Question about 2007 Kia Sedona 3.8

1 Answer

Passenger sliding door will not work automatic

When I press the button nothing happens,Have to open door manually

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 645 Answers

Automatic sliding doors use optical or motion detection sensors to activate their motorized opening and closing functions. These sensors are mounted over the automatic door. The sensors use either infrared or microwave technology to observe motion.------------------------------------------------------------------------------
Car Diagnostic Tools

Posted on Nov 29, 2012

Testimonial: "Thanks I never thought of looking over the door for the infrared sensors. I will check that out"

  • Made Dec 03, 2012

    checked for the sensors above the door but could not find them. I am taking the van in to the dealer today and find out what they say it is. I will let you know Thanks.

  • Victor Dec 04, 2012

    i am very glad that i can help you

×

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 20 Answers

SOURCE: 2007 Kia Sedona van power sliding door

i just had to have this fixed on my 07 sedona on the bottom arm for the doors there are litle lock solinoids that go bad i would take it to a dealer to have it checked for the switch you can turn the power off to the doors and open them manualy but they are hard to open because you are pulling the cable instead of the motor doing it and this will not hurt the doors

Posted on Jan 30, 2010

johnf1aresti
  • 1121 Answers

SOURCE: 2006 passenger sliding will not open ipush button and it makes noise but will not open

it is probably the motor inside or the wired sliding pulleys and broken off. You have to strip the door.

Posted on Sep 15, 2012

  • 1 Answer

SOURCE: Can not open the passenger side front door from

problem with audi a6 quatro. I cant open front seat door from outside. what i have to do? should i take it to car- repair place, or i can fix it by myself?

Posted on Dec 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kia Sedona sliding doors not working properly


hi adjust and reline the sensor limits to the door

Jan 28, 2018 | Kia Sedona Cars & Trucks

1 Answer

Opening the drivers door doesnt automatically open the passangers door


Some vehicle locking systems allow a single button press to unlock the driver's side door and require a second button press to unlock the passenger side door. Likewise, use of the key to unlock the driver's side door does not automatically unlock the passenger side.

Mar 25, 2014 | Dodge Stratus Cars & Trucks

1 Answer

2008 ford f 150 king ranc


it sounds like a earthing problem like if the radio is staying on etcetera. if you can take to the ford dealer and describe it to him in person or an auto electrician.

Jan 27, 2014 | Cars & Trucks

1 Answer

Passenger Side Sliding Door Lock is not working


Sounds like it., check and clean connections to button first.

Jul 09, 2013 | 2012 Dodge Grand Caravan American Value...

1 Answer

2007 dodge caravan automatic sliding doors open when keys are in pocket


Keep the keys out of your pocket. Something is touching the open switch in your pocket.

Jun 13, 2012 | 2007 Dodge Caravan SXT Minivan New Cars

2 Answers

Remote door opener


So, you get out your remote control to your garage door opener and, then get your owners manual to your new car. You need to follow the instructions from the manufacturer to be able to program the remote control to the car.

Ok, you have followed the instructions from the car manufacturer and you press the button for the garage door to go up.......and nothing happens. So, then you think you have missed a step on the programing. Well, what most instruction manuals leave out is the step from programing the car/truck/van to the garage door machine itself. On the back side of your garage door opener is a panel called the logic board. The logic board is the computer or brain of the machine. Most new garage door openers now are a mulit-code machine. By that, i mean it uses several signals each time you press the button on your remote control. This is for security, so your code can't be stolen by a code-grabber.

Now, comes the step of programing the vehicle to your garage door opener. Once you have followed the instructions of programing your vehicle, you now have to "teach" the car to the garage door opener. You will need some help doing this. You will have to get someone to press the button in your vehicle and hold it down, while someone else has to press the learn button on the back your your garage door opener mounted on the ceiling. The learn button on the back of your machine will be square if using a liftmaster machine. Craftsman, Liftmaster, Chamberlain are all the same. Their learn buttons are square, and usually are yellow, red/orange, or purple. If using a Genie, it has a button that says "learn button".

The person pushing the button on the machine will only have to push and release the learn button. DO NOT hold this button down. If you do, it erases all of the programing in the machine, and you have to re-program all the remote controls that you have. You will have to read my other hub to find out how to do that. You will probably say a few words you shouldn't either. :-) Programing the vehicle to the machine only takes a second, and when the machine accepts the code, the light bulb on the machine should flash for a brief moment, and you should hear audible click. Yep, it's that easy! I dont know why the auto makers leave that step out. Anyway, i hope this helps, and if you have any questions.. leave them in my comments and i will try to walk you through it. See the photo above and you will see the typical logic board...the square red/orange learn button is easy to see. Just remember to press and release

May 08, 2012 | 1995 Lincoln Town Car

1 Answer

The central locking makes a sound like it wants to lock when the button is pressed, but nothing happens. Everything that normally happens when the button is pressed happens except for the 2 front doors...


You will probably need to remove the door panels and spray the lock mechanisms heavily with wd40 or similar.They are common to seize up and do this,also the little spring on the mechanism latch lever rusts and breaks,causing the door not to open at all,only by actuating with some difficulty the lever with a flat bar down past the window.I have seen some of the remote lock actuators seize on doors other than drivers,so that the doors wont lock.lube in behind the rubber bellows that waterproofs the actuator rod. while inside doors.
Hope this helps you or get back to me with your findings.

Apr 03, 2011 | Hyundai Accent Cars & Trucks

1 Answer

I have a 02 audi a4. When i press the button on my key for the central locking to open he door nothing happens and the battery is fine in it. When i put the key in the drivers door it opens and when i put...


NOTE: If key buttons operated repeatedly while vehicle out of range or batteries replaced and system becomes inoperative, proceed as follows:
Press one of the buttons. Manually lock and unlock driver's door within 30 seconds. System should operate normally after approximately 1 minute.

Jun 22, 2010 | Cars & Trucks

Not finding what you are looking for?
2007 Kia Sedona 3.8 Logo

670 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

yadayada
yadayada

Level 3 Expert

80417 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...