Question about 1994 Oldsmobile Cutlass Ciera
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
First step is see the Condition of the oil.
Them you need to see if the ENGINE is NOT LOCKED UP.
To Do that, you will need a Rachet and Socket to Try TURN the CRANKSHAFT pulley by Hand.
If you are ABLE to Rotate,
And the Battery is good, Check all the Connection from the BATTERY to the STarter motor,
And the Ground Cable. From battery To the Chassis and the Bolt at the Transmission.
But if you are Unable to TURN over the Crankshaft Pulley.
The Engine is Locked up.
And will need to take a Opinion of a Mechanic .
To be sure Of the problem and the condition that may affect to the ENGINE went damaged.
I hope this help on your problem.
Thank you for use fixya...
Posted on Sep 24, 2008
maybe the wire is severed where the door (drver dr) pivots. thats what was wrong with mine. there is a rubber boot with crinkles in it that hold all the wires together. you can also try replacing the switch board that controls the wndws on the drvr dr. hope that helps.
Posted on Jan 20, 2009
the fuse box will be in 1 of 3 places (1)glovebox (2)under dash by drivers foot kick panel or (3) under hood .
Posted on Nov 22, 2009
Tips for a great answer:
Jul 27, 2012 | 1994 Oldsmobile Cutlass Ciera
Jul 02, 2012 | 1994 Oldsmobile Cutlass Ciera
Jun 14, 2012 | Cars & Trucks
Jul 09, 2011 | 1994 Oldsmobile Cutlass Ciera
Jun 04, 2011 | 1993 Oldsmobile Cutlass Ciera
May 19, 2011 | 1994 Oldsmobile Cutlass Ciera
Apr 11, 2011 | 1994 Oldsmobile Cutlass Ciera
Mar 28, 2010 | 1994 Oldsmobile Cutlass Ciera
Sep 09, 2009 | 1989 Oldsmobile Cutlass Ciera
101 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: