Question about Cars & Trucks
Clutch adjustment. spigot bearing binding and on the way out, syncrs in gearbux a bit lazy. For the latter I have drained some oil out and topped up abour 1/2 ltr of autotrans oil. works a treat on syncro's. Sometimes
Posted on Nov 28, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Your link broke off. What might have happened is the car got stuck in 1st, and when you shifted to second, the link broke. Not too clued up on your car, but you probably need to drop the gearbox. On some cars you can take out the shifter without having to drop the box and still see if the link is broken. Good luck
Posted on Mar 18, 2009
SOURCE: boxer van gear select problem
need to feel it ,could be clutch ,if it goes in without the running then its the clutch.But i think your problem is more like the linkage and if its a builders van,then you could have rubble dropped down inside the gearchange boot.???Boxer isnt the gearchange on the dash on this model??if so then the problem could be the linkage cable ,--they get a bit rusty and sticky and you can only buy a complete pair as one unit .Try oiling with a proper oil can and some engine oil ,and not that obnoxous fish oil wd stuff
Posted on Oct 30, 2009
you surprise me,these vehicles are bullet proof under normal circumstances and yes the syncros can wear out like any make of vehicle ,but this old grandad who passed his test in a viva with no syncro on first gear ,and passed his hgv on a vehicle with no syncros at all was taught to drive in a different era and rule one was neutral and handbrake on when stopped ,not holding it on a hill by slipping the clutch ,secondly to not put a vehicle in first gear whilst moving ,well it wouldnt go anyway ,double the clutch between gears so as to reduce the wear on the syncros and gears .not to ride the clutch between changing gears and also change down using double the clutch to save the brakes and stop vehicle slipping or skidding on a wet road ,not fly up to a roundabout ,slam on brakes force it into first gear at 30 mph then try to imitate evil kenival by going around on two wheels .This sort of driving will only damage the gearbox like syncros and clutches not lasting very long .
Posted on Jul 03, 2010
Tips for a great answer:
Dec 07, 2014 | 2005 Ford E-250 Van
Oct 30, 2013 | Dodge Ram 3500 Cars & Trucks
shifter needs to be inspected. The shifter assembly is got misaligned, it has
to be open and realign.
are many other possibilities. But if it was working right up till now and
suddenly this occurred then its shifter
assembly alignment issue.
i suggest you to refer these gear shift issues, which are mostly noticed. These
are direct links with appropriate solutions to
the specific problems of gear ****.
GEAR SHIFT ISSUES
Car is stuck in park and the shift will not move?
These details will help.
Nov 28, 2012 | Cars & Trucks
Jun 05, 2012 | Chevrolet Express Cars & Trucks
May 16, 2012 | 1997 Saturn SC
Mar 29, 2010 | 1996 Jeep Grand Cherokee
Mar 06, 2010 | 1998 Dodge Grand Caravan
Sep 09, 2009 | 2005 Peugeot 405
Aug 09, 2009 | 1992 Chevrolet C1500
Jan 02, 2009 | 1987 Chevrolet G20
126 people viewed this question
Usually answered in minutes!