Question about 2005 GMC Sierra

1 Answer

05 gmc doesnot shift

05 gmc ext.cab 4x4 auto. stays in hi gear if you unhook battery truck will shift first time you take off when you stop and start truk doesnot shift gears start off in hi gear.

Posted by on

  • ernie_bowman Jan 22, 2009

    Truck takes off in 2nd gear.Have to shift manually to go in 3rd gear.No fourth gear.Took it to tranny specialist but didn't know where lost of power was.Engine light is on.Speedometer is also sticking.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 180 Answers

Trans is in safe mode, you will have to get scanned to see codes.

Posted on Jan 10, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to use the 4x4


well, if you are sitting still it is recommended you put vehicle in neutral and select 4x4 indicator to desired posistion..... 4 high...4 low...or 2high (auto) when you select 4 low the top speed is not to exceed 25 mph. It is a very low gear for crawling or pulling. At any time you need 4 low gear you must stop trk, shift to neutral and select 4 low. The same procedure is done to change from 4 low to 4 hi or 2 hi. if not done this way internal trans, transfer case or driveline failure will occure. At any time you may shift 4x4 selector from (auto) or 2 hi to 4 hi, and 4 hi to 2 hi or( auto).****** But note, do not make shifts while tires are spinning or under power (acceleration)******* While driving you can make shifts at any speed between 2 hi (auto) and 4 hi and back to 2 hi. release throttle a little and select. you do not have to take foot off throttle all the way! just enough that truck is not under a power, load acceleration. If tires are spinning or you are on the gas and you select gears from 2 & 4 high the posibilities of severe damage can result. Also note that 4x4 is not recommended on dry pavement. When 4x4 is being used also take care as to the handling and the steering characteristics change, On tight turns the front wheels will bind and possibly **** a little. If you have never had a 4x4 before, obey what i have told you untill you get the experiance and you will be fine. HAPPY TRAILS.... AND A LITTLE 4X4 FUN!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Jan 12, 2011 | 1998 GMC Jimmy

1 Answer

I have a 2004 gmc ext. Cab 4x4 short box pu gvw is 8100 plusis it legal to pull a 6164 lb 5th wheel trailer????


the gvwr is the calculated weight the the truck can carry in the cab and the bed combined, it is not the towing capacity, the towing capacity can be found in your owners manual. I hope this helps you, good luck !

May 10, 2010 | Cars & Trucks

1 Answer

We have a 91 gmc sonoma sle. can it be coverted to four wheel drive, from another sonoma?


I have two. A 91 s15 ext cab 5-speed 4x4, 4.3L with a flatbed and 89 s10 ext cab auto 4x4, 4.3L with a box. Make an offer around $500 and thier yours.lol

Apr 11, 2010 | 1991 GMC Sonoma

1 Answer

Auto Trans shifts from 1st into OD then engine runs rough


need more info need to scan and post the codes pulled

Sep 01, 2009 | 1998 GMC Suburban

1 Answer

1993 GMC 1500 4x4 poor shifting


this may be due to a poor connection at the vehicle speed sensor on the transmission, pull the connector off the sensor and clean it with contact cleaner, if the problem persists replace the speed sensor. there are 2 diff ones here is a picture of the most common one for an auto trans.3deea43.jpg

Mar 26, 2009 | 1993 GMC Sierra K1500

1 Answer

1996 Chevy 4X4 Problem with Transfer Case & Transmission?


check vaccum actuator on front diff?use vaccum gauge should be 25 to 30lbs to open had same problem 94 gmc sierra ext cabb 4x4 5.7 ordrive tranny

Mar 12, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

F-150 4x4 ext. cab stepside


check the linkage for play it it.it may have vibrated loose or try shifting it manually under the truck to see if you can do it by hand. do not do it while the truck is running.

Aug 09, 2008 | 2003 Ford F150 Regular Cab

Not finding what you are looking for?
2005 GMC Sierra Logo

Related Topics:

165 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...