Question about 2002 Jaguar X-Type

Open Question

2002 Jaguar x type. Front drivers seat won't adjust up and down but motors sound like there working but no movement. All other adjustments work- forwad back and tilt. Only won't go up or down. Any ideas?

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emissionwiz
  • 75117 Answers

SOURCE: Why won't the driver's seat on my 2006 XJ8L won't adjust in height?

You have a problem with the power seat transmission. The 1st thing to do is make sure that nothing under the seat is impeding the movement of the seat, if that is OK you will need to try and find a used power seat transmission, the parts are not sold separately, just the whole assembly.

Posted on Feb 13, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2006 crown Victoria all electric functions on seat work except backwards!


Is it possible that switch has been installed upside down?

Apr 08, 2015 | Seat Cars & Trucks

3 Answers

2002 buick park avenue power drivers seat won't go up or down


The most common problem is the gear breaking under the seat. There is one motor to make the front go up and down and one motor to make the back go up and down. The front up/down motor is the easier one to replace. I have a video of one way to fix the up/down motors. I demo the back motor. Here is the link to my video: http://www.youtube.com/watch?v=wQLVvUf-9rs

Jun 30, 2012 | 2002 Buick Park Avenue

1 Answer

Why won't the driver's seat on my 2006 XJ8L won't adjust in height?


You have a problem with the power seat transmission. The 1st thing to do is make sure that nothing under the seat is impeding the movement of the seat, if that is OK you will need to try and find a used power seat transmission, the parts are not sold separately, just the whole assembly.

Feb 13, 2012 | Jaguar XJ8 Cars & Trucks

1 Answer

Drivers seat 2000 outback


So here is a diagram of the seat circuitry for your car. Since every other function works except the forward/backward slide function, that leaves basically the forward/backward slide motor, the seat switch, and/or the wiring. If you can verify that the wiring under the seat is in good condition without obstructions, chaffed wires, and/or wires pulled too tight, then it's safe to say it's down to just the motor and/or the switch. Sometimes if the passengers front seat has the same switch, you can plug it in to the drivers' side connector and see what works and what doesn't. If the seat works fine with the other switch, then that's all it needs, if not then it will need a motor. If the other seat doesn't have a switch then you can find them at wrecking yards, or just supply power and ground to the motor in question to see if it works. If it does, then you know you kneed a switch and if not then a motor.
I hope this info helps!~subyguru~
82066173

Nov 14, 2011 | 2000 Subaru Outback

2 Answers

Automatic driver seat broken, how to fix/cost


The back and foward movement uses the same motor. So if it moves one way but not the other it's most likely the switch. Try to blow it out or clean it out. If pop or somthing spilled on it you will prob. need to pull switch out and take it apart to clean contacks inside.

Nov 10, 2011 | 2005 Kia Optima

1 Answer

I have a 2002 VW Passat. The driver's seat is


cud be the switch or somethin lodged between the motor-try vacuuming-dont keep tryin cause motor will draw more amps

Aug 20, 2011 | 2002 Volkswagen Passat

2 Answers

Driver's seat stuck. Lumbard support works,


HI. There are only two causes for this particular issue. The most common will be a failed switch assembly. This should be located on the side of the drivers seat. This switch is responsible for transferring the movement commands to the actual motor/gear assembly, which is located on the rail structure under the seat in question. If your lumbar section is responding to commands, but the others fail, this will lead to a failed switch circuit. the entire switch board will need to be replaced, in this case.

Now, if you command the set to move forward, and all you hear is the motor running , but no movement, this will lead to a failed gear assembly. This will be the second cause of no forward/backwards movement. In this case, the entire motor/gear assembly will need to be replaced, due to the fact that the gears are not sold separately. The are shipped as a kit with the motor.


It is required that you order this type of replacement part directly from the dealership.



  • NOTE_ I have seen in most cases that the there was jam, due to pieces of the gear assembly breaking off, and jamming up the mechanism. in order to properly inspect for damage of this nature, it will be necessary to remove the seat.

Mar 26, 2010 | 2002 Mercury Mountaineer

2 Answers

Jaguar xJ6 X300 The electric seat has stopped working . I can hear the two relays clicking on the left hand side of the driver chair so assume the fuse is ok . Any ideas on how to fix it .?


the motors stick ( freeze ) i have heard that disconect the battery for an hour helps with this,and you may need to reprogram everything after..

Open the boot lid and drivers door, and switch on the ignition. Rock the valet switch, in the centre console, 5 times. The system will chirp to indicate it has entered learning mode.

On models with seat/mirror/steering wheel memory functions, the first remote will be linked to memory 1, second to memory 2 etc.

Press the larger, lock, button of the remote. The system will chirp to confirm it has got the signal. If it doesn't receive any signals for 15 seconds, it will chirp twice and exit learn mode.

To programme further remotes, rock the valet switch once. The system will chirp twice for remote number two, three times for number three etc, then press the lock button of the remote as above.

When finish, wait 15 seconds for the system to time out and chirp twice, turn off the ignition, close the doors and boot lid and the job is done!

Mar 03, 2010 | 1994 Jaguar XJ6

1 Answer

Jaguar 02 s type


Most probably you have a problem with the motor in charge of that function. If the seat goes front and back , that means that electrical is fine and you need to check one of two things : 1- Check the motor 2- check the Electrical Module for that seat

Aug 11, 2009 | 2002 Jaguar S-Type

Not finding what you are looking for?
2002 Jaguar X-Type Logo

Related Topics:

95 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75117 Answers

SPEEDY CAR WORK SHOP...

Level 2 Expert

489 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...