Question about Cars & Trucks

1 Answer

I have a 2007 ford explorer and the codes came back as solenoid a b and c. We had someone look at it yesterday an they said it probably is the shift intake solenoid. It doesn't accelerate like it should to 25mph but after you hit 25 and after it drives fine. Does this sound right the shift intake solenoid or could it be something else? I want to be sure before I order the part needed to replace it. Thanks!

Posted by on

Ad

1 Answer

Your not making that repair yourself

You need a shop to properly diagnose the
trans codes

They need reference material to look them up & follow
trouble charts

I doubt 3 solenoids would fail unless they are all in
one pack as some ford trans are.

Posted on Nov 28, 2012

  • 1 more comment 
  • Erika k Nov 28, 2012

    Yes they are all in one pack.

  • Anonymous Nov 28, 2012

    Okey then I have installed the pressure control & solenoid packs in my LS The list was $515 & I paid $332 wholesale as I once owned a trans shop, so I get the better price

  • Anonymous Nov 28, 2012

    That was from my former parts supplier not a dealer,they hate anyone that know anything & I have tax form in there with them for the 20% off,still nasty to you

×

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 225 Answers

SOURCE: should the shift solenoid need to be replaced at

no, only if they go bad

Posted on Aug 13, 2009

  • 127 Answers

SOURCE: loud noise when i hit bumps and turn the sterling

chances are that noise is the ball joints telling you they are dry and have no grease and they should be replaces fairly soon

Posted on Nov 04, 2009

  • 73 Answers

SOURCE: Honda Crv 2003 check engine light is on. Engine

Tell me what kind of motor oil r you using.regular or synthetic.

Posted on Jan 05, 2010

  • 4 Answers

SOURCE: 1997 transmission Slow Acceleration

not sure if this is the answer yet but i have the same problem with the same codes i work at an auto parts store and a few of the techs that are customers have lead me in the direction of changing the ignition switch, i am doing it today will let you know if it solves the problem

Posted on Jan 27, 2010

  • 1 Answer

SOURCE: Transmission Problems on 2001 Elantra

what can i do to fix the output speed sensor

Posted on Aug 05, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the location of shift solonoid on my 99 ranger


Auto Repair: Fix Transmission Shift Problem Ford 5R55E ...

? 14:25
https://www.youtube.com/watch?v=ilYmZpgfXa8
Dec 7, 2011 - Uploaded by 1A Auto Parts
It is a good transmission but is susceptible to the valve body gasket... ... This transmission was used in Ford Aerostar, Ranger, Explorer, Thunderbird, ... Ford Explorer 5R55S Transmission Solenoid Pack Replace - Duration: ...

Replacing Solenoid Pack In E4OD Transmission - YouTube

? 12:25
https://www.youtube.com/watch?v=_CnFAcVO20E
May 15, 2013 - Uploaded by CHRIS10077
I have a really hard ( Imean HARD) shift in my 96 F-250. .... if he replaced the solenoid pack it was probably do to hard shifting ortransmission .... WHITE FACE REVERSE GLOW GAUGE INSERT INSTALL 99 - 04 Mustang ...

Transmission Shift Solenoid - YouTube

? 3:46
https://www.youtube.com/watch?v=24gkmDDV0C8
Jan 26, 2008 - Uploaded by ADPTraining
Modern transmission use a specific combination of shift solenoidON ... Vehicle Speed Sensor Location - Duration: 1:12. by richpin06a 770,125 views ... How to replace shift solenoid in 1999Chevy Blazer - Fix OBD P0758 on ...


Jan 01, 2016 | Cars & Trucks

1 Answer

Hi. I have a 97 ford explorer 4.0 6 cyl,4x4. I have p0756 error code .(shift solenoid). I replase a shift solenoid but the code come on again,Afther brought a four pack solenoides and still the...


The CPU will not know what has been done to rectify a problem so it will keep showing the fault code until you reset the CPU. use a code reader and reset the CPU and see if the code come back

Dec 10, 2013 | Cars & Trucks

1 Answer

Po756 code and blincking od light 96 ford explore


P0756 FORD - Shift Solenoid 2 Performancexicon.jpghttp://engine-codes.com/p0756_ford.htmlForum CodePossible causes- Low transmission fluid level
- Dirty transmission fluid
- Faulty shift solenoid 2 valve
- Shift solenoid 2 valve harness or connectors
- Shift solenoid 2 valve circuit is open or shorted
help.png Help with thisTech notes When the a transmission solenoid is stuck off, in most cases the problem is not the electrical part of the solenoid; the problem is foreign material obstructing the mechanical function of the solenoid or the flow of the fluid through the transmission valve body. If the transmission fluid is very dirty, it is recommend changing the transmission fluid and if possible removing the transmission pan for further diagnosis. Excessive debris or metal particles on the transmission pan could be an indication that there is a transmission mechanical failure and that the transmission will need to be rebuilt or replaced.

Jul 06, 2012 | 1996 Ford Explorer

1 Answer

What needs to be done for a PO761 diagonist code reading on a 1996 ford explorer sport 4x4


That's indicative of a shift solenoid issue. The solenoid is located inside the valve body of the transmission. It'll probably need to be replaced.

Mar 26, 2010 | 1996 Ford Explorer

2 Answers

Code PO740 on my 2002 ford explorer what need to be replaced


My 2007 code book says Torque Converter Clutch Solenoid Circuit open.

Go to autozone & have them do free scan & interpret code.

Sep 22, 2009 | 2002 Ford Explorer

2 Answers

CLUNK NOISE WHEN SHIFTING IN REVERSE FORD EXPLORER 95 ELECTRIC TRANSMISSION


I would say the rear driveshaft is either in need of lubrication or replacement.

Aug 23, 2009 | 1995 Ford Explorer

2 Answers

Transmition wont shift


Sounds like a bad toque convertor or a bad front pump

May 23, 2009 | 1998 Ford Explorer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...