Question about Toyota Cars & Trucks

Open Question

2010 Prius noise while turning left

Rubbing sound when making left turns. Wheel bearings have been replaced

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emissionwiz
  • 75817 Answers

SOURCE: noise in front end, sounds

You say the rear wheel axles and bearings have been replaced, you mention nothing of the front wheels, you have the symptoms of a front wheel bearing being worn out, remove them and check for pitting in the bearing rollers or the bearing races, I am sure you will find a problem. Hope this helps solve your issue with the bearing noise.

Posted on Jul 28, 2008

  • 375 Answers

SOURCE: Grinding noise in the left

grinding on front wheel is caused by 2 things. a bad or loose wheel bearing,or worn out brakes, have them both checked
You might also want to check the level of fluid in the power steering reservoir - low or lack of fluid will also cause a noise (although more of a whining than a grinding).

Posted on Jul 29, 2008

66 chrgr
  • 1011 Answers

SOURCE: steering creeks when turning left or right. front wheel noise.

humming noise is bearing.creaking is either tie rod or other ball joint.tie rods on these go out all the time.bearing also

Posted on Jan 25, 2009

  • 40 Answers

SOURCE: Noise coming from front of car

It sounds exactly like a wheel bearing problem.The right side its seems would be the problem. When you turn right it puts more pressure on the bad bearing making it louder. I would suggest replacing both. If on is gone the other one isn't far off. Hope this helps

Posted on Mar 05, 2009

localwonder
  • 6784 Answers

SOURCE: rubbing or grinding noise in steering wheel

Hi, this could be a combination of many issues. i would check the following.

Check the strut mounts. there could be some damage here concerning the mounts. i would also check the control arm bushings as well. check for damage here. I would also inspect the CCV half Shaft as well. this is a known problem spot(re manufactured)CCT.

The last problem spot here will be the actual wheel bearings in the front. they may be worn or dry. this could cause the symptoms you stated as well.

you will find the issue in one or all of the above problem spots stated.

Please rate and god bless:)

Posted on Apr 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have a metal grinding noise when turning left only.


Replace the right side wheel bearing. But before you replace it. Listen to see if the noise is coming from the front or back. If you can't tell, Put some one in the back seat. Front bearings usually make noise. rear bearings, the noise can come and go.

Jun 26, 2015 | 2011 Jeep Patriot Latitude

4 Answers

What could be the problem with my car when there is a grinding noise as I turn my steering wheel to the left while driving


Brahe shoes wore and metal to metal rubbing, check wheel bearings, I would think you have the right size tires and are not rubbing.

Feb 11, 2015 | 2004 Chrysler PT Cruiser

1 Answer

When I turn my car to the left, it makes a rubbing/ grinding noise.


Check the brake pads by turning the wheel fully to the left and looking at the disc if it is scored you need new pads. Also Jack the car on the left front so the wheel is off the ground and try to rock it side to side if it moves and there is a clicking sound it could be the wheel bearings.

May 26, 2014 | 1993 Oldsmobile Cutlass Supreme

1 Answer

2005 Ford Explorer is making a grinding noise


I had some issues with my 2005 explorer left rear. It was making a creepy old door sound at low speeds and then a high pitched whisel at high speeds. That turned out to be a broken wheel bearing and had it replaced. Note each wheel has two wheel bearings. After that a new noise developed that sounded like metal scraping/ grinding metal. It end up being the brake dust cover got bent when they replaced the bearing and it was rubbing something, the fix for that was bending it so it didn't rub. I hope this helps.

Sep 03, 2012 | 2005 Ford Explorer

2 Answers

Gear noise left front 2008 prius sound like a tire rubbing against a plastic fender but it is not and the faster you go the louder it gets . Even worse when you steer to the right. And quite to the left.


It's most likely a bad left front wheel bearing or possible tire noise, switch the left front tire with the rear tire and see if the noise changes. If not have the wheel bearing checked, it may need to be replaced.

Oct 02, 2011 | 2008 Toyota Prius

2 Answers

Protege5 maual trans makes a rubbing thumping kind of sound when you coast with the car in gear when you put clutch in it stops also makes noise when you turn a little left makes no noise though when you...


Does it make this noise every time you push in on the clutch, or just when coasting?
If it always makes noise when you push in the clutch, it could be the throw out bearing.
But if only coasting and not when turning left a little, then a front wheel bearing is more likely.
The brake will also wear faster, get hotter, feel a little spongy at first hit, and the brake pedal will vibrate if the wheel bearing is going. But if it is a wheel bearing, you can wait until it is worse.

Jun 25, 2011 | 2003 Mazda Protege

1 Answer

WHEN I TURN WHEEL TO THE LEFT IT MAKES A GRATING SOUND


Sounds like it might be a front left wheel bearing.Check to see that nothing is binding against the steering mechanism first by turning the wheel hard left,block the car,remove the wheel and check for any rubbing.Check the wheel well at this time as well.If the noise got louder over a period of time then it is most likely a wheel bearing or bad CV shaft(if so equiped).Good Luck

Oct 30, 2010 | 2005 Jaguar X-Type

1 Answer

Very loud "rubbing " sound when driving only


you did damage to the wheel bearing i bet it sounds like a airplane sound. also if you steering wheel is off 7"then have front end aligned because this will destroy the tires and they will make noise.

Mar 29, 2009 | 2006 Dodge Stratus

1 Answer

Noise coming from front of car


It sounds exactly like a wheel bearing problem.The right side its seems would be the problem. When you turn right it puts more pressure on the bad bearing making it louder. I would suggest replacing both. If on is gone the other one isn't far off. Hope this helps

Mar 05, 2009 | 2008 Hyundai Elantra

1 Answer

Front-end noise


If the noise is coming from the right front when making a left turn it would be a wheel bearing if you can narrow down where the sound is coming from i would check that.

Feb 25, 2009 | 2001 Jeep Cherokee

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

437 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...