Question about 2002 Oldsmobile Alero
My check engine and trac off and trac low and abs lights come on ?
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Hi, there I solved it myself turns out it was the driver front Abs sensor. the bearing had to be replaced because the Abs sensor is build into the bearing.
Posted on Dec 01, 2008
The first thing i would check is all 4 abs sensors at the wheels.You can do this with a volt meter set on ac voltage and spin the wheel if it generates voltage at all on the meter its good.
Posted on Mar 06, 2009
does the rpm motor kick down? you may need to check your vacuum hoses, and also you may want to check your exaust, sounds wierd but that can cause the car to stall at times.as for the traction light, your hitting the brakes to hard. try slowing down a little slower while stopping, and keep distance for saftey.. if you can take it a little slower at lights and turns, without braking hard and it stops stalling.
Posted on May 20, 2009
I suggest that you visit the autozone.com website and register the vehicle. It doesn't cost anything and will give you access to an online repair manual. The steps for replacing the water pump should be available there. Hope this helped and best wishes.
Posted on Sep 01, 2009
Have the ABS codes scanned. This will get you started in the right direction. Possibility is that one or more of the wheel speed sensors is not working or intermittent - could be wiring or connectors on these as well. Another possibility is the EBCM, Electronic Brake Control Module. I believe the EBCM will throw 1216 code in many cases. THese can be rebuilt online for about $150.00.
The more likely problem is the wheel speed sensors. THese are an integral part of the wheel hub. About $100.00 each for the part. About $250.00 each to have them replaced. They can be tested with an AC voltmeter by spinning the wheel. Also, they should read roughly 850 ohms resistance. The ABS codes will tell you which ones are not reporting.
Posted on Nov 17, 2009
Tips for a great answer:
Jul 08, 2011 | 1999 Oldsmobile Alero
May 29, 2010 | 2002 Oldsmobile Alero
Apr 18, 2010 | 1999 Oldsmobile Alero
Mar 10, 2010 | 1999 Oldsmobile Alero
Feb 28, 2010 | 2002 Oldsmobile Alero
Oct 25, 2009 | 1999 Oldsmobile Alero
Jul 08, 2009 | 2000 Oldsmobile Alero
Jun 23, 2009 | 1999 Oldsmobile Alero
Jan 09, 2018 | 2002 Oldsmobile Alero
53 people viewed this question
Usually answered in minutes!