Question about 1997 Lincoln Continental

1 Answer

How do I remove the rear light panel on my 1997 lincoln continental

I took the Carpet panel off and the 5 dime size screws and the two on the sides and the panel still won't come off.

Posted by on

Ad

1 Answer

I assume your referring to the plastic studs on the rear lamp housing
& the tin pal nuts

Have to use a small screw driver under them & a socket on the nut

Posted on Nov 28, 2012

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: 1997 Town Car - How do you remove the complete dash board panel?

There are 3 small bolts across the top where the front defrost grill is. 2 large bolts directly under the headlight switch and another big bolt lower right hand corner of the glovebox area.

Posted on Feb 19, 2009

ancdlm
  • 58 Answers

SOURCE: 1997 Lincoln Continental Air Ride - rear how to diagnose problem

It sounds to me like you have a hole or cracks in your airbag. The dealership typically diagnoses it as the compressor but that is only to keep you coming back and wasting more money on something that will never truly be fixed. The airbag is the problem now but the compressor has to work extra hard because it is like blowing up a balloon with a hole in it. Therefor the airbag will kill the compressor. I would recommend going to strutmasters.com and taking a look at our conversion kits. these convert you from the airbag to a powder coated American made steel coil spring that is guaranteed to last the life of the car. This is a PERMANENT fix. I added the link below so you can check it out.

http://www.strutmasters.com/lincoln-suspension-parts-s/1.htm

I hope I was of some help

Good Luck!!!

Posted on May 06, 2009

  • 1986 Answers

SOURCE: How to remove rear door panel on 2001 continental?

You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

Posted on Aug 14, 2009

  • 157 Answers

SOURCE: 1997 lincoln continental check steering assist light

Is the fluid full enough? there should be a dipstick to tell where the level should be. Also is the belt tight enough? Wires loose?

Posted on Aug 22, 2009

  • 1986 Answers

SOURCE: replace rear brake light bulb 1998 lincoln continental

pop the trunk and right behind where the lights are pull the carpet down and their will be of the following depending on the trim.

You will either see the light sockets themselves that you can twist and pull to change the bulb, or you will see the plastic nuts/screws that you can remove to remove the entire assembly in order to access the bulbs.

If it's your 3rd brake light, the screws to access the housing are located in the upper part of the trunk

Posted on Oct 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The left rear window on my 1998 Lincoln Continental is stuck down so I assume it`s the motor. How do I test it & remove the door panel and motor


There's usually a combination of screws and plastic clips holding the panel on. Just take em all off and pull the panel. Then unplug the motor. There should be two prongs on the plug on the motor side. Run jumpers from your battery and then using test wires touch both terminals with the test wires. If it doesn't work, reverse your wires..if it still doesn't work then the motor is bad

May 31, 2011 | 1998 Lincoln Continental

1 Answer

Where is the AC low pressure port located on a 1997 lincoln continental


should be passanger side there are two fittings one high side one low side they usually have a blue and a red screw on cap on them

Jun 26, 2010 | 1997 Lincoln Continental

1 Answer

Replace rear brake light bulb 1998 lincoln continental


pop the trunk and right behind where the lights are pull the carpet down and their will be of the following depending on the trim.

You will either see the light sockets themselves that you can twist and pull to change the bulb, or you will see the plastic nuts/screws that you can remove to remove the entire assembly in order to access the bulbs.

If it's your 3rd brake light, the screws to access the housing are located in the upper part of the trunk

Oct 26, 2009 | 1997 Lincoln Continental

1 Answer

1996 Lincoln Continental : Instructions given by others=dont work


The sides of the third light inside of the car have plastic revits in each side looking carefully with a bright flashlight you can see them the center of the rivit can be pushed in about an eighth Inch and the rivit can be pryed out. onece the rivets are out the whole light will come off its mount. Watch as you do this as you need to put it back.turn it over and change the bulbs. The owners manual in the maintaince section tels the way and it's called the high mount brake light

Aug 15, 2009 | 1995 Lincoln Town Car

3 Answers

Lincoln Town Car 1999 driver side window switch


The plastic piece around the switches comes off and the entire cartridge comes out. It just snaps into the armrest. My 98 continental having similar issues. All other switches work, drivers window just quit. Tried a new cartridge did not fix problem.....still working on it.

Apr 06, 2009 | 2000 Lincoln Town Car

1 Answer

How to remove rear door panel on 2001 continental?


You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

Apr 01, 2009 | 2001 Lincoln Continental

1 Answer

Rear door on driver side won't open,have taken the panel off the inside of car,seems like the lock won,t travelas far as it does on the other door.is there any way to open this door,thanks[1997 lincoln...


Rear
Removal
  1. Using a small screwdriver, remove the screw cover from the armrest of rear door trim panel (27406).
  1. Remove the two retaining screws.
  1. Using Trim Pad Removing Tool from Rotunda Windshield and Moulding/Trim Removal Kit 107-R0401 or equivalent, pry rear door trim panel from door inner panel.
  1. Disconnect electrical connectors.
Installation
  1. Position rear door trim panel on door inner panel, aligning two locators on rear door trim panel. Reverse Removal procedure.
------------------------------------------------------------------------------------ Rear
Removal
  1. Remove door trim panel and watershield. Refer to Section 01-05 .
  1. Check all connections of remote control links and cables. Service as necessary.
  1. Remove remote control assembly.
  1. Remove door latch remote control assembly from latch assembly.
  1. Drill out rivet at bellcrank and link (264B14).
  1. Remove three screws attaching latch assembly to door.
  1. Drill out rivet that attaches actuator motor to door.
  1. Remove latch assembly with actuator motor and door latch control rod lever link assembly.
Installation
  1. Install new bushings and clip onto latch assembly.
  1. Install latch with links and power lock actuator into door cavity.
  1. Position latch assembly to door, aligning screw holes in latch and door. Install three screws. Tighten to 10-13 Nm (89-115 lb-in).
  1. Attach door latch actuator motor to door with a new rivet.
  1. Install bellcrank and link to door using a new rivet.
  1. Install inside door handle and remote control assembly to door.
  1. Open and close door to check latch assembly operation.
  1. Install watershield and door trim panel. Refer to Section 01-05 .
ee8a11f.gif
Item Part Number Description 1 221A00 Door Handle to Door Latch Actuating Cable 2 26446 Rear Door Control Rod Retainer 3 377901 Plug Button 4 26412 Rear Door Latch 5 W623451-S2 Push Nut 6 224A32 Counter Balance 7 22450 Door Outside Handle Tension Spring 8 W701210-S309 Screw 9 224A20 Outside Door Handle Anti Rattle Pivot (2 Req'd) 10 22404 Door Handle 11 224A24 Front Door Outside Handle Spacer (2 Req'd) 12 264A64 Rear Door Actuating Rod 13 22408 Outside Door Handle Anti-Rattle Bumper 14 22428 Outside Door Handle Large Pad 15 N621906-S2 Nut (2 Req'd) 16 N807329 Screw (3 Req'd) 17 26595 Rear Door Electric Latch Actuator (RH) 18 W701566-S47 Rivet 19 431C04-A Rear Door Latch Striker Assembly 20 — Door Lock Striker Plate (Part of Door Shell Assy) 21 W525172-S Rivet (2 Req'd) 22 264B14 Bellcrank and Link (RH) 23 264A50 Bushing 24 N802034-SG Rivet 25 26420 Rear Door Latch Control Rod Link 26 W525172-S Rivet (2 Req'd) 27 21818 RR Door Latch (Inside) 28 A26460 RR Door Latch Push Button Rod 29 21982 Door Latch Rear Striker Assembly 30 N808377-S101 Screw (2 Req'd) 31 250A04 Rear Door Catch 32 N801010-S100 Truss Head Bolt (2 Req'd) 33 N804234-S2 Screw 34 266A74 Rear Door Latch Actuator Retainer 35 24630 Rear Door 36 26552 Rear Door Latch Control Escutcheon A — Tighten to 21-29 Nm (16-21 Lb-Ft) B — Tighten to 10-13 Nm (89-115 Lb-In) C — Tighten to 7-8 Nm (62-70 Lb-In) D — Tighten to 26-34 Nm (20-25 Lb-Ft) E — Tighten to 3-4 Nm (27-35 Lb-In)

Mar 24, 2009 | 1997 Lincoln Continental

1 Answer

How to change rear lights 2002 continental


Remove the 4 push pins in the plastic panel that covers the trunk latch striker the will be 2 on the far sides of it and 2 on the lower part of it in the center. Then pull back the carpet that covers the area behind the tail lamps and remove the nuts from the studs then remove tail lamp.

Mar 02, 2009 | 2002 Lincoln Continental

1 Answer

Where is the fuse box in the 1997 Lincoln Continental?


dash fuse panel (behind left side of dash)
power distribution box (in engine compartiment,above left wheelwell)

have a great day !!!!

Denis

Dec 12, 2008 | 1997 Lincoln Continental

Not finding what you are looking for?
1997 Lincoln Continental Logo

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

fordexpert

Level 3 Expert

5520 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...