Question about 2003 Chevrolet Tahoe

1 Answer

Vehicle will not shut off after key is removed.

I have a AstroStart remote. When I use the remote to start the vehicle , it works fine. However, when I take the keys out, the vehicle continues to run. I have to use the remote stop button to shut the vehicle off.

Posted by on

  • doug629 Jan 10, 2009

    That works just fine when I use the key. It's when I start the vehicle with the remote I have the problem.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 2,920 Answers

Try starting it with the key and then try to shut it off with the key...

Posted on Jan 10, 2009

  • John Rainey
    John Rainey Nov 27, 2010

    Will it shut down when you hit the brake pedal? It should

  • Leana Hughes
    Leana Hughes Nov 27, 2014

    This happens to me as well - no the brake does not shut it off either - have to use the fob to shut car down

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Can I connect a astrostart remote key to my '08 Chevy uplander?


you need to notify astrostart since their are 4 different types of systems and give them the information on all the specs for your vehicle and they will advise how much and what additional components are needed

Jun 29, 2016 | 2008 Chevrolet Uplander

1 Answer

I have an Astrostart hst5224, It will star then immediately shut off. My jeep is A manual transmission


[PDF]MODEL RSS-5225 - DirectedDealers.com

www.directeddealers.com/manuals/OG/Astrostart/RSS-5225_OG-Eng.pdf
Immediately report any malfunction to the AstroStart dealer that performed the ... Always turn off the main switch when not using the remote starter for .... The startmodule will inform you of the status of door locks, the alarm and of the engine. .... If the trunk is opened for more than 5 minutes, the system switches to the.

How do you reprogram an AstroStart remote HST5224

www.answers.com > Wiki Answers > Categories > Cars & Vehicles
In order to reprogram an AstroStart HST5224 remote, you must putthe key in the ignition ... lamp) b, press and hold UNLOCK button, after 1 second key LED will flash once c, .... C. Turn the ignition to ON (Do NOT Start) then back to OFF. ... B.Immediately after letting go of the lock and unlock buttons, press the lock button by ..

Nov 24, 2015 | 2007 Jeep Wrangler Unlimited Rubicon 2...

1 Answer

AstroStart remote starter system will start my vehicle but then does not keep running. Runs less than 10-15 seconds.


that is a adjustment that has to be programed into youre remote start system. it can be found in the owners manual. it just needs to be programed

Dec 02, 2013 | 2005 Chrysler 300

1 Answer

Remote start works but shuts off right away


When you say right away....it is as soon as the vehicle starts....or is it 10-15-30 seconds later? Is this a factory remote start? If not, and you installed an aftermarket one, what is probably occurring is that your factory anti-theft system is seeing the vehicle running without the key in the ignition and activates the immobilizer which shuts down the vehicle. Aftermarket remote starts require adapter electronics to bypass the immobilizer until the operator enters the vehicle and inserts the key. This is why most aftermarket alarm systems are installed by trained pros.

Nov 05, 2013 | Dodge Grand Caravan Cars & Trucks

2 Answers

Astrostart won't start the car


You may need to reset the system.

SEQUENCE ACTIVATED BY THE PARKING BRAKE .
1. While engine is running (key in ignition switch), apply the brakes and hold the pedal down.
2. Move gearshift lever to neutral.
3. Apply the parking brake Once Twice
Note: The system can be set - at time of installation - to require that the parking brake be applied once or twice.
If set for two actuations, pause one second between the two.
4. Remove key from ignition (the system keeps the engine running).
5. Exit the vehicle.
6. Within 60 seconds, close all doors.
7. The system will stop the engine and blink the parking brakes once to confirm the sequence is valid (vehicle is
ready for a remote start command).
SEQUENCE ACTIVATED BY THE REMOTE CONTROL
1. While engine is running (key in ignition switch), apply the brakes and hold the pedal down.
2. Move gearshift lever to neutral.
3. Apply parking brake.
4. Send the start command (Model 801 & 2101 - Model 903 ).
5. Remove key from ignition (the system keeps the engine running).
6. Exit the vehicle.
7. Using the remote, send the STOP command. The system will stop the engine and parking lights will blink once
to confirm that the sequence is valid (vehicle is ready for a remote start command).
http://www.astrostart.com/Support/Guides.aspx

Nov 27, 2012 | Cars & Trucks

1 Answer

Astrostart 2100 autostart will not work all the time


It would almost appear that your battery is weak. If the engine doesn't freely turn over the remote start will not work because it recognizes the problem. I would also hope that you plug in your block heater when it's really cold.

Feb 06, 2012 | Chrysler Town and Country Cars & Trucks

Not finding what you are looking for?
2003 Chevrolet Tahoe Logo

401 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...