Question about 2008 Saab 9-3

Open Question

2008 saab code p0700

Transmission in limp mode, code p0700

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

pippall
  • 1486 Answers

SOURCE: can a flat battery on a 99 saab 95 put the car in limp mode ?

have the guy to put a new battery on the car then try it.I would not buy it if he is not prepared to do that for you.The car only goes int limp mode if you have a bad fault.I doubt its the battery i haven't come across this before just because you have a flat battery

Posted on Jun 07, 2009

  • 1596 Answers

SOURCE: I am wanting to know

LIMP MODE ? I am CONFUSED With this Term. I Have Researched this On AllData and Found NO Such Term Used in My Resources and Have Not (in 30 yrs ) Heard this Term used If you Could Elaborate a Little More and Also Give the Model & Eng Size this Would Help Us Also.
there is Engine sizes>> 2.0 L, 2.3L ,2.5L .& 3.0L along with the Different Models. I / We Need A Little More DETAIL in your Explination of SYMPTOM you are Having with your Vehicle. I / We Woule Like to Help in a Fast and Eficient Manner with your Help We CAN Do This THANK YOU.
,Also Sorry to Take up too much Time Here

Posted on Nov 09, 2009

timsauto123
  • 750 Answers

SOURCE: have saab 9000 turbo tcs light came on in limp

YOU WILL HAVE TO RESET IT ON THE THROTTLE BODY,IF IT DOESN'T YOU WILL HAVE TO REPLACE THROTTLE BODY.










TIM

Posted on Feb 19, 2011

markmayes66
  • 786 Answers

SOURCE: 04 SAAB 9-3 THREE CODES P1743, P0735, P0734, TRANSMISSION WON'T SHIFT

Could be that a sensor has failed.My suggestion would be have local shop scan it....Could be so many things.......

Posted on Aug 17, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2003 chyrsler 300m it went in limp mode codes p0700. P0340 p0344 p0430 p0888 came up cleared the codes and now it knocks.


clearing codes wont correct the problem and limp mode is designed to protect motor and transmission - p0700 is a transmission problem
P0700 Transmission Control System Malfunction p0340 is camshaft position sensor malfunction
https://www.obd-codes.com/p0340 p0344 is also a camshaft position sensor circuit problem
P0344 Camshaft Position Sensor Circuit Intermittent your p430 is a cat converter problem
https://www.obd-codes.com/p0430 and p0888 is transmission relay problem these reasons are limp mode the knock can be fuel not burning correctly or a lower engine knock can mean you damaged a piston

Nov 08, 2016 | Cars & Trucks

1 Answer

I HAVE FAULT CODES P0563 AND P0700.DRIVING HOME AND HEADLIGHTS BECAME BRIGHT AND CHECK ENGINE CAME ON.TRANSMISSION SLUGISH FROM STOP TO START


P0563 reffers to the vehicles system voltage being high. Thus the headlights getting brighter. Usually caused by a defective voltage regulator built into the alternator. Replacing the alternator is the most common repair. P0700 is a transmission fault code set when something in the transmission control system is at fault. In your case, most likely the control module for the transmission also detected high voltage and put the transmission in limp mode causing the shifting issues you are experiencing. Have the charging system tested and repaired as necessary and the codes rest and the vehicle should go back to normal

Nov 08, 2015 | Cars & Trucks

2 Answers

My car is stuck in limp in mode I have replaced speed sensor and I'm getting p 0700 it's a 02 stratus I was told if I have the codes reset that the car should shift correctly


Incorrect information the code is because of a system malfunction and that is what is causing the shift problem. Resetting the code does nothing. Your code is transmission control circuit malfunction.

Sep 22, 2015 | Cars & Trucks

1 Answer

What are the probable causes of DTCs P0700 and P0765?


P0700 Transmission Control System Malfunction
P0765 Shift Solenoid D Malfunction
Clear fault codes and see if it comes back, if so,check wiring and plug for bad connection.

Sep 05, 2015 | 2007 Chrysler Sebring 2.4

2 Answers

I have a 2004 dakota codes p0052 p0732 p0720 p0731 p0700. Bought non running and had a 3.7 installed got back and it jerks when taking off and won't shift out of 1st gear. Limp mode? Any ideas?


P0700 Transmission control system malfunction
P0720 output speed sensor circuit malfunction
P0731 gear ratio error in first gear
P0732 gear ratio error in second gear

May 24, 2015 | 2004 Dodge Dakota

1 Answer

Grand Voyager 2.8 gearbox in limp mode


Its not related, the problem is on the transmission box selenoid

Nov 11, 2013 | Cars & Trucks

1 Answer

Gearbox malfunction appears on screen


the gearbox goes in limp mode if it detects any problem with either transmission or engine, if you have misfire in thengine,the transmission module might put it in limp home mode,have your car scanned for issues.

May 13, 2013 | 2005 Saab 9-3 Arc

1 Answer

2002 sebring tranmission P0992 and p0700


http://www.actron.com/webfiles/OBDII_DTC_Definitions.pdf this should help with codes

Feb 20, 2013 | 2002 Chrysler Sebring

1 Answer

04 Chrysler 300m goes into limp mode only when the A/C is on? i get P0700 and P1776 codes


P0700 is a general fault code for the transmission. P1776 is a fault code for the low/reverse solenoid inside the transmission. Since your problem is only present while the A/C is on, it is most likely electrical. Check your battery charge and your alternator performance FIRST, as either of these can cause this problem. Check the wiring to the solenoid, which is located at the front of the transmission. Finally, change the transmission control relay located inside the power distribution box ("fuse box") under the hood.

May 07, 2012 | 2004 Chrysler 300M

1 Answer

2000 voyager p0700 p0732 constant whine from transmission


seems to be time to take it to a professional

Jul 30, 2017 | 2000 Plymouth Voyager

Not finding what you are looking for?
2008 Saab 9-3 Logo

Related Topics:

231 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saab Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

74896 Answers

rgbypoet

Level 2 Expert

166 Answers

Are you a Saab Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...