Question about 2006 Chrysler PT Cruiser

Open Question

On a pt cruiser, one low beam headlight doesn't work

I changed the bulb on the low beam, it worked for a week but now it won't come on. The other side works fine.

Posted by on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
dj_relly999
  • 4070 Answers

SOURCE: have bought two new low

Hi! Before the replacement, is the low beam on the passenger side faulty? Please write back. Thank you for using FixYa!

Posted on Sep 02, 2010

Ad
e-Guru
  • 3917 Answers

SOURCE: my driver side headlight does

Hi

First check the wire that comes from the headlight switch to the headlamp bulbs for low beam and check to see if there is a short in the wire. You can find this wire by using a test light turn on the key and get a good ground with the test light, poke the wire and see if the test light illuminates with the headlight switch on. Also check out the headlight dimmer control switch.

Also check this useful link bellow:-

http://www.wikihow.com/Fix-a-Low-Beam-Head-Light

Please get back to us if you have further query else please accept the suggestion.

Thank you for contacting fixya.com

Posted on Apr 08, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Low beam light on my 2003 pt cruser diver side dont work


Simplest answer is probably a bad filament in that new bulb.

Jul 07, 2014 | 2003 Chrysler PT Cruiser

1 Answer

Mazda cx7. both high beams work and one low beam works. how can i tell if its a headlight or some other problem


Thanks for choosing FixYa and welcome. These new lights have two types lin one bulb, one for the low beam and one for the high beam. Find the bulb that isn't lighting for the low beam and replace it with a new bulb. If it doesn't work, you need to check the wiring to that specific light. Since it is only one, the new bulb should work.

Oct 01, 2011 | 2000 Mazda MPV

1 Answer

I have a 2002 Buick Rendevzeous. Sometimes the driver side low beam works, sometimes it doesn't. When it doesn't, the turn signal won't blink. It just stays dimmly lit. Right now, the low beam...


You have a bad electrical connection. Check the wiring harness and both sides of it's connectors for corrosion and or breakage. The connector terminals will become worn and corroded and the wiring sheaths a prone to weathering and become brittle. Replace or clean as needed.

Sep 04, 2011 | 2002 Buick Rendezvous

1 Answer

Hello. i have a 06 pt cruiser limited edition. my low beam light on passenger side does not operate,but the driverside low beam does.my high beam,tail lights directional signal all work. what could be the...


your headlight bulb may have a high & low beam filament in it, if so the low beam filament is blown & you will have to replace the bulb.......cheers

Aug 16, 2011 | 2006 Chrysler PT Cruiser

1 Answer

My headlights don't work, but the brights do. What caused this and how can I fix it?


Every headlamp has a bulb inside that has two filaments one for high beam and the other one for low beam, if any of those filament is cut then that beam (High or low) won't work. If your high beam work then your fuse it's ok, so you can visually inspect your headlights bulbs for broken filaments. remove bulb socket and remove the bulb carefully to inspect the filaments. if the filaments are atacched from one terminal to the other then the bulb it's ok, if not replace the bulb.

Jun 28, 2011 | 2002 Chevrolet Suburban

1 Answer

High beams work low beams do not


you don`t say if you have checked the fuses for the headlights.if the fuses are okay and you know that the low beam filaments are working.you may have to feed power and ground directly to the proper headlight prongs from the battery to make sure the bulbs are good.then it could be a relay for the low beams or a switch for the headlights.you don`t say if you have daytime running lights on this car as there is a module for this system that may be the problem for the now low beams.

Mar 28, 2011 | 2006 Chrysler PT Cruiser

1 Answer

Right side headlight (low beam) dead


clearly volts without amps. pinch wire bad socket or multifunction switch under cover on steering column.

Jan 25, 2009 | 2006 Chrysler PT Cruiser

Not finding what you are looking for?
2006 Chrysler PT Cruiser Logo

Related Topics:

222 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...