Question about Toyota Cars & Trucks

Open Question

P773 code check engine light 1996 toyota 4 runner

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 218 Answers

SOURCE: Check engine light came on

THERE IS A VALVE ON THE RIGHT SIDE OF THE INTAKE MANIFOLD THAT OPEN THE RUNNER.IT HAS A VACUUM LINE TO IT.FOR IT TO BE STUCK OPEN EITHER THE SOLENOID IS BAD,THE VACUUM LINE IS BAD OR THE RUNNER IS GUMMED UP WITH CARBON AND STUCK OPEN

Posted on May 15, 2009

  • 184 Answers

SOURCE: How to reset the ''Check Engine'' light on a 1999 Toyota 4-Runner?

http://www.obd-codes.com/faq/reset_obd_codes.php

Posted on Apr 04, 2009

  • 7 Answers

SOURCE: toyota 2001 4 runner vsc lights on and trac

Those lights always come on whenever the check engine light is on.It could be from the gas cap not being tight enough or an air hose in the engine compartment coming loose. I recommend bringing your vehicle to someone that can read the codes and reset the lights for you. The codes will narrow down what the problem really is.

Posted on Jul 20, 2009

  • 73 Answers

SOURCE: HOW TO REPLACE STARTER 1996 TOYOTA 4 RUNNER

ARE YOU SURE THAT YOU NEED TO REMPLACE THE STARTER

Posted on Jul 26, 2009

jeff_drakesr
  • 155 Answers

SOURCE: need firing order for a toyota 4 runner 1996 6

Here is the Firing Order.

6dcb9b7.gif
Good Luck and have a grt day.

Posted on Apr 01, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Can a diagnostic connector on 1995 Toyota 4 runner be jumped over with jumper wire to get check engine codes?


There is probably a way to access codes by using a jumper and causing the engine checklight or an integral led to flash in groups. I can't say which pin or pins need jumping.

I suggest you ask the question of google and click on the youtube video.

Jun 26, 2016 | 1995 Toyota 4Runner

1 Answer

92 toyota 4runner speedometer inoperable and check engine light comes on


so why not scan it first and wonder 2nd.
that is what the light means, Im seeing errors ,please do scan me now
to see all errors
back in 1992 , DIY you have only blink codes.
my guess is the VSS CODE is set and the VSS is in fact dead.
google Toyota 1992 4runner DTC check codes.
i bet code 9 (use a paper clip at the CHECK term.)
http://www.troublecodes.net/toyota/


or log in alldata.com and read. its all there ,all the time.

Feb 10, 2014 | 2005 Toyota 4-Runner SR5

1 Answer

I have a question. I have a problem with my toyota 4 runner sr5 1996. I can not start my car.The lights are working and nothing else. In addition I see the information check the engine and ABS. Can you...


check the wires on the starter,most cars come with a fusible link located at the starter..should be 2 or 3 wires there and if one is a little too rubbery then that could be the problem.

Jan 15, 2010 | 1996 Toyota 4Runner

1 Answer

4 runner check engine light


Find out why the light is on and fix it. That should aleviate the light problems.

Aug 27, 2009 | 2001 Toyota 4Runner

1 Answer

4 runner trouble


you need to have the computer scanned for codes and see what area is having problems. the vsc lights will come on when the check engine light is on.

Jun 17, 2009 | 2002 Toyota 4Runner

1 Answer

Toyota 2001 4 runner vsc lights on and trac off.also check engine light on.what is the problem?


Those lights always come on whenever the check engine light is on.It could be from the gas cap not being tight enough or an air hose in the engine compartment coming loose. I recommend bringing your vehicle to someone that can read the codes and reset the lights for you. The codes will narrow down what the problem really is.

Jun 10, 2009 | 2002 Toyota 4Runner

1 Answer

'96 Toyota 4-Runner makes a loud squealing noise and brake light


Sounds like one of the auxillary belts slipping it may just need tightening up. I think the 4-Runner has two belts one large and one for the steering pump

May 13, 2009 | 1996 Toyota 4Runner

1 Answer

How to reset the ''Check Engine'' light on a 1999 Toyota 4-Runner?


You need to reset the light with a scan tool, the same one you used to read the code in the first place.

Apr 13, 2009 | 1999 Toyota 4Runner

2 Answers

I have check engine light on toyota 1997 4 runners 2 weels drive


Going to need an obdII code reader to check the code it is giving.

Jan 02, 2009 | 2002 Toyota 4Runner

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...