Question about 2006 Pontiac Grand Prix
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
as you face the engine the thermostat bell is on the right (drivers side) Follow the radiatoe hose. Remove the two bolts and raise the bell still attatched to the hose. the thermostat is there with the rubber seal. You can gently pry the thermostat out with a screwdriver or something similar. Put in new thermostat be sure it is the same as the old one, and then replace or change the seal (be sure it is the smae size and thickness as the old one as I got the wrong size from Napa) Then replace the bell, and tighten, but not over tighten. I hope this helps!
Posted on Jan 31, 2009
It's under the hood, on the driver's side, under a square, black box with a lightning symbol on it. Loosen the flower-shaped screw that holds the lid of the box down, remove the lid, flip it upside down and when you look at the inside of the lid, you'll see a map of all your car's fuses. There's also a fuse diagram on the very end of the dash, but it's accessible only when you open the driver's side door. When you're driving, that end of the dash is blocked by the closed door.
Posted on Jul 01, 2009
Yes, You can buy a manual at your lacal parts store.
However, It's not that hard. But , you didn't say if you
need to change the front or rear pads?
I'll assume your refering to the front.
1st You'll need to jack up the car if you only have one
Jack then, pick the side you are too start say left front.
Jack the car up like chainging a tire BUT, Jack the car
up but, leave the tire touching the ground with, some weight
still on the tire with a lug rench turn the lug nuts JUST enought
to loosin the nut DO NOT take the nut off, maybe 1/4 " only.
Do the same on the others. Now, Jack up the car until the tire
is off the ground. NOW, Put a Jack Stand under the car never
NOT use a stand. Remove the nuts and tire.
Turn the wheel to the right it will give you more room to work.
You'll need to remove the caliper that holds the pads on.
There are two screws that hold the caliper on. I believe,
there 13mm remove the screws (Take them all the way OUT)
Remove, The caliper the pads, will stay in the holder.
Remove, the pads you may need a screw driver to get the
pads out.There are two pads that have a scencer on them
one for each side PUT that pad on the inside holder.( sencer down)
NOW rember you need, too make room for te new pads.
You need a c- clamp to push the piston BACK into the
bottom of the caliper. Be sure the piston is at the bottom of the caliper
or the caliper will NOT fit back on. Install the new pads into the holder.
.Then, put the caliper back on to it's mount over the new pads.
Put the two caliper bolts back and, your done.
Reverse, the infromation from the top.
Posted on Jan 02, 2010
Testimonial: "Thank u"
Pontiac stopped installing the fuel filter on the rail in 2006. The 2004-2005 models had a fuel filter on the driver's side under the rear passenger seat area clipped to the frame. 2006 beyond the fuel filter is part of the fuel pump unit inside the tank.
Posted on Jun 01, 2010
Tips for a great answer:
Mar 16, 2017 | Pontiac Cars & Trucks
Oct 02, 2015 | 2006 Pontiac Grand Prix
Dec 31, 2012 | 2006 Pontiac Grand Prix
Dec 09, 2011 | 2006 Pontiac Grand Prix
Oct 23, 2011 | 2006 Pontiac Grand Prix
Sep 22, 2011 | 2006 Pontiac Grand Prix
Jan 15, 2010 | 2006 Pontiac Grand Prix
Jan 16, 2009 | 2006 Pontiac G5
191 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: