The control for the air conditioner and heater when you want to select the fan speed it will only work on high. Just need to know where this part is located on the 2002 Grand Caravan sport. Can't seem to find a manual on-line or a place that sells parts with a picture of the part so I can see what it is I'm looking for.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Unlikely a blower motor resistor problem. If the resistor is faulty. the fan speeds will not work/fail on the lower speeds. High speed will normally always work. If the fan is non operational suspect a fan motor issue.Bad fan motor/switch/wiring to it
This condition is caused by a defective blower motor speed control resistor. The resistor is located right next to the blower motor with the connector end sticking out of the ducting for the AC/Heater system. Very easy to replace and the part is cheap as well.
When the blower fan will only work on high speed setting this means the fans speed control resistor is burned out, when it fails the fan defaults to high speed only. The fan resistor is located next to the fan and held into the cooling air duct by 2 screws near the blower motor. The part is fairly cheap and easy to replace.
The blower fan only working on high is caused by only one thing, that is a defective blower motor speed control resistor, the resistor is located next to the blower motor in the air ducting, replace it and the problem is solved.
usually its the heater resistor that causes that. find it and check it out, this controls all fan speeds. its under the passengers side glove box, take off wiring then remove 2 screws and then it will drop out.
All cars are designed with a blower fan motor that pushes air through the ventilation system. This air is processed by a series of vents to direct the air to various positions. Example: heater, air conditioner and defrost modes. Most blower motors are power by a basic electrical circuit that utilizes a multi resistor or a solid-state resistor to control different fan speed modes (low, medium low, medium and high). If the resistor malfunctions it may lose one or more of the lower fan speed settings.
google_protectAndRun("ads_core.google_render_ad", google_handleError, google_render_ad);
Check the blower multispeed control resistor pack is not faulty.
The resistor pack is usually located in the air ducting, in the blower fan airflow.
Basically, +12v power is supplied (via fuse) to the fan speed control switch, which then passes via the selected speed control resistor, to the fan motor. Often a interface relay is used to switch the blower motor high current.