Question about Mazda Cars & Trucks

Open Question

How to remove Mazda 2 wiper blades

Removing and fitting wiper blades

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: rear wiper blade

I went to a Honda dealer and bought a replacement wiper blade (rubber part only) for about $6, and the guy in parts came outside and changed it for me. You slip off the rubber blade only from the wiper assembly and then slip in the new blade.

Posted on Jun 18, 2008

bibleman01
  • 334 Answers

SOURCE: remove rear wiper blade on saab 9-5 estate

Best way go to a parts store and ask for help and they would probably slip it on for you
God Bless you Greg

Posted on Dec 03, 2008

c17hydro
  • 2984 Answers

SOURCE: How to remove and replace the wiper blades on a 2006 BMW 325i.

My suggestion....go to Schuck's/Kragen?Chief's?Auto Zone....they will install them for FREE.

Posted on Mar 11, 2009

  • 14 Answers

SOURCE: Wiper Blades

lift the wiper arm all the way up and out from the windshiled. hold the arm so it doesnt slam back down and crack the glass. rotate/spin the whole wiper blade 90 degrees, counter clockwise, and then pull the blade straight back off the wiper arm. install the new one in the opposite order

Posted on Apr 13, 2009

auditech13
  • 43 Answers

SOURCE: how to remove audi a6 wiper blades

The problem with this wiper blade set up is the slides get jammed up w/ crude.  You should lubricate the slides and they should slide off.  Then carfully lift the arm and remove the blade.  Warning you should never leave the arm in the upright position.  Windshields get cracked this way.  Also note the pivit points the blades attach too.  These will normally sieze up and cause clearing issues even with new blades.  Lubricate these pivit points and use a pair of channel locks to move it back and forth until it will go 360 degrees with your fingers.  Install is in reverse order of removal. 

Posted on May 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove wiper blade assembly from a 1987 gmc jimmy


If you mean the blade itself and not the whole arm, do you have the original Pin type where it looks like a Pin pushed into a whole in the side of the blade? If so, it's a press fit so you can use a small flat blade screwdriver and gently pry between the arm and the blade at the Pin. Pull on the blade as you twist the screwdriver side to side to get past the press 'bump' inside the hole. It literally does just pull off of the arm, just need to wiggle and lots of strength sometimes.

25400119-dsfagzjiv5f4zgtpaj2ord4p-4-0.jpg

Feb 04, 2015 | 1987 GMC Jimmy

1 Answer

I can get the old wiper blades off my 2008 avalon but don't know how to put on new ones. do you have to remove something from old blade?


Hello,
  1. After you have removed the old wiper blade make sure to remove any adapter left behind on the actual wiper arm as the new blade should come with a multi use adapter.
  2. It should just be a bare metal rounded hook bar now.
  3. Now if there is not adapter on the new wiper blade then put the one provided on. Often times the wiper blade comes with this adapter already on the wiper blade.
  4. Pull the wiper arm out a bit and set the new blade under the open section of the wiper arm.
  5. That adapter will have a little play to it.
  6. Push it up a bit so it fits in the slot on the wiper arm and pull up on the wiper blade and the blade should "click" into place.
Do the same for the other side and your good to go. I also recommend Raine X for your windshield. My experience as a mechanic and a storm chaser has proven Rain X to be invaluable in severe weather.
Regards, Tony

Apr 23, 2011 | 2008 Toyota Avalon

1 Answer

How to remove wiper arm


Hello,

Please follow the steps below to remove or replace the wiper arm:
  1. With the hood closed, turn the wipers on, when the wipers are in the middle of their arc turn the key to the off position. (Note: if this can't be done because of wiper condition and you want to avoid scratching the windshield please open your hood to gain access)
  2. Locate the mounting clips at the top pivot on the wiper blade
  3. Release the clip and remove the wiper arm
  4. Match the size of the old blade against the new blade to ensure proper fit and operation
  5. Reinstall the new wiper blade and recheck wiper operation
Hope this helped. Thank You for using FixYa!!!

Jan 19, 2011 | 2004 Lincoln Town Car

2 Answers

Wiper blades


No removal of the arm is necessary. Typically, there will be a little lever on the wiper blade that will let the whole blade slide off the arm. 99fe16e.jpg Sometimes you'll have to hold it down and give it a little hit to make it slide off. The new one will slide on and click in.

