Need to replace left year brake light bulb in a 1993 Voyager
How and where does one get to the bulb? Inside or outside? Opening the rear hatch exposes two screws and there are two screws at the top of the red lense (outside). Just wanted guidance before I tried to do it "the hard way." Thanks
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need. goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
spray wd40 in the lock keep turning it left and right, then tap the boot lock with a hammer gently and pull ard sometimes they stick on these cars. quite common. otherwise get into the boot via the back seat and expose the lock from the inside once you can see it push the latch over and it will open.
You will need to look in trunk and pull back the covering over the light area on the side you need to replace. Once exposed, look for the wires going into the light housing and twist the plug to unlock it and remove the bulb. Twist and remove the old bulb or Pull the bulb out of the socket. Reverse the process to install the new bulb and replace the socket.
Open the rear hatch, look inside left or right and theres a small cover, remove and inside will be a small knob, unscrew completely, get a taped flat blade screw driver or a plastic interior tool and go around the outside of the light assembly and gently pry outward......bulbs on inside.......good luck
this is not a bulb u must replace the entire LED fixture, to do this remove the inside trim at rear around rear hatch opening, then you will need to drop the headliner down to access the retainers that hold the third brake fixture in, very easy job.
1. Remove 2 plugs attaching liner to body to right/left of left/right light assembly. 2. Gently pull back liner to expose rear of light assembly. 3. Remove three 10mm nuts from exposed bolts. 4. Assembly now held in place by a plug in assembly that goes into a white plastic plug that extends into trunk under single bolt [See no. 3). 5. Pull to rear with wiggle movement to pull out plug. Takes a little while.
If you need to change the light bulb for brake lights:
First you need to open the rear hatch then drop down the tail gate. You will notice that there are 4 screws total for each brake light assembly. 2 on the inside where the tailgate was blocking and 2 on the outside of light. Unscrew them all and the assembly will come right off giving access tot he light bulbs.
open the rear hatch. Next to the brake light assembly, between it and
the hatch there are two flap doors in the brake light trim. Take a
small flat blade screwdriver and open these doors. The hinge side of
the flap is nearest the hatch opening. When opened, the flaps will
reveal two screws. Remove these. Then wrap a flat blade screwdriver
with some tape (protects the paint) and put the blade at the front
outside corner of the brake light assembly. Pry gently rearward and a
plastic spear point clip will release. With the assembly off, you can
see how to twist out the bulb sockets and replace the bulbs. to
replace, put the spear point clip in first, replace the screws, and
close the flaps in the trim.
open the rear hatch. Next to the brake light assembly, between it and the hatch there are two flap doors in the brake light trim. Take a small flat blade screwdriver and open these doors. The hinge side of the flap is nearest the hatch opening. when opened, the flaps will reveal two screws. Remove these. then wrap a flat blade screwdriver with some tape (protects the paint) and put the blade at the front outside corner of the brake light assembly. Pry gently rearward and a plastic spear point clip will release. With the assembly off, you can see how to twist out the bulb sockets and replace the bulbs. to replace, put the spear point clip in first, replace the screws, and close the flaps in the trim.
open the rear hatch. Between the tail light housing and the rear hatch opening there is a trim strip with two flush fitted flap doors. Insert a small straight blade screwdriver into the small slot on the tail light side of the flap. Pry gently inboard and the small flap will open (the hinge side of the flap is on the side of the rear hatch opening.) Now you can remove the screws that hold the tail lamp assembly in place. Finally, there is still a "spear point" clip that fits into a socket near the front outboard corner of the assembly. Gently pry with a tape wrapped screwdriver (avoids scratches) and force the assembly straight back. The clip should release and free the assembly so you can change the bulb(s).
Open the back hatch and in the well of the hatch you'll see two big screw that hold the black trim that holds all the lights on the rear right side and the same for the left. Once you take of the whole console (it's a little tricky you'll have to pivot it like opening a car door for it to come off) inside back you'll see all the light socket pushed into the console. Turn and pull out for each socket and then you'll see each light bulb. from there just replace the bulb.