Question about 2007 Hummer H3X

1 Answer

Heater stays on all time

Replaced battery and now heater will not turn off, all fan and selector controls appear to be working

Posted by on

  • Thomas Perkins
    Thomas Perkins Nov 28, 2012

    http://www.autozone.com/autozone/parts/D...

  • Dennis Upchurch Nov 30, 2012

    Could not find the resister on my blower, motor is working fine, thanks for the help.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Hummer Master
  • 14,384 Answers

Here's a link to the blwer motor resister,it's located next to blower motor,easy to remove.

Posted on Nov 28, 2012

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Heater fan only works high


it sounds like the heater switch itself is bad. I would change it.

Jan 27, 2014 | Pontiac Montana Cars & Trucks

1 Answer

I have a 1999 jeep Wrangler. The selector for the heater controls work when not driving, but when driving the defroster is pumping air from the outside, this is when all are off including fan. heat control...


there is a sensor on the back of the switch panel for the heater controls that is bad. my sisters jeep did the same thing last week and we replaced the sensor and fixed it

Feb 07, 2011 | Jeep TJ Cars & Trucks

2 Answers

My 2005 silverado isnt getting heat i changed the thermostat and the trucks getting up to temp the fan controls work but the temp selector doesnt are there fuses i can check or something?


i have 2005 chevy silverado 1500 z-71 have problem with cooling fans coming on when truck is cold and staying on until the battery dies. i've changed the cooling sensor and swapped relays, I've also had mechanic put scan tool on truck and said it was between computer and relays. any ideas.

Jan 17, 2011 | 2005 Chevrolet Silverado

1 Answer

Heat fan stayed on when key off, killed battery, recharged battery, tried to pull fuse for heater fan, still ran, pulled power connector to fan. When tried to reconnect this morning, fan not working....


Did you remember to replace the fuse?. So, the fan kept running even with the controls in the off position? Were there any other accessories that would run with the key turned off?

Dec 31, 2010 | GMC Yukon Cars & Trucks

1 Answer

Heater sandaly stop working , the fan it's correct and the selector switch also work fine. i check the fuse of the heater it's good . please guide me to find this issue thank you


so does the fan turn on or not and there is a blower moter resester you can check that controls the fan speed when you select on the switch its usualy mounted next to the fan.

Dec 07, 2010 | 2002 Daewoo Nubira

1 Answer

Heater/AC fan not working, resiter has been changed and switch has power


This is a common problem with this vehicle. You will need to make some tester cables with some 18 g wire or buy some they should be about 20 in or so. Expose the wire on the ends by about an in and attach some alligator clips to help that stay put and and unplug the connector that pluigs into the fan housing from under the hood. (it is nearest to the computer metal box and just above the battery. It unplugs and had two prongs almost like a house plug in. Connnect one wire you made to the neg of battery. Afix this to one post of the prong you just exposed. Do the same to the other side and you should hear the motor whirl. If it did not, reverse your wire connections and test again. If your fan does not whirl, your fan is shot. Replace with a new fan preferably one that has some kind of warranty or from a salvage yard. The reason I say this is that you can get these fans online for about 40 bucks but they wear out very quickly and draw more electric current as they wear out and burn out your resistors,relay and your selector swtich. Another thing to check and replace is that little black relay on your passenger side under your glove box area. Check your fuse too. When you put a good fuse back in, you should hear your relay click as you plug it in and pull it out. Replace this relay as this is known to cause grief too. You can remove your console panel (plastic shroud that covers your radio and heater and then remove the heater/ac module and take a look at the selector switch that makes your fan blow light or harder. This is known to burn out as well. You do not need to replace the whole module as the blower fan speed selector switch pops out. Check your wiring to see if it is melted. Most of the time, your fan gets worn out...it draws more juice and gets things hot and it can backfeed current into components and fry them. Blower switches are cheaper at Autozone so stay away from the stealership parts unless you have too. Replace that black relay while you are in there as this can partially work and cause issues as well. Good luck and let me know if you need any other info or if I helped at all.

Apr 08, 2010 | 1999 Jeep Wrangler

1 Answer

My heater control module keeps going out!


Most electrical problems are caused by bad grounds. Since your battery is grounded to your engine, make sure your engine is grounded to your chassis. I have seen battery terminals replaced and the small ground wire to the chassis was not connected back.

Jan 23, 2010 | 1991 Chevrolet Silverado 2500

1 Answer

Renault Clio Air Con Fan Problem - Wont turn off


Find Someone else,
Have Them Replace The Fan Selector Switch,
There Is Only 1 Fan In The System, Since You Can Select Between Defrost, Dash, Floor,
But Cannot Control Fan Speed/Shut-Off Fan.
I Would Replace The " Fan Selector Switch" Installed In Your Heater-A/C Controller Unit
Mounted In Your Dash.
Take Care God Bless

Jul 02, 2009 | 2000 Renault 181

1 Answer

Heater Fan does not work


Sounds like the fan control knob has shorted out. You can check the fan "blower" relay and fuse in the engine compartment but you need to make sure the control knob is good or you will keep blowing fuses and relays. If your blower fuse and relay are good, then just have the control knob checked and replaced if needed.

May 08, 2009 | 1999 Volkswagen Passat

Not finding what you are looking for?
2007 Hummer H3X Logo

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hummer Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8572 Answers

Are you a Hummer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...