Question about 2000 Cadillac DeVille
It drives good into it comes to a complete stop i have to cut it off n sit for awhile then when it starts back up it goes...
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
you can reset the system by turning key to on position for 5-10 mins and then try starting it but its probably a short or grounding prob try the engine to chassis ground
Posted on Oct 03, 2008
If you like go ahead and let someone sell and replace your transmission but here is my suggestion! Check around and see if you can find a minor vacuum leak! This can simply be the big round hose that goes from the fuel injection to the power brake hub! This is normally a push in connector which has about a 1/2 inch hose clamped on it! If there is any kink or the connector is not in correctly a leak will occur and the transmission will shift rough as though you will be thrown out of the vehicle! Try unplugging this connector and plug it back in hard and straight and maybe you will be lucky and fix your problem. If the vacuum is correct your transmission will shift better than you have ever experienced!
Posted on Aug 16, 2009
If your fans are not coming on then your engine is not receiving the signal that it is overheating. This can be caused by bad fans (unlikely they are both out) a bad relay, or coolant temperature sensor. I would start by checking or replacing the temperature sensor as it can become corroded which is what the PCM uses to turn the fans on. Many vehicles use two sensors, one for the gauge and the other for the ECU, make sure you check/replace the right one. It should be a cheaper part and if you are unsure then match the new one with its location; it should be on the intake manifold or near it, generally with one or two wires. I think you will find your problem as they are common failed parts.
Posted on Aug 30, 2009
Tips for a great answer:
Jan 10, 2016 | 1993 Cadillac DeVille
Sep 27, 2014 | 2000 Cadillac DeVille
May 18, 2017 | 2000 Cadillac DeVille
Aug 05, 2009 | 1997 Cadillac DeVille
Aug 03, 2009 | 1997 Cadillac DeVille
Mar 30, 2009 | 2000 Cadillac DeVille
93 people viewed this question
Usually answered in minutes!