Question about 2001 Ford F150 Styleside SuperCrew
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: heater core replacement
It's one of the easiest cores to replace that I have encountered. Disconnect heater hoses at firewall. Probably doesn't matter about hose placement, but I always mark them just in case. To remove the fiber cover under dash, take a flat blade screwdriver and pry out the center pin of the expansion clips that hold it in place. There are four 5/16 head screws that hold the bottom/drain tray cover. Core will pull through the firewall and then down. You may have to silicone/glue or replace the foam seal strips on the new core. Before you install the core, check the distance between the inlet and outlet tubes to ensure they match the openings in the firewall. This saves time. It helps if you have someone on the outside to guide you when stabbing the tubes through the firewall. Replace bottom cover. You may have to hold one of the tubes when reinstalling the first hose to the core. Replace any lost coolant and check for leaks prior to reinstalling the fiber cover. If the cover seal is in good condition, any leak should drain through the firewall, otherwise it may leak inside cab. .
Posted on Sep 10, 2008
SOURCE: replacing heater core
Posted on Jan 21, 2009
allow the system to cool down
take radiator cap loose to release pressure
once pressure is released tighten cap
loosen clamps on the heater hoses in the engine compartment on the pass. side of firewall.
plug or cap off the heater core tubes to prevent spillage when you pull it into the truck
place a trash bag on floorboard in case spillage occurs
remove the five screws holding the heatre core access cover, three on top and two on bottom
carefully pull heater core back and down and remove it from the dash
install is reverse
Hope this helps
Posted on Mar 29, 2009
remove the glovebox and there should be a cover for the heater core there is five or six screws that hold it on remove the heater hoses and pull the heater core out
Posted on Jul 18, 2009
Tips for a great answer:
Jul 17, 2011 | 2001 Ford F150 Styleside SuperCrew
Nov 13, 2010 | 2001 Ford F150 Styleside SuperCrew
Mar 17, 2010 | 2001 Ford F150 Styleside SuperCrew
Feb 19, 2010 | 2001 Ford F150 Styleside SuperCrew
Jan 22, 2010 | 2001 Ford F150 Styleside SuperCrew
Jan 17, 2010 | 2001 Ford F150 Styleside SuperCrew
Nov 20, 2009 | 1997 Ford F150 Regular Cab
Oct 15, 2008 | 1998 Ford F150 Regular Cab
443 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: