Question about Cars & Trucks

Open Question

How do i take the front plastics off my 2005 honda rubicon 500?

Ive got most of the clips off but i cant figure out how to ge the switch were you plug in the trailer hitch lights

Posted by on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
rogrrabbit
  • 986 Answers

SOURCE: need a tail light wiring diagram for 2005 Jeep Liberty

I advice you don’t cut into the wiring harness but get the proper kit that is plug and play.

Posted on Jun 14, 2009

Ad
pops296
  • 174 Answers

SOURCE: Wiring problem for 2005 Pathfinder trailer hitch

Sounds like the converter is bad. Go to http://www.etrailer.com/faq-wiring.aspx and check the testing section. Hope this helps.

Posted on Jan 29, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2007 500 Honda Rubicon. Why doesn't 4 wheel drive work?


When you do this, your just checking the differentials, front and back. The transfer case needs checked. FWD and AWD are different. On AWD, the rear differential is what is turned on and off. Both have to be diagnosed with a scanner. Doing it yourself, You can replace high dollar items and it was only a broken wire.

May 20, 2015 | ATVs

1 Answer

How to remove front seat storage bin


MOVE MATS FIRST, DEPRESS CLIPS AND SLIDE OUT AND UP

Mar 05, 2014 | 2005 Chrysler Town & Country

1 Answer

How do you replace a 2007 Honda Odyssey Tail Light


Yes, you have to remove the plastic panel. It is mostly held by spring clips. You can see how to remove it at the link below.
http://www.odyclub.com/forums/52-2005-2010-odyssey/52868-can-t-open-liftgate.html

Aug 20, 2017 | 2007 Honda Odyssey

1 Answer

How do i remove the outer rear door handle on a 07 audi Q7


Ok
Remove plastic plug on the inside of door there is 10 mm hole use a hooked pick set pick put through the hole and pull the plastic cir clip towards the back of the door that will release the smaller part of the outer handle then the handle itself can be taken out.this is so simple but so deceiving the actual cir clip is hard to notice because of all the plastic **** on the inside backing plate the cir clip is just on the inside of hole look hard it is 2mm thick & 20mm high (black plastic) place point of pick in between backing plate & cir clip hook it and pull back the front door is based on the same principle but is a lot easier

Mar 24, 2009 | 2008 Audi Q7

1 Answer

Remove right front fender on 2005 odyssey


NO 2 BOLTS ON TOP OF FENDER UNDER HOOD 1 BOLT BEHIND PLASTIC TRIM BY MIRROR PULL THIS PIECE BACK TOWARDS MIRROR OR IT WILL BREAK TABS OFF 1 BOLT UNDER ROCKER TRIM 1 SCREW INTO ROCKER AND 1 SCREW BEHIND PLASTIC SHROUD GOING INTO BUMPER FROM UNDER NEATH PULL BUMPER BACK SLIGHTY AND YOU WILL SEE A WHITE PLASTIC CLIP PULL BACK AND BEHIND THIS IS A BOLT REMOVE HEADLIGHT CLIP FROM FENDER AND LOSEN BOLT BY HINGE NOW FENDER SHOULD COME RIGHT OFF BOOK IS 2 HOURS TAKES 1 HOUR TO REMOVE BUT GOES ON IN ABOUT 30 NINUTES

Mar 16, 2009 | 2005 Honda Odyssey

1 Answer

Exterior rear door handle on Honda Accord 2001


To Remove Door Panel on 2001 Honda Accord:

A: To remove the plastic piece with the door lock button and door handle connected to it:

1- Remove the screw in the middle located behind a plastic cover button
2- Push (slide) the whole assembly Forward (toward front of car)
Besides the screw, it is held in place by 3 hooks on the backside that hook into holes in the metal door frame
3- Now unhook handle from small metal bar going through door by pushing (toward door) plastic clip (blue?) off of the bar, then the bar will come out of the clip hole, thus releasing the handle.
4- Depress little grey button /bar (purple painted on it)on elec. connector to seperate connector, thus releasing door lock switch

Now the whole assembly (metal handle, door lock switch, and plastic piece) will come off door panel

B: The door is held on by 2-screws, 7-plastic snaps/plugs, and 1-plastic plug.

The screws are located: bottom of hand hold and the other behind the handle, both covered by little covers that have to be pryed off to access the screws.(hint: the screw with the built in spacer goes behind the handle when you are trying to reinstall)
The 7-plastic snaps: 3 across bottom and 2 on each side. Not visible, they are mounted to the inside of the panel.
The 1-plastic plug is visible at the upper front of the panel and is the same color as the surrounding trim


C: Take off the big plastic triangle piece above the door panel and behind the mirror. Pull/pry off. It has 2 snaps holding it on. one near bottom and one near the front.

D: Light lens prys off from bottom. Unscrew (1/4 turn) the light assembly with bulb still intact from backside of panel

E: Remove the Hand-Hold/window switch assembly:

Jan 14, 2009 | 1997 Toyota Camry

1 Answer

How to change my headlights on Honda 2005 CRV


easy cheesy! Ive changed mine twice. The headlights are small bulbs. Make sure you get the right one (hi-beam vs low-beam). Unplug connector at back of bulb / headlamp unit, remove rubber weather seal (pops right ot). The bulb is held in with a small wire clip that is hard to get back on but can be done. Its spring loaded. Drop wire clip, turn bulb assya 1/4 turn, and it comes right out. Remove bulb from holder and replace. Reverse steps and VOILA!

Dec 27, 2008 | 2005 Honda CR-V

2 Answers

How to change the whole headlight assembly on a 05 Honda CRV


You have to remove the front bumper and grill etc

There are 5 bolts holding the headlight assembly in place. 2 at the top and 3 underneath.

Remove the plastic cross piece by prising out the clips and then the grille clips too then unbolt the bolts eithr side under the wheel arch. The bumper is still fastened using cips. Pull the bumper forward to unclip.

Dec 23, 2008 | 2005 Honda CR-V

1 Answer

Change bulb on 3rd brake light on 2005 honda accord


Check for screws from the inside of the trunk,  If none then unit should slide towards front of vehicle, many melt into place due to high bulb temp in small plastic housing

Dec 09, 2008 | 2005 Honda Accord

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

13 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...