Re: How do you replace turn signal bulb on 2001 Izuzu...
NOT SURE IF IT IS TRUE ON THIS KIND OF VEHICLE, BUT USUALLY WHEN CHANGING A BULB YOU NEED TO GO UNDER THE HOOD ON WHATEVER SIDE YOU ARE CHANGING...AND THERE WILL BE A KIND OF PLUG INTO THE BACK OF THE ACTUAL LIGHT FIXTURE, IF YOU GIVE IT LIKE A QUARTER TURN IT WILL PULL OUT YOU THEN CHANGE THE BULB AND PROCEED WITH PLUGGING BACK IN. MAYBE THIS WILL HELP!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Are you referring to a turn signal blinker? If so, easy, find and replace the burned out bulb. This is a common thing, when a turn signal lamp burns out, the blinker goes "high speed". Time to play hide and seek with the signal bulbs.
Start the car and have someone check the turn signal lamps as you actuate the turn signal. For example, signal for a right turn and have them check both the front and rear signal lamps, do the same for the left side.
When a turn signal bulb is blinking fast, it is an indicator that a bulb is bad in the system. Replace the left rear turn signal bulb, then see if the left front blinker has gone back to normal. This is most likely your problem. Let me know if it is still a problem and i will help you fix it. Good luck
odd speed blinker is a message to tell you that a light bulb has burned or is disconnected. All front lights can be replaced from the engine compartment EXCEPT the turn signal :( .Unfortunately you will have to pull the headlight assembly out in order to reach the turn signal bulb. If the light was off since the assembly was replaced, there is a chance that the socket was simply left unplugged.
Your rear bulb is burnt out if you say the front one is working .. the speed up of flashing means your bulb is bad.. you might have to get in the trunk and unscrrew those hand wing nuts and push that tail light outward to get to the bulbs ... thanks Jerry and holler if you need more.