1997 dodge Dakota cranks but will not start after clutch replaced

Question

Question about Dodge Dakota

1 Answer

1997 dodge Dakota cranks but will not start after clutch replaced

hoydhaas Jan 24, 2009

I CAN NOT GET THE RADIO TO PLAY THE FUSE BOX IS NOT LABLED SO I CAN CHECK THE FUSES CAN YOU HELP I TRYED TO HIND THE OWNERS MANUAL ON LINE BUT COULDNT

×

1 Answer

Sarah209

Level 1:

An expert who has achieved level 1.
Contributor
2 Answers

Fuel pump?Did you check out the clutch kill switch?

Posted on Jan 10, 2009

1 Suggested Answer

Add Your Answer

Upload

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

1 Answer

Replaced the slave cylinder on a dodge dakota now it wont start how do i fix it

The clutch slave cylinder shouldn't cause a no-start condition. If you replaced the clutch master cylinder there is a possibility that you may have to readjust the clutch safety switch in order to make it work to allow the engine to crank. If the engine cranks but doesn't start, you may want to look around down near the side of the transmission where you were working to ensure that you did not damage or remove the crankshaft position sensor electrical connector. If this is damaged or removed the engine will not start.

Aug 16, 2016 | 2002 Dodge Dakota Club Cab

1 Answer

My 1997 dodge dakota v6 3.9 auto 4x4 wont start replaced the ecu computer it will crank but wont start

Check for spark, and for fuel at the manifold. The ECU will not prevent you from cranking, but it does control fuel and spark.

Jan 10, 2015 | Dodge Cars & Trucks

1 Answer

Why won't my 1999 Dodge Dakota 5.2 start?

Could be.
Or a weak connection with one of the battery cables, or the key switch.

Sep 05, 2014 | 1999 Dodge Dakota

1 Answer

No spark in my 92 Dodge Dakota after replacing the clutch

the crank sensor is between the block and trans passenger side it always gets bumped or broken if not removed before removing or installing trans replace the crcrank sensor that shld do it

May 28, 2012 | 1992 Dodge Dakota

1 Answer

1997 dodge dakota want start in morng finly get it to crank ran fine till shut it off now next morning want start

replace the distributor cap and rotor

Apr 19, 2011 | 1997 Dodge Dakota

1 Answer

1997 Dodge Dakota 3.9L V6 won't start, but has spark and fuel and engine cranks

have timing of engine checked or replace starter.

Jan 21, 2010 | 1997 Dodge Dakota

1 Answer

1997 Dakota 3.9L A/C Clutch not engaging. I have

if you have power to the clutch and the R134 is full and you are sure of this then the clutch is bad it needs to be replaced.

Jun 23, 2009 | 1999 Dodge Dakota

1 Answer

97 dodge dakota

try the crank positioning sensor

Jun 05, 2009 | 1997 Dodge Dakota

1 Answer

No start on 1997 dodge dakota

check fuel pressure should be45 psi if so replace crank sensor

Jan 20, 2009 | 1998 Dodge Dakota

1 Answer