Question about 1984 BMW 7 Series

Open Question

Location of the evaporator

What is needed to take out the evaporator? thank you glenn

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where is expansion valve located

The Expansion valve is located in the evaporator box

On this year Nissan it's not to bad of a job. The dash doesn't need to be removed like the newer cars.

  1. To replace the expansion valve, you will need to discharge the AC system. Remove the two AC lines from the evaporator.
  2. Then you will need to remove the glove box
  3. Then you will need to unbolt the evaporator box
  4. Tip it back and remove.
  5. Once you have the evaporator box removed, then you can replace the expansion valve. I would also clean the evaporator box as well since you will have it removed.

May 20, 2015 | 1998 Nissan Sentra

1 Answer


The A/C evaporator core orifice is located in the A/C evaporator core inlet tube. you will need to seperate the tube at the slip nut on the line. It is located in front of the battery routed along side the engine to the evaporator core

Aug 21, 2014 | Cars & Trucks

1 Answer

O2 Sensor

Hi Glenn, I'm glad to help!

Glenn, BANK 1 means the # 1 spark plug side of the head, so which every side of the engine holds spark plug # 1 is the side of the vehicle the sensor is on. SENSOR 2 means it is the down stream 02 Sensor. This means that the sensor that's close to the engine is sensor 1 and sensor that's farther away from the engine is sensor 2. Hope this helps and have an awesome day Glenn.

Jul 29, 2012 | 2004 Dodge Stratus

1 Answer

Looking for location of expansion valve f150 a/c

Your 2004 F150 uses what's called orifice with is located in the condenser to evaporator line. with Is the smaller line between that condenser to the evaporator. The location can be determined by the slight indentation in the line. thanks for using fix ya let us know how we did

Jan 07, 2011 | 2004 Ford F150

3 Answers

Where is the oriface tube for the a/c?

Hello TJ.
If yours is the S15 Jimmy it is mounted inside the inlet tube to the evaporator.
Number 142 in the diagram below.8692419.gif

If it is the full size Jimmy the orifice tube is located in the evaporator inlet pipe (high side line) at the liquid line connection.
You will need to undo #41 nut to get to it.
Here is a diagram.

This should cover your question.


Apr 29, 2010 | 1988 GMC Jimmy

1 Answer

1999 nissan pathfinder need to know where the expansion valve is located


The expansion valve is located in the High Pressure line very close to the evaporator, in the evaporator/blower housing under dashboard passanger side. To access it, need to remove evaporator.

Don't forget to rate this answer, Good Luck!!

Apr 18, 2010 | 1997 Nissan Pathfinder

1 Answer

Where exactly is the orifice tube located at on a 1996 (DOHC v6)?

it's in the high pressure liquid line.

A/C Evaporator Core Orifice The A/C evaporator core orifice (19D990) should be replaced whenever the A/C compressor (19703) is replaced for lack of performance (internal damage). The A/C evaporator core orifice, located in the condenser to evaporator tube (19835), cannot be serviced in detail as a component of the line. If replacement is necessary, follow the procedure outlined for Liquid Line Removal and Installation. An orifice tube replacement service kit may be used as an optional service procedure. Refer to Section 12-00 for information regarding the use of an A/C Evaporator Core Orifice Replacement Kit E5VY-19D695-A.
A/C Evaporator Core Orifice Replacement Kit Installation
  1. Discharge A/C refrigerant system. Refer to System Discharging and Recovery as outlined.
  1. Remove condenser to evaporator tube (19835) from vehicle.
  1. Locate A/C evaporator core orifice (19D990) by three indentations or a circular recess in metal portion of the condenser to evaporator tube.

    A/C Evaporator Core Orifice Location
  1. Note angular position of ends of condenser to evaporator tube so that it can be reassembled in correct position.
  1. Cut a 63.5 mm (2.5 inch) section from condenser to evaporator tube at A/C evaporator core orifice location. Do not cut closer than 25.4 mm (1 inch) from start of a bend in tube.

    A/C Evaporator Core Orifice Section Removed From the Liquid Line
  1. Remove contaminants from the two pieces of the condenser to evaporator tube.
  1. NOTE: The inlet half of the condenser to evaporator tube will be positioned against the A/C evaporator core orifice tabs when correctly assembled.

    Lubricate fitting with clean refrigerant oil and assemble orifice tube kit (with A/C evaporator core orifice installed) to condenser to evaporator tube. Make sure flow direction arrow is pointing toward evaporator end of the condenser to evaporator tube, and taper of each compressor ring is toward compression nut.

    A/C Evaporator Core Orifice Kit Disassembled Components

Jun 05, 2009 | 1996 Mercury Sable

1 Answer

How can i remove the evaporator from a 2002 jeep liberty

quite the project. go to autozone, online. go to repair guide section, and lookup heater core replacement, same area as evap and easier for you to follow, than my directions. good luck glenn

Jun 22, 2008 | 2002 Jeep Liberty

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Anthony Jones
Anthony Jones

Level 2 Expert

128 Answers

Frankie B

Level 2 Expert

65 Answers


Level 2 Expert

254 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides