Question about 1991 Nissan Pathfinder

Open Question

Vacuum hose diagram on 1991 nissan pathfinder and how to connect charcoal canister properly

V6 engine and charcoal cannister and nissan pathfinder 1991 and how to connect properly

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: 1997 nissan PU charcoal canister

Hi wicked63,

Replace it

Best regards Johngee10

Posted on Oct 18, 2008

crayzeetrayn
  • 837 Answers

SOURCE: replacing timing belt on 1997 Nissan Pathfinder

Here's a link with all the info

I would appreciate a FixYa rating .. thanks .. Crayz

Posted on Mar 08, 2009

GM Elec
  • 1000 Answers

SOURCE: need a vacuum hose diagram for for an '88 nissan

Below is the vacuum diagram for your Nissan.
Good luck.
Regards,

FIG : Fig. 2: CLOSE X printdiagram_txt.gif print_icon.gif
0900c1528018d188.gif

Posted on May 09, 2009

mlvasick
  • 18 Answers

SOURCE: 1993 NISSAN PATHFINDER V6 3.0L timing belt diagram

Here it is, hope this helps!
e53adc0.png

Posted on Aug 08, 2009

daves944
  • 1050 Answers

SOURCE: I need a vacuum hose diagram for a 1995 nissan

This should do it unless you're in California, but I have that on too if you need it.2353d32.gif

Posted on Jan 31, 2010

Testimonial: "thanks! its exactly what i needed"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is starter relay located on a 1991 nissan pathfinder


For an auto transmission truck it is a blue or gray relay just behind the charcoal canister in the engine compartment toward driver's front of engine compartment.

Mar 14, 2017 | 1991 Nissan Pathfinder

1 Answer

Hi i need a vacuum hose diagram for nissan pathfinder 89 model thanks


http://www.autozone.com/autozone/repairguides/Nissan-Pick-ups-and-Pathfinder-1989-1995/ELECTRONIC-ENGINE-CONTROLS/Engine-Co

Feb 24, 2013 | 1989 Nissan Pathfinder

1 Answer

Nissan Pathfinder showing codes on the emmisions test here in Connecticut p0325 and p0302


Fault Codes 1. PO302 = Missfire on Cylinder 2- Injector could be leaking and causing hard start ( to confirm instead to put the fuel pressure under test to confirm,when just started cold having missfiring, switch engine off and remove spark plug to see whether spark plug 2 is wet with fuel ).
2. PO325 = knock sensor - check the Vacuum line which is above the front right tire on the rear side of the tire,where are small hose comes from charcoal canister up over the shock to the purge valve. That hose from the purge canister is connected to a metal hose and then the metal hose connected back to a rubber hose on the purge valve. As the metal hose gets rusted cause a leak by causing the injector 2 to missfire for a little time when warm started. Please check this first before you do anything else. Good luck.

Aug 18, 2012 | 1998 Nissan Pathfinder

3 Answers

Nissan pathfinder 1998 code p0325 what sencor is it there are 4 Sencors ???


It is the knock sensor. But before you do anything first check the vacuum line which is on the front right tire on the rear side of the tire where small hose from charcoal canister up over the shock to the purge valve. That vacuum hose from the purge valve connected to a metal hose and then the metal hose connected back to a rubber hose on the purge valve. that metal hose because it gets rusted cause a leak causing Injector 2 to missfire.

Aug 18, 2012 | 1998 Nissan Pathfinder

2 Answers

My 1995 subaru legacy lsi cuts out when I rev the engine around 1 rpm. Plus the check engine light is on. I took it to the dealership and they couldn't fix it, but they got a code from the check engine...


code p 0441 refers to evaporative emission (EVAP) system --incorrect flow detected ==== causes --- hose connection/s--- intake leak---EVAP canister purge valve replace the purge valve

May 21, 2017 | 1995 Subaru Legacy

1 Answer

2004 Hyundai Sonatai V6 hard to start after refueling...and stalls before it finally operates properly...Car has 100K milkes


You describe a purge control solenoid valve which has stuck "OPEN" (meaning it is continually applying a vacuum to the charcoal canister). When this happens, the engine computer cannot modulate the 'purge flow' from the charcoal canister. It is 'sucking' fumes continuously from the canister after refueling & is flooding the engine (excessive 'RICH' fuel condition).

Replace the PCSV (purge control solenoid valve).

Feb 12, 2011 | Hyundai Sonata Cars & Trucks

1 Answer

Is the vapor canister from a 96 nissan pathfinder compatible with a 97 nissan xe pickup?


Hi, all vapour cannisters are of the same design. Fumes are drawn through a charcoal medium "and cleaned"plus the fumes condensate is absorbed by the treated charcoal The major differences in designs cover the physical size of the cannister and the layout of the fittings. In theory it is possible to fit any cannister to any vehicle using modifications to the cannister body / shell.

Hope this helps.

Feb 01, 2011 | 1997 Nissan Pickup

1 Answer

1991 cadillac sedan deville has excess pressure in gas tank and stalls making right hand turns as soon as fuel gauge shows 9 gals.


SOUND LIKE FUEL PUMP GOING BAD.BUT CHECK THE EVAP CHARCOAL CANISTER FILTER IF GAS SOAKED REPLACE IT REPLACE GAS CAP MAKE SURE GAS CAP IS THE PRESSURE VACUUM TYPE.ALSO CHECK VACUUM PURGE VALVE VACUUM HOSE TO CARBURETOR AND CHECK VACUUM HOSE TO CHARCOAL CANISTER FOR BLOCKAGE RESTRICTION OR BROKEN AND MISSING.

Oct 31, 2010 | 1991 Cadillac DeVille

2 Answers

Check engine light is on. EVAP small leak detected. I checked the gas cap. What's next? This is a 2003 Ford Ranger with the 4.0 v6 engine.


You need to check the purge and vent solenoids for proper operation. You need to check the pressure sensor for out of range ( defective ). You need to check the filler neck for cracks and make sure the clamps are tight. You need to check the vapor lines for loose fit. I've seen at the charcoal cannister where the lines connect it may not be on strait. A smok test will reveal this if its not sealing. You may have a leaking rollover valve or fuel pump seal on top of the tank. You may just have a vacuum leak under the hood, These trucks have an Evap management valve also that can be leaking or out of specs. Look on the emmisions lable or vacuum chart under the hood. This will show you the underhood components.

Jul 15, 2009 | 2003 Ford Ranger Regular Cab

2 Answers

Diagram for timing belt assembly


For which engine.............VGI301 thats the V6 or the L engine?

Oct 16, 2008 | 1988 Nissan Pathfinder

Not finding what you are looking for?
1991 Nissan Pathfinder Logo

Related Topics:

144 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14251 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...