on Mar 30, 2009

ourhowse
  • 2007 Answers

SOURCE: 2001 Ford F-250 need location for IAT sensor

In the intake manifold on drivers side by the fuel rail. It's not part of the MAF. Intake air temperature.

Posted on Jun 15, 2009

  • 169 Answers

SOURCE: sensor locations

air intake look at snorkel it could be part of mass air flow check intake for eng coolant

Posted on Aug 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Okay I need your help I have a 1997 GMC K 1500 5.7 L engine truck runs fine but I have a po113 code I have change the air filter the air intake temperature sensor the mass air flow and the coolant...


check your wires at the air temp sensor in the air inlet tube, be careful probing the sensor this may cause problems at the ECM, special equipment is required to do this

Oct 30, 2017 | GMC Cars & Trucks

1 Answer

Code po113


Its the air intake temp sensor. You will find it in the front of the intake somewhere. I am not sure about Geo's but if you have a Haynes or similar manual it will give you this info, you could do a search on internet an find its location. It is going to be on the air intake housing. Sometimes you can do a reset on sensors, but most of the time they dont work. Since the vehicle has some miles on it just replace it. Then clear codes an watch to see if things change. Could be as simple as connector loose

Mar 30, 2014 | 1995 Geo Tracker

2 Answers

2006 Ford F250 6.0 diesel wont start it has codes


C1287 is Booster pedal Force switch circuit failure
U1900 deals with #11 fuse. could be plugged in wrong, symptoms with cruise control inop
PO113 intake air temp circuit
po675 glow plug #5 circuit failure

hope this helps. some web serches on powerstroke.org will get you alot of useful answers

Sep 04, 2012 | 2006 Ford F-250 Super Duty

1 Answer

2005 ford escape code po113 and door ajar light is on


Two different problems.
PO113 is a code for the intake air temp sensor.
The sensor could be bad or could be another problem.
The normal test is to take a scanner and "read" the air temp coming from the sensor. It should be around same as the outside air temp.

Jun 30, 2012 | Ford Escape Cars & Trucks

1 Answer

2002 Ford escape giving po113 code. What is it and how do i fix it?


It has to do with the intake air temp, sensor. Could be a bad sensor , broken wire or something with the ECM. Check the wires first to see if any are broken

Aug 02, 2011 | 2002 Ford Escape

1 Answer

Where is the po113 on a f-250, 2001 super duty 2 wheel drive? please don't say it is in the mass air flow! i just put one in from ford and it still has the same code? ahaobsh@yahoo.com


Is that the only code? That is a code for the Intake air temp sensor. On the black tube from the air cleaner to the throttle body there should be a small senser. That is your Intake air temp. Sometimes those get unplugged when servicing air filters or when aftermarket parts are put on.

Jan 11, 2011 | 2001 Ford F250 Super Duty Super Cab

1 Answer

Car failed emission test intake air temp to high code PO113.


change the intake iar temperature sensor to pass the test.

Dec 18, 2010 | Ford Escort Cars & Trucks

2 Answers

Took my focus 2003 to autozone it is going thru alot of gas and we changed the spark plugs they ran a test and the codes are po113 & po303 i do not know what this means can you help me


P0113 indicates the IAT Intake Temperature Sensor has a problem.
P0303 indicates a misfire on cylinder 3

I believe the IAT is built into the MAF sensor located in the air snorkle and helps regulate the air/fuel mixture. Also concentrate on cylinder 3 looking for problems such as injector, wiring, etc.

Hope this helps!

Audie

Dec 10, 2010 | 2003 Ford Focus

1 Answer

Code po113 is on how can we get it off and fix the problem


It has a problem with IAT sensor..........Intake Air Temp sensor....

Feb 15, 2010 | 2003 Ford Escort

Not finding what you are looking for?
2006 Ford F-250 Super Duty Logo

144 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

77544 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

fordexpert

Level 3 Expert

5636 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...