Question about 2005 Ford E-250 Van

Open Question

Looking for power window fuse or relay, but where to look?

IS THERE ANOTHER FUSE BOX IN THE VEHICLE? OR JUST THE ONE IN THE ENGINE? SO DOES THAT MEAN THERE IS NO FUSE FOR THE POWER WINDOWS?

Posted by on

  • 2 more comments 
  • Alex Nov 29, 2012

    ALSO, I GOT NO CLICKING NOISE SO I KNOW IT'S NOT THE WINDOW MOTOR.

  • Alex Nov 29, 2012

    OK1 FOUND THE OTHER FUSE BOX! NO BURNT FUSES,CAN A BAD BCM NOT MAKE THE WINDOWS WORK AND IF SO, WHY DO THE DOOR LOCKS WORK AND NOT THE POWER WINDOWS?

  • Alex Nov 29, 2012

    SO THE RADIO AND THE WINDOWS DON'T WORK BUT ALL FUSE AND RELAYS ARE GOOD, COME ON PEOPLE, SOMEBODY OUT THERE HAD TO COME ACROSS THIS BEFORE! CHECKED WIRE HARNESS FOR CRIMPS,CUT OR LOOSE WIRE CONNECTORS BUT NO LUCK! BODY SECURITY MODULE MAYBE ?

  • Alex Nov 30, 2012

    FOUND SHORT ON BL/RD WIRE. SPLICE C107 BLK/WT WIRE TO C629 BL/RD WIRE AS PER MOTORALLDATA.COM FLOW CHART AND WINDOWS WERE OPERATIONAL ONCE AGAIN.

×

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 512 Answers

SOURCE: 2004 ford explorer power windows inoperable

you may want to check the wires between the door and the body....they have been known to break also

Posted on Dec 29, 2008

Ad
  • 1 Answer

SOURCE: power windows don't work

I had the same problem. There was a wire broken into where the wires go from the door to the inside of the cab. There is a rubber boot over the wires that you have to take loose to see the wires. I changed fuses, checked switches, and relays but i finally found the problem. I hope this helps. DVPNN

Posted on Apr 13, 2009

  • 1 Answer

SOURCE: what number on the fuse box goes to the windows relay switch?

where is the fuse box and which fuse works the cif. lighter

Posted on Feb 24, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fuse box for a 2000 chevy blazer


The fuse is MIR/LKS 3amp . plus liftglass relay . both fuse an relay are located in the underhood fuse/relay box. Driver side fuse box has nothing for the rear glass release . Plus the relay is controlled by the BCM - body control module (computer) ,the switch is a input to the BCM . You can see the location here
http://www.bbbind.com/free_tsb.html enter vehicle info. year , make , model an engine . Under system click on electrical distribution then under subsystem click on fuse panel . Click the search button then the first blue link .

Jul 04, 2017 | Cars & Trucks

1 Answer

2000 JIMMY 4.3 WONT START AND KEEP BLOWING MAIN 40AMP FUSESE


What all does that fused supply B+ voltage too ? Do you know ? That would be your first thing to find out ! Do you know what a electrical distribution diagram is ? Do you know how to test electrical circuits with a DVOM - digital volt ohm meter ? Do you know what a short to ground is ?
Which fuse ? IGN A - 40 amp ,under hood fuse / relay box ? This fuse powers the Starter Relay and Ignition and Start Switch
Does your vehicle have a manual or automatic transmission ? The starter relay could be shorted inside , It's also located in the under hood fuse box . If you pull the relay out of the box it's plugged into an look on the bottom of it you would see four sets of numbers ! 30 & 87 an 85 & 86 . If you were to jump 30 to 87 in the relay box the starter should spin the engine over , not start an run just spin ! 85 & 86 is the control side . Could be the ignition switch !
That 40amp fuse powers a lot of subsystems !

Here is a web site for free diagrams !
http://www.bbbind.com/free_tsb.html Enter vehicle info. year , make , model an engine , Under system click on electrical distribution , under sub system click on power distribution . Then click the search button .Click blue links one at a time . First blue link scroll down to the second diagram . You will see Ign A 40 amp fuse at the top of the page .you will also see it powers the igintion switch ,look at last part of ignition switch , when in start or run that 40 amp fuse powers all those other fuse's plus three relays i see there also . A/C compressor relay , rear window defroster relay ,daytime running lights . Any one of those circuits could have your short . You need to isolate the circuits , pull fuse's till the fuse doesn't blow !

