Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: no dome light on tacoma
The dome light gets 12 volt battery power at all times. The door switch, when the door is opened, allows the current to flow to ground, and completes the circuit. The door switch allows the ground to be made. Measure for 12 volts at the wiring connector, and measure for direct short at the ground wire, with the door open. The Ground wire is white with a black tracer.
Posted on Feb 27, 2009
See this alot. Sorry,It appears that is a symptom of a bad motor. If it moves an inch or so,then nothing,after a few minutes another inch or so,it's motor time!
Posted on Apr 08, 2009
The best solution is to use a Vehicle Specific Wiring Kit, as these cars have complex electronics that do not like being overloaded, Also the car has towing specific safety systems (such at Trailer Stability Program) which only work if it knows it is towing. The car will need to be coded to recognise the towbar wiring and work the saftey systems properly after the kit has been installed. It's not cheap however, Expect to pay around £200-£250 for the whole job.
Posted on Jul 21, 2009
The drivers door window switch probably needs replacing.The control units are built into the window motors.Best of luck.
Posted on Aug 05, 2009
Tips for a great answer:
Mar 05, 2017 | Hyundai Cars & Trucks
Feb 11, 2017 | Saturn Cars & Trucks
Oct 13, 2016 | Cars & Trucks
Jul 28, 2016 | 2003 Chevrolet TrailBlazer
May 23, 2014 | 1997 Isuzu Trooper
Nov 24, 2012 | Cars & Trucks
Aug 17, 2009 | 1997 Jeep Grand Cherokee
May 20, 2009 | 1997 Volkswagen Jetta
46 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: