Question about Cars & Trucks

1 Answer

WHERE DO I FIND MY RESISTERS FOR MY HEATER BLOWER SO I CAN REPLACE THEM

ALL MY SWITCHES SEEM TO BE WORKING I KNW MY AC BOTTLE IS EMPLTY BUT I DNT HAVE BLOWERS FOR CLAERING MY WINDOWS I CHECKED THE REALAYS AND FUSES SO I THINK ITS THE RESISTER I JUST DONT KNW HOW AND WHERE TO LOCATE THEM CAN U HELP ME OUT ANYONE WHOS HAD THE SAME PROBLEM ?????? X

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 5,370 Answers

Under dash panel,or behind glove box on most of vehicles.

HEATER BLOWER MOTOR


Its faulty blower motor resistor. The low and medium speed on blower motor is controlled by resistor and its actual speed is high. So because resistor is not working, blower motors actual speed which is high is working.


It can be faulty blower motor or faulty blower motor resistor. Get the blower motor inspected. If it's faulty it has to be replaced.


=======

For blower motor testing and replacing, check the link below: ----

Blower motor Testing/replacing for all vehicles?

http://repairhelpcenter.blogspot.in/2012/02/blower-motor-replacing-for-all-vehicles.html

------------

These will help.

Thanks.

Posted on Nov 28, 2012

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 28 Answers

SOURCE: heater blower switch does not

Do you have power to the switch? Do you have power to the fuses? They may not be blown but they may also not have power. Not a likely scenario but possible. First look for power to the switch. No power trace to fuses. Next check if switch is getting power doe switch send power. Does blower motor receive power after you verified that switch has power. Is the switch from the dealer or a/m? Try these things first. If the switch is used than the switch is probably bad. Also there is a resistor on the blower motor that can go bad and that could be the problem.

Posted on Jul 29, 2008

  • 2 Answers

SOURCE: blower control switch

I had this same problem and it turned out to be a simple fix,my problem was the hot wire contact on the blower itself.Fix was cleaning the contact w/sandpaper and replacing the part on the hot wire that connects to it.

Posted on Dec 29, 2008

roy7777
  • 109 Answers

SOURCE: Heater blower won't run on heat or a/c

sounds like blower motor is junk what hapens is people take the cabin filther out and all kinds of junk falls into heater motor and eventually it gets stuck and motor will not work right

Posted on Apr 12, 2009

Molson02536
  • 3854 Answers

SOURCE: 2002 Trailblazer blower not working

The blower motor resistor card is located under the glove box. You have to take the bottom panel from underneath the glove box out(be careful not to break the wire clip that holds the wires in place on that panel). Once you take the panel loose look in the back. You will see the blower motor. Behind the blower motor is the card. You will need a 9/32 for the panel and a 7/32 for the card. It is only 4 screws total to remove and 2 wire harness clips. It is about a 15 minute job. Good luck and hope this helps.  Auto Zone has the part for around $15.00 and will have the step by step instrutions for you also if you need it free of charge. I think the dealer charges $109.00 for this repair. 

Posted on Jun 17, 2009

  • 1757 Answers

SOURCE: 2001 Dodge Grand Caravan heater blower motor not

The Blower Motor Resistor is located behind the glove box on the dash. Remove the whole glove box to access. The Resistor is mounted against/sort of into the fire wall.
1. Disconnect the negative side of battery.
2. Disconnected the Electrical Connection to the Resistor.
3. Remove the bolts/screws. I believe they have 8mm heads, there should be 2 of them.
4. Replace with new one/Replug electrical connection.
5. Reconnect the negative side last.
6. Test System before putting the glove box back in!
The Blower Motor is easy (compared to $1000) to remove and replace.

Posted on Jan 01, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Heater blowers don't work but ac does


where the wires plug into the heater box there is a resister held on by two screws replace that should help

Jan 06, 2014 | 1997 Nissan Pickup

1 Answer

My heater blowers dnt work and i need to knw where i can locate the resister blocks for my heater blowers so i can ghange them


Its located under dash,or near glove box.

The dash panel lower side has to be out.

HEATER BLOWER MOTOR


Its faulty blower motor resistor. The low and medium speed on blower motor is controlled by resistor and its actual speed is high. So because resistor is not working, blower motors actual speed which is high is working.


It can be faulty blower motor or faulty blower motor resistor. Get the blower motor inspected. If it's faulty it has to be replaced.


=======

For blower motor testing and replacing, check the link below: ----

Blower motor Testing/replacing for all vehicles?

http://repairhelpcenter.blogspot.in/2012/02/blower-motor-replacing-for-all-vehicles.html

------------

These will help.

Thanks.

Nov 28, 2012 | Cars & Trucks

1 Answer

My fan for the Ac and heater will not work. iam trying to replace the blower resister


the blower resistor is in the plenum... above the heater core.
If the blower motor does not work at all ... you may have a bad climate control switch.... or blown fuse even... as the resistor is a two stage coil... Low speed and medium speed... no resistor on High and would normally not go at the same time....

Sep 30, 2010 | 2004 GMC Envoy

2 Answers

Heater bower won't blow


There is a blower motor relay,near the motor i think,check it.

Apr 12, 2010 | 1998 Ford Contour

1 Answer

AC on Caravan


you have either a bad blower motor resister or a bad blower motor. the resister is located in the heater box close to the blower motor.

May 23, 2009 | 2003 Dodge Caravan

2 Answers

F150 2004 blower working only on high position.


this is because your blower motor resisters are burned out for speeds 1,2 & 3. High speed does not have a resister.

Replace the resister. If it goes a 2nd time, it is because your blower motor is failing & drawing too much current.

it is behind the glove box I think. It is in the plenum case where air blowing on it keeps it cool.

Easy repair. May need to access throught glove box which should open all the way down when you squeeze the sides in.

Go to tascafordparts.com for a discounted resister.
Please rate as solved problem if this is what you needed.

------------------------------------------------------------------------------
Manual Climate Control System Outputs
Blower Motor Switch Resistor
Blower Motor Resistor Coils 9ba1105.gif Blower Motor Thermal Limiter 47afe58.gif The heater blower motor switch resistor has the following features:
  • The assembly is located on the passenger side of the plenum assembly behind the glove compartment (06010).
  • Three resistance elements are mounted on the resistor board to provide four A/C blower motor speeds.
  • Depending on the heater blower motor switch position, series resistance is added or bypassed in the A/C blower motor circuit to decrease or increase A/C blower motor speed.
  • An overheating protective device (thermal limiter) will open the resistor coil circuit when the temperature reaches 121°C (250°F), interrupting the blower motor operation in all speeds except HI.
  • The thermal limiter cannot be reset and is not serviceable.

Mar 23, 2009 | 2004 Ford F150

2 Answers

1983 Chevrolet Suburban Heater fan not working


Heater blower motor resister is bad, replace, located under dash above heater motor.

Mar 15, 2009 | 1983 Chevrolet Suburban

1 Answer

AC Blower switch only runs on the high speed,


Heater blower motor resister is bad, common problem. resister controls blower motor speeds. replace resister.

Mar 01, 2009 | 1993 Jeep Grand Cherokee

1 Answer

The heater / ac blower only works on high. It is not the blower or the control switch or the blower motor relay. Please help. Thank George


It is the blower resister. I purchasted one at auto zone for $18.00. It is located under the passenger side dash. You need to remove the glove box and the plastic cover under the dash to expose the blower motor. the blower motor resister is right next to the motor. Simply unplug the resister remove the two screws and replace. I did this and now my fan works on all speeds.

Jul 20, 2008 | 2001 Oldsmobile Alero

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

271 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...