Question about 2008 Jeep Patriot
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Turn the key on applie E-brake move the shifter to the lowest postion to be able to remove the center bezel. with a small plastic pry tool pry the gray bezel out. Caution use caution don't pull the bezel out all the way u can break the A/C control lines. turn the bezel to the side so you can remove the radio. 4 philips head srew hold the radio in. remove the radio and disconnect electral connecter. hope this helps..
Posted on Jul 09, 2009
To run any wire through the firewall, find a spot that is both reachable and unobstructed on both sides of the wall. I generally use a very short bit so after penetrating, it does not accidentally plunge into other wiring or components, or I use a collar over the bit (a small piece of tubing, leaving only 1/4" of bit exposed) I sometimes also "cheat" by poking a hole in the rubber boot where the steering column goes through.
Whenever passing a wire through sheet metal you must install a grommet. (if none are available, you can make one by using a piece of rubber tubing or the cut off end of an old tire valve.)
When tapping power from the battery, you will need to use a relay and switch attached to the "accessory on" side of the ignition switch, to prevent whatever you are installing from remaining on after the vehicle has been turned off. Use fuses in all new power sources as well to protect the vehicle and your new install from damage.
In creating a new circuit, you have the opportunity to use shielded wire, which will prevent stray electrical "noise" in your set" not a bad idea to do that.
Posted on Oct 18, 2009
you need to use a window crank removing tool and remove handle. Make sure window is all the way up before reinstalling handle on splines.
Posted on Mar 05, 2010
Tips for a great answer:
Jan 28, 2017 | 2009 Jeep Patriot
Mar 31, 2014 | 2009 Jeep Patriot
Feb 05, 2014 | 2009 Jeep Patriot
Dec 11, 2013 | 2009 Jeep Patriot 2.4
Sep 26, 2013 | 2009 Jeep Patriot
Apr 27, 2012 | 2009 Jeep Patriot
Mar 05, 2010 | 2009 Jeep Patriot
121 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: