Question about 2004 Chevrolet Malibu

Open Question

2004 Malibu oil life reset

Reset oil life

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

traceylewis1
  • 363 Answers

SOURCE: how do I reset the

While the vehicle is in Park, you need to hold down "info" and the enter (<-) key for a few seconds.. that will bring you into advanced options.. I believe oil reset is the first option that will show up. Just select that and it'll revert back to 100%.

Hope this helps and please rate my help thank you and good luck

Posted on Dec 02, 2010

  • 76 Answers

SOURCE: I changed the oil in my 2007 Tahoe oil life won't reset

most gm models you turn the ignition to the run position(key on engine off) and depress the accelerator 3 times this should reset your oil life.

Posted on Mar 25, 2009

  • 77 Answers

SOURCE: resetting my oil life on an HHR

Turn key to "on" position. Fully depress and release gas pedal 3 within 5 seconds. Turn key off. Should be reset now.

Posted on Apr 30, 2009

  • 1 Answer

SOURCE: 2004 suburban, need to reset my engine oil life on

engine off key on mash gas pedal 3 times to the floor oil life rest.

Posted on Jun 28, 2009

  • 462 Answers

SOURCE: oil filter location 2004 Chevrolet Malibu Classic

Standing at the front of the car looking at the intake manifold, its on the right hand side of the manifold about 6 inches down from the valve cover under a black cap with a 32mm top on it.

Posted on Jan 04, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to shut off the change oil light when you change the oil


The instruction are on page 112 of manual (link to PDF below)
Driver Controls (Oil Minder)
Reset oil life mode
To reset oil minder when the vehicle oil is changed:
1. Press the MODE button repeatedly until one of these three
messages is displayed; OIL LIFE XX%, CHANGE OIL SOON or
CHANGE OIL NOW.
2. Press and hold the MODE button for 5 seconds until RESET FOR NEW OIL LIFE is displayed.
3. Press and hold the RESET button for 2 seconds. The oil life value will be reset to 100%
Note: If the RESET button is not pressed after one minute of no activity, the original oil life will be restored.
Note: If power is interrupted during the reset oil life mode, the overhead console resets the oil life to the original value

http://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=6&ved=0CD4QFjAF&url=http%3A%2F%2Fwww.fordservicecontent.com%2FFord_Content%2Fcatalog%2Fowner_guides%2F04towog3e.pdf&ei=_PMKVYDFJ8uzggTVu4O4BA&usg=AFQjCNF9G4vX0SZxPrj6C7W5R3BltU7cPA&sig2=XEB

Mar 19, 2015 | 2004 Lincoln Town Car

1 Answer

How do i reset my manint req's light after an oil change on a 2003 Honda pilot


Reset oil service light Honda Pilot. From years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012.
How do you reset oil service light Honda Pilot. From years: 2003, 2004, 2005.
  1. Turn off the engine. Press and hold the SELECT/RESET button in the instrument panel and turn the ignition switch to run (one position before starting).
  2. Hold the button for at least 10 seconds, until the indicator resets.
  3. Turn the ignition off and then start the engine to verify the indicator has been reset.
How to reset oil service light Honda Pilot. From years: 2006, 2007, 2008, 2009, 2010, 2011, 2012.
Resetting the Engine Oil Life Display if maintenance service is done by someone other than your dealer, reset the maintenance minder as
follows:
  1. Turn the ignition switch to the ON (II) position.
  2. Press the select/reset knob repeatedly until the engine oil life is displayed.
  3. Press the select/reset knob for about 10 seconds. The engine oil life and the maintenance item code(s) will blink.
  4. Press the select/reset knob for another 5 seconds. The maintenance item code(s) will disappear, and the engine oil life will reset to 100.
All information is taken from the Honda Pilot owners manual.

Mar 09, 2015 | 2003 Honda Pilot

2 Answers

How to clear the change oil message in the information center on a 2004 Tahoe


GM OIL LIFE SYSTEM - RESETTING
Reset the oil life monitor when the oil has been changed, use the following procedure.
1. Turn the ignition key to the RUN position.
2. Fully push and release the accelerator pedal 3 times within 5 seconds.
3. If the Change Oil Soon light flashes, the system is resetting.
4. Start the vehicle.
5. The oil life will change to 100%.
6. If the Change Oil Soon light comes back on, the system has not reset. Repeat the procedure.

Nov 27, 2011 | 2004 Chevrolet Tahoe

1 Answer

I need to know how to update the 2009 malibu oil life


turn key to acc. push gass pedle to floor 4 times it will reset the oil life read out .

Aug 24, 2010 | 2009 Chevrolet Malibu

1 Answer

How do you reset oil light 2006 sts


Cadillac 2003-06 CTS, 2004-06 SRX with base audio system, 2005-06 STS
Press the up and down arrow on INFO button on right side of driver information center display to access the DIC menu. Once 100% Engine Oil Life menu is highlighted, press and hold the CLR button. The percentage will return to 100 and oil life indicator will be reset. Repeat steps if not reset to 100.
Cadillac 2003-06 CTS, 2004-06 SRX with Navigation System
Turn the system on by pressing the PWR/VOL knob once located at lower left of DIC display. Pres INFO button located to the left display to access the vehicle information menu. Turn the TUNE/SEL knob located at the lower right of the display until engine oil life is highlighted. Press the knob once to select it. Once the 100% engine oil life is displayed, press the multi- function button next to the reset prompt in the upper right corner of the display, the percentage will return to 100 and the oil life indicator will be reset. Repeat steps if not reset to 100.

Dec 13, 2009 | 2006 Cadillac STS

2 Answers

How do I reset the gauge in the car since I have changed the oil? I oil light is at 3%, I want it to reflect the amount of oil life left until I need to replace it again.


Here is what you do. Press the mode button untill you get to oil life %. Once you are at the oil life % now you hold the mode button for 5 seconds or untill RESET FOR NEW OIL LIFE is displayed. Now press the reset button now oil life should say 100%.

Nov 05, 2009 | 1994 Mercury Grand Marquis

2 Answers

I cannot get the Change Oil Soon message to reset on a Pontiac G6


Chevrolet Malibu, Malibu Maxx 2004-06; 2006 HHR, Cobalt, Pontiac G6, Solstice
Turn ignition to run engine off. Display OIL LIFE RESET in the Driver Information Center (DIC). Press and hold the ENTER button for at least one second. An ACKNOWLEDGED’ display message will appear for three second or until the next button is pressed. This will tell you the system has been reset. Turn the key to OFF. If the “CHANGE ENGINE OIL” message comes back on when you start your vehicle, the engine oil life system has not reset. Repeat the procedure.

Jul 17, 2009 | 2007 Pontiac G6 GT Convertible

2 Answers

I have a 2008 chevy malibu and i just had my oil change..how do you reset the oil sensor to 100%?


  1. Display "OIL LIFE RESET" on the Driver Information Center (DIC).
  2. Press and hold the "ENTER" button for at least one second. An "ACKNOWLEDGED" display message will appear for three seconds or until the next button is pressed. This will tell you the system has been reset.
  3. Turn the key to "LOCK/OFF". If the "CHANGE OIL SOON" message comes back on when you start your vehicle, the engine oil life system has not reset. Repeat the procedure.

Jun 25, 2009 | 2008 Chevrolet Malibu

1 Answer

I changed my oil on my LX and the change oil warning is not reset


RESETTING THE ENGINE OIL LIFE INDICATOR
On LX and EX models

If maintenance is done by someone other than your dealer, reset the maintenance minder as follows:

1. Turn the ignition switch to ON ( II ).

2. Press the SELECT/RESET knob until the engine oil life indicator
is displayed.

3. Press the SELECT/RESET knob for about 10 seconds. The engine oil life indicator and the maintenance item code (s) will blink.

4. Press the SELECT/RESET knob for more than 5 seconds. The maintenance items code (s) will disappear, and the engine oil life indicator will reset to "100".

Jan 01, 2009 | 2004 Honda Odyssey

Not finding what you are looking for?
2004 Chevrolet Malibu Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...