Question about Cars & Trucks

Open Question

Where is the knock sensor on 300 chryler - Cars & Trucks

Posted by on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

SOURCE: knock sensor

knock sensors are underneath the lower intake. replace the knock sensor harness as well

Posted on Oct 16, 2008

Ad
  • 36 Answers

SOURCE: 92 lexus es300 knock sensor

Need to remove the upper and lower air intake manifold.  There are two knock sensors for the front and rear pistons banks.  If you plan to do this yourself it is about 1 to 2 hours.  While you are at it, there is a short coolant bypass hose sitting in the same spot, replace it.  Another problem with the knock sensor is the wire harness used to connect the two knock sensors into one connection sometimes wears out and contacts the metal on the engine causing false signals to the ECM, so replace this cable also.
Just did this last summer on my 99 ES300.  Pretty easy.
DIYr

Posted on Mar 16, 2009

mecanica03
  • 907 Answers

SOURCE: 1999 rx 300 3.0 knock

remove intake manifold and air intake chamber completely, the knock sensors are located in middle of engine

Posted on Sep 07, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I just changed the knock sensor on my lexus rx 300 now the second and third gear dont have a smooth change also gear all of a sudden is not going into the 4th gear


Knock sensor controls ignition timing. It should have no control on transmission shifting. Did you disconnect/remove anything else to access the knock sensor? Was the battery disconnected? If so, a relearn procedure may be required for trans module etc relearn shift points while you drive the vehicle

Jul 01, 2015 | 2000 Lexus RX 300

1 Answer

My chryler 300 is stack in park it dont shif


Check shifting linkage going to transmission, May be bent of ***** out.

May 02, 2012 | 2006 Chrysler 300

2 Answers

How do I program keyless entry in a chrysler 300 touring?


i think you have to have the shops computer for them i would take it to nearest dealer it normaly cost $10.00

Nov 21, 2010 | 2005 Chrysler 300

1 Answer

1999 rx 300 3.0 knock sensor how do i replace a knock sensor?


remove intake manifold and air intake chamber completely, the knock sensors are located in middle of engine

Sep 06, 2010 | 1999 Lexus RX 300

3 Answers

Not shifting into overdrive and check engine light


I'm not a lexus guy , but I'm thinking that you have a vacuum leak somewhere.

Nov 06, 2009 | 1999 Lexus RX 300

1 Answer

2000 ES 300 won't go into overdrive. The check engine lite indicates that it's the Knock Sensors that need to be replaced which is going to be expensive. I don't want to change this then find out it's the...


Knock sensors reduce engine emissions and spark knock and has no relations to the transmission. have your transmission checked or serviced. Hopefully this helps

Aug 03, 2009 | 2000 Lexus Gs 300

1 Answer

2005 chryler 300 eng hood will not open -cable is


You can access the hood release from the front of the car under and behind the front bumper.

Jul 19, 2009 | 2005 Chrysler 300

2 Answers

92 lexus es300 knock sensor


Need to remove the upper and lower air intake manifold.  There are two knock sensors for the front and rear pistons banks.  If you plan to do this yourself it is about 1 to 2 hours.  While you are at it, there is a short coolant bypass hose sitting in the same spot, replace it.  Another problem with the knock sensor is the wire harness used to connect the two knock sensors into one connection sometimes wears out and contacts the metal on the engine causing false signals to the ECM, so replace this cable also.
Just did this last summer on my 99 ES300.  Pretty easy.
DIYr

Mar 01, 2009 | 1999 Lexus ES 300

1 Answer

Knock sensor


knock sensors are underneath the lower intake. replace the knock sensor harness as well

Oct 15, 2008 | 1992 Lexus Es 300

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...