Question about 2001 Chevrolet Cavalier

1 Answer

Where is thermostat in 2001 chevy cavalier 4cyl

I need to find my thermostat. a picture with an arrow would be nice.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Greenhorn:

    A rookie expert who has answered 20 questions on their first day.

  • Expert
  • 129 Answers

Pretty sure its in between firewall and engine theres a silver pipe under exhaust manifold serp belt side is water pump ,drivers side is t stat housing,u gotta remove exhaust manifold and that crossover pipe its a fun one... cant find a good picture sorry

Posted on Nov 28, 2012

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

carfreak1217
  • 109 Answers

SOURCE: 2001 chevy cavalier turn signal relay location

Above the brake pedalc956ca0.gif

Posted on Jun 27, 2009

  • 3 Answers

SOURCE: How do you change the headlight for a 2001 chevy cavalier

i actually just did this a couple days ago, this takes about 20 minutes and a little bit of patience. When you pop your hood you will see a protective piece of plastic over the headlights/radiator, you firstly have to remove the plastic clips holding that piece then pull that piece of plastic off, once done u will see 2 bolts holding each headlight in place, i believe it is a 9/16 socket but if not just find the one that fits, remove the 4 bolts (2 for each headlight) and pull the headlight in an up and outwards manor. if you feel any resistance do not yank look at why it is catching and clear it, then it should just pop out (the headlight and the corner piece and clipped together so dont pull it too far out) then when the bulb is accessible pull the old bulb, put the new bulb in and voila place the headlight back into position, redo the 4 bolts holding the headlights and re-attach the plastic headlight/radiator cover. Enjoy the new lights

Posted on Dec 24, 2008

motor1258
  • 6674 Answers

SOURCE: 2001 chevy cavalier door contact switch install

If no screws or nuts holding it that you can see from outside, then just use a screwdriver or something and pry at the base where it is against metal.

Posted on Jan 04, 2009

  • 2309 Answers

SOURCE: replace fuel pump in 2001 Chevy Cavalier

remove the gas tank, undo the ring that holds the sending unit , replace fule pump and new sock filter, reinstall

Posted on Nov 20, 2009

  • 468 Answers

SOURCE: replace fuel pump on a 2001 chevy cavalier

First, if your car still runs, pull the fuel pump relay, and start your car, letting it run until it dies. This will depressurize the fuel system. Then you must support the fuel tank, and take loose the straps that hold it up. Slowly lower the tank until you can unhook the tank filler hose and overflow hose by taking the clamps off and sliding the hoses off. lower it some more, and unhook the fuel lines; they require you to insert a special tool around the edge of the connection, however this can be improvised with screwdrivers or a piece of plastic or metal bent into a C shape. Next unhook the wire connection. Once you get it down, it's easiest to empty as much fuel as you can; as this will help you get it back into place. The fuel pump is inside the tank, which locks into place with a 1/8th turn. You will need a hammer and a brass punch for this job, as it needs to be tapped around to unlock. It will then lift out. Compare the two pump assemblies. The inside parts can be slightly different, but ensure that the fuel lines are IDENTICAL and the wire connection is IDENTICAL. The new one will come with a new silicone seal. Ensure that you don't put the new one in in such a way as the float doesn't bind, otherwise you'll be doing this procedure again if you don't like guessing how much gas you have. This can be a challenge to wrestle with putting the new one in, as you have to push it down to compress the new seal, and turn it to lock it. Once you get it started, you can let up and use the hammer and punch again to tighten it the rest of the way. Next, put it back together just as you took it apart, and don't forget to hook up the wires, hoses, and fuel lines. No tools required for the fuel lines, they just snap together. Once everything's tight and hooked up, put gas back in it, and if you haven't already, put the fuel pump relay back in. This you can do as soon as the car dies, and is completely optional if the car won't run at all. You are now ready to start it up, but turn the ignition on to the run position, wait a few seconds for the pump to pressurize, and then start it. Have fun, and feel free to ask any questions should you have any.

Posted on Feb 22, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2001 chevy cavalier coolant doesnt cycle through


if your car gets Hot Then maybe your Thermostat is stuck closed. check it

Dec 06, 2010 | 2001 Chevrolet Cavalier

1 Answer

I need the engine wiring diagram for chevi


1996 Chevrolet Cavalier 2.2L SFI OHV 4cyl

This is a sample for an 1996 2.2L (VIN 4) engine schematic...
4773406.jpg

You can find more details and the Repair Guide about your model in autozone.com (free register). Select the Year, Make, Model and Engine for access.

I hope help you with this (remember rated this help) Good luck.

Oct 14, 2009 | 1996 Chevrolet Cavalier

1 Answer

Crankshaft position sensor location


1990 Chevrolet Cavalier 2.2L TBI 4cyl
The Crankshaft Position Sensor is located under hood, center, rear engine area, below ingnition coil pack and DIS module, mounted in engine block.

87c675c.jpg

Fig. 1: View of the CKP sensor-to-crankshaft reluctor relationship

Crankshaft Position (CKP) Sensor
A magnetic crankshaft sensor (Hall Effect switch) is used which is remotely mounted on the opposite side of the engine from the DIS/IC module. The sensor protrudes in to the engine block, within about 0.050 in. (1.27mm) of the crankshaft reluctor.

I really hope help you wuth this (rated this help). have a nice day, good luck.

Sep 25, 2009 | 1990 Chevrolet Cavalier

1 Answer

Cant find my crank position sensor on 97 chevy cavalier z24


On 2.2L 4CYL VIN[4] It's located on rear side of cylinder block below coil module.
On 2.4L 4CYL VIN[T] It's located on front side of cylinder block almost dead center.

Apr 13, 2009 | 1997 Chevrolet Cavalier

1 Answer

Need to loosen the tensioner on a 2001 cavalier


try www.autozone.com to see if they have your car listed for diagrams pictures and step by step instructions if your car is not listed then try your local library they have all the car manuals and even copy them for you

Mar 21, 2009 | 2001 Chevrolet Cavalier

2 Answers

1999 Chevy Cavalier Water Pump


Okay,

What size engine is that cavailer equiped with?

The 2.2L 4cyl or the 2.4L (DOHC) 4cyl?

Sep 11, 2008 | 1999 Chevrolet Cavalier

Not finding what you are looking for?
2001 Chevrolet Cavalier Logo

Related Topics:

145 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...