May 27, 2017 | Cars & Trucks

1 Answer

Why is the fuel pump fuse not getting any power feed?


The fuse gets it's power from the fuel pump relay , located in the under hood fuse/relay box. An the ECM- engine computer energize the relay . This does not mean the relay is bad ,Because you have no B+ at the fuse. The thing to do is test for B+ voltage at pins 30 an 86 while cranking the engine . The relay position will be given on the under side of the lid for fuse/relay box. Pull the relay an look at the bottom ,pins side or terminals ,what ever you would call them . Each terminal is marked with a number 30,87, 85 ,86 . The ECM will only energize the relay when it receives a message from the BCM - body control module , with no anti-theft system problems . Do you have a pad lock an car symbol lit on the instrument cluster ?

Dec 06, 2015 | 2008 Chevrolet Silverado 1500 2WD

1 Answer

2005 mercury mountaineer where is my power window dues box


dues box ? do you mean fuse box . There are fuses for the power windows in the under hood fuse / relay box ! F1.62 30amp fuse an there is a relay in the CJB - central junction block ,located under the driver side dash panel . Accessory delay relay , first one top left in the fuse box. That's a good place to start ! what if fuse an relay are good ? then what ? do you know how to use a DVOM - digital volt ohm meter ? Do any of your windows work ? The best place to start is the drivers door window switch ! All power to all windows come through that switch .The lite blue with black stripe wire is power wire at the switch !

Mar 15, 2015 | 2005 Mercury Mountaineer

1 Answer

Power window left & right not working


If you have power to switch, be sure you have ground as well.
Need more info on make, model, year, engine of vehicle as well. Fuses normally under dash or end at drivers door, plus Power distribution box under hood on drivers side. Map is underside of cover.

Mar 14, 2014 | Dodge Cars & Trucks

1 Answer

98 contour repair manual


You don't need a repair manual if you know the basic's of automotive repair . You just need wiring diagrams an fuse box layouts . You can find those here free http://www.bbbind.com/free_tsb.html Enter vehicle info. year , make , model ,engine ! Under system click on electrical distribution .Then under subsystem click on fuse panel . Click the search button then the first blue link . This shows relay positions in the under hood fuse box. The PCM power relay supply's B+ voltage to the fuel pump relay , PCM - engine computer ,mass air flow sensor an someother thing's .

Jul 18, 2017 | 1998 Ford Contour

3 Answers

Power window's locks and mirrors do not work. Is there a fuse that could be replaced or a bad relay?


Yes there is a fuse that can be replaced. Find your fuse box(there may be two) in the vehicle or in the engine compartment. And look at the cover of the box, there should be a listing of what fuse belongs to what systems. Check the appropriate fuse, if blown in the middle, replace with same amp fuse.

Feb 06, 2011 | 2004 Jeep Grand Cherokee

1 Answer

I looked at the owners manual for the fuse box under the hood that has the fuse for the Power Windows . According to the manual there isn't a relay in this box for the windows. Is it somewhere else ?


Check in the Power Distribution box, this is located in the engine compartment, and contains high-current fuses that protect your vehicle.

For POWER WINDOWS, check the position 4, 30AMP (Maxi Fuse) (also Power Moonroof, Power Seat).

1b9e6fb.gif

This and other details can find in your 2000 Mcercury Mountaineer Owners Manual.

Hope this help (remember comment and rated this).

Apr 01, 2010 | 2000 Mercury Mountaineer

3 Answers

97 Olds Aurora power windows don't work


The fuse that you are Looking for should say "PW" for Power Windows. If it is not good there is a Relay in the Box under the Hood for the Same thing. Change this Relay and they Should Work. Please Rate my Response, I need all the Help That I can Get! Thanks!

Jan 28, 2009 | 1997 Oldsmobile Aurora

Not finding what you are looking for?
2005 Ford E-250 Van Logo

Related Topics:

96 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...