Question about 2002 Acura 3.2TL
Last couple of day heater is on and now no heater, found out low on anti freeze add anti freeze still no heat whats the problem and how i can i fix it
Need to pruge system when adding anti freeze trun heater on high if sill not working look for bleeder plug at thormo houseing
Posted on Nov 29, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2005 Acura tl brake replacement
The Brembos that come on Type S/Manual models wear fast. I've changed them at 20,000 miles. They are expensive also.
Non-Type S/Manual models I have seen go 80,000 miles. The biggest factor on brake wear is how the vehicle is driven.
At 50,000 miles I would have them inspected. Depending on where you go, make sure you get an accurate measurement of both pads (inboard and outboard). 2mm is the service limit and about that time the indicators start making noise, but not always. Most indepent shops are going to sell you brake pads at 4mm. That's another 10,000 miles at least you could have driven on them.
Never replace just the brake pads, resurface or replace the rotors. The uneven surfaces of the rotor will cause your new pads to wear incorrectly and possibly cause brake noise. Most aftermarket pads will cause a squeel.
Posted on Sep 21, 2008
Look for the end of the wire retainer clip. Unhook it and lift it up. Remember not to touch the bulb. But if you do, just clean it with a bit of alcohol.
btw - Here's a bit of info from a previous post of mine...
The low beams consist of three parts. The bulb, inverter/ballast and the ignitor. The bulbs usually start to loose their color long before they burn out. The inverters/ballasts either go out after a while or take a while to start up.
Before you spend money on a new bulb, try swapping it with the one on the other side. You'll need a security torx screwdriver to get the covers off of the back of the lights. Don't touch the glass bulbs. If you do, just clean them with a bit of alcohol.
If the problem stays on that side, try swapping the ignitors. They're mounted inside the black covers.
If the problem is still on that side you've got a bad inverter. They're mounted on the bottom of the headlight assembly. You'll need to remove the front bumper and remove the headlight assembly to get to it. (I recommend you take pictures as you remove things so can put them back together correctly.)
Posted on Jan 05, 2009
it's a wire from under the dash it usually burns out after awhile,i had the same problem email me at firstname.lastname@example.org for more info on the wire i forgot the name for it.
Posted on Jun 13, 2009
your car could still be under warranty depending on the miles the car have call your Acura dealer for info. I had my transmission replaced in Feb 09 and it was done for FREE!!
Posted on Aug 07, 2009
Tips for a great answer:
Nov 04, 2015 | Honda Cars & Trucks
Oct 04, 2014 | 1999 Acura TL
Feb 18, 2010 | 1999 Pontiac Montana
Feb 16, 2010 | 2002 Jeep Liberty
Jan 07, 2010 | 1996 Acura TL Series
Dec 25, 2009 | 2002 Acura 3.2TL
Dec 10, 2009 | 1993 Acura Legend
Oct 25, 2009 | Ford Taurus Cars & Trucks
Jun 13, 2009 | 1996 Acura TL Series
257 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: