If timeing is right check cad convertor make shore thay are not clouged
SOURCE: 1999 toyota 4runner problem
Same thing happened to me, I had it computer analyzed and it turned out to be bad injector # 3, cost about $300 replaced.
SOURCE: fuel filter replacement 1999 4runner
Under vehicle, passenger side, below seating area, front of fuel tank, mounted on chassis
SOURCE: Can I replace a 1990 Toyota 4runner engine with a
check with your local Toyota dealer in the parts department and make sure you give them the liter of both engines and they can give you the correct answer and you can also try autozone.com to see if they have your car listed for diagrams pictures and step by step instructions if your car is not listed then try your local library they have all the car manuals and even copy them for you
SOURCE: 1990 454 mercruiser misfire under load when warmed up
Running on a stand is not the same as running under power...In the water, you are essentially running on a dynomometer (dyno is a big water brake) If you can prove that the module isn't putting in enough advance, it would be doing the same thing that I mentioned with the damper, only for a different reason. So...you're likely on the right track. (rather have a points setup out on the water...anything goes wrong, you fix it without a tow!!!!)
Good luck
35 views
Usually answered in minutes!
×