Nov 16, 2009 | 1996 Mazda Protege

1 Answer

2005 honda odyssey wiper blades stopped working all of a sudden. can hear the motor but the blades won't move. you can move the blades manually


1. Open Hood.
2. Remove wiper arms by removing cap nuts. they are a tight fit . there is a puller for this.
3 Remove cowel cover . once cover is off you will see the wiper motor and transmission assy. Possibly a snap joint wore out oa nut holding motor drive arm in place loosened up.

Oct 25, 2009 | 2005 Honda Odyssey

2 Answers

How to replace wiper blades on a 2006 honda civic


there is a clip under the center of the blade itself push in on that and slide wiper off the armature replace simply by installing it the same way you removed the old ones they will click into lock by itself

Oct 16, 2009 | 2006 Honda Civic Hybrid

1 Answer

My drivers side windscreen blade, judders and drags up the screen, leaving lines of water. I have tried different blades, mazda screen wash, Rain X on the screen (which made it worse), Mazda said it was...


If the drivers side only dose it and not the pass side then dosent it spell that the wiper blad IS NOT THE CORRECT TYPE or the screen needs cleaning with Metho and cig ash and polish the screen with it and fit a set of blades to suite another car with the metal plate fitted outside to catch the the wind and hold on to screen,,,as alot of cars have the same lenth blade and the same fittings and the arms pivort could be worn. you wasted your money on the motor..

Oct 12, 2009 | Mazda MX-5 Miata Cars & Trucks

2 Answers

How do I remove front wiper blades to replace with new ones on my 2006 nissan quest


How to Replace Wiper Blades Guide:
Potential tools needed to replace wiper blades:
  • Flat blade screwdriver (small)
  • Small nosed pliers
  • Latex or vinyl gloves
  • Safety goggles
To replace wiper blades the actual action of replacing the blade is no big deal, it's the location of the blade down below the hood that can make it difficult though. Sometimes it helps to open the hood to gain access to the wiper blades. Other times it is helpful if the wiper blade is somewhere in the motion line of wiper action. The trick is to get the wiper to stop somewhere in the wiper arc. Turn the wipers to the on position and allow the wipers to start, and then shut the key off when the wiper has arrived in a desirable position on the windshield. To replace your wiper blades please follow the step by step instruction below. Also, watch the How to replace wiper blades video below to gain additional information. The method in which the wiper blades are attached will vary slightly.
  • Step 1: With the hood closed, turn the wipers on, when the wipers are in the middle of their arc turn the key to the off position. (Note: if this can't be done because of wiper condition and you want to avoid scratching the windshield please open your hood to gain access)
  • Step 2: Locate the mounting clips at the top pivot on the wiper blade
  • Step 3: Release the clip and remove the wiper arm
  • Step 4: Match the size of the old blade against the new blade to ensure proper fit and operation
  • Step 5: Reinstall the new wiper blade and recheck wiper operation

Common Problems:
  • Make sure the wiper blades are the same size as the original blades.
  • When replacing wiper blades not getting the blade on the mounting pin completely allowing the wiper arm to become dislodged and possibly causing damage to the windshield.
  • Using wiper blades after the blade has failed permanently damaging the windshield by craving scratches in the wiper arc.
  • Wiper blade can create a chattering noise when the blade is not properly balanced allowing the blade to "flop" back and forth as the wiper direction changes.

I hope help you with this (remember rated this help) Good luck.

Sep 14, 2009 | 2006 Nissan Quest

1 Answer

I changed the wiper motor out.  They worked without the blades on, but after installing the blades they tried to move down toward the hood.  I think the motor still works but it seems the shafts are just...


you may of fitted the blades when the wiper motor wasnt in park

ok remove wiper arms turn ignition on turn on wipers then turn of by wiper swicth not key motor will stop in park position fit wiper arms in positon try and your done

Jan 08, 2009 | 1997 Acura TL Series

1 Answer

Wiper blades


hi from uk to remove wiper blades? lift the wiper arm off screen to fully up then turn wiper blade upwards so as to make letter T then if you look at the horseshoe type bend on the arm? where blade fits you will see a little press clip which is part of the wiperblade fitting/securing ? to this blade u section just press clip in with finger and at same time push blade downwards out of the u part of arm then you can refit new blade/s the drivers and passenger wiper blades are different lengths when you fit new blades be sure the clip locks into place ? hope this is clear instructions to understand ?

Nov 16, 2008 | Hyundai Motor 1998 Accent

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...