Question about Lexus ES 300

1 Answer

Replacing 1995 lexus ES300 alternator fuse

HOW DO YOU REMOVE\ REPLACE THE 100 AMP FUSE FOR THE ALTERNATOR ON A LEXUS ES300??

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 318 Answers

Two 8mm bolts secure this fuse to fuse box. They are accessed from under the fuse bx which will require removing the box itselt from location near battery and inverting to undo.

Posted on Nov 28, 2012

  • Ted Kiser
    Ted Kiser Nov 26, 2013

    As i pull this box up, is there enough slack in the wires under the box to turn it over?

×

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: can't find the thermostat

the thermostat is located on the drivers side above the starter at the end of the bottom radiator hose on the side of the engine block. i had a hard time getting info also and finally five minutes ago just got mine off. hope this will be of some help to you. now i have to go put on the new one. good luck!!

Posted on May 09, 2009

  • 4 Answers

SOURCE: HID low beam headlight replacement for 2003 lexus es300

The HID bulbs are very easy to change, and can be bought online for much less than from the dealer. Check sites like xenondepot and Ebay for Phillips D2R (for reflector headlamps) HID bulbs and you can replace them yourself.

Posted on Jun 06, 2009

  • 18 Answers

SOURCE: Radio removal 200 Lexus ES300

First you need to remove th wooden bezel surrounding the shifter. Do this by gently prying up the bottom part of the wood closest to the cup holders in the armrest using a small screwdriver. Then work out te top part gently. Rotate/angle the wood bezel to get it over the shifter. It will slide past, just work it around the button. Once this is removed then you need to remove the ashtray below the climate control. Now that the shifter bezel has been removed locate the 2 screws securing the bottom of the ashtray housing and remove them. The ashtray then will only be held in be retaining clips at the top. Once the screws are removed you'll want to have the ashtray open to get better leverage on it to pull. Gently slide the ashtray out. Be careful not to pull to hard on the actual tray of the ashtray. there is a plastic tab in the back of the ashtray that can't be seen that prevents it from coming out all the way that can easily be broken. If you do break it the ashtray is still secured to the swing mechanism by 2 screws in the bottom of the tray that will still allow it to be functional and secure, so don't worry. After the ashtray is removed the next step is to remove the small trim piece directly underneath the climate controls. On 2000 and 2001 models this will be made of wood. 97-99 models it will be black plastic. Using a small flathead screwdriver gently pry the strip of wood or plastic out. Starting in the middle of the strip is best, the retaining clips are on the right and left of the strip. It should pop out fairly easily.This will expose the screws holding in the bottom of the climate control which will need to be removed. Once the climate controls are removed the bottom radio screws should be visible. Next for the screws retaining the top of the radio you'll need to remove the clock/airvents located above the radio. Remove this with a small flathead screwdriver using the pop out method. Once removed this will expose the screws retaining the top fo the radio. Remove these screws and the screws at the bottom and the radio should slide out. Again, this will work on all models from 97-2001.

Posted on Jul 22, 2009

  • 185 Answers

SOURCE: remove rear seat lexus es300 2008

the bottom of the rear seat pulls straight up at the front and out. its pretty tight, you need to pull very firmly.

Posted on Oct 20, 2009

techbuster
  • 5081 Answers

SOURCE: need to replace thermostat but not sure where it

Follow the lower hose up to the water pump where there is a housing for the thermostat. To remove this you will first, want to take the front right tire off then the dust guard for it; the thermostat housing should now be viseable. Then you will want to take the plastic windshield washer, and engine coolant reserviors off to make the job easier. Next take the bottom rad. hose off the water pump(where it goes to, from the radiator). then struggle for awhile with taking the three nuts that hold the thermostat housing together (a wobbler bit on a socket wrench can make this job easier). Once these are off you can unplug electric plug on top of the housing, pull that part of the housing off and there the thermostat sits in all of its evasive gloriousness waitng for you .

Posted on Nov 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I fix code 13 engine speed sensor Above 1000 rpm


Clearing the codes is simple that is done by removing the fuse of the EFI from junction box 2 for 10 seconds. Make sure to remove the jumper wire and switch the key off before clearing the codes.

Here are some common Lexus vehicles 1990-1995 codes:

Code 12 and Code 13 Rpm signal circuit fault
Code 14 Igniter signal circuit fault
Code 16 ECT control signal fault
Code 21 and Code 28 Main oxygen sensor fault (for ES300; SC300 & GS300 models)
Code 22 Coolant temperature circuit fault
Code 24 Intake temperature sensor circuit fault
Code 25 and Code 26 Air fuel ratio fault (for ES300 & SC300 models)
Code 27 Sub-oxygen sensor circuit fault (for ES300 CA & GS300 models)
Code 31 Low airflow meter voltage (for ES300 and GS300 models)
Code 32 High airflow meter voltage (for ES300 model)
Code 35 Barometric pressure sensor circuit fault (for GS300 & SC300 models)
Code 41 and Code 47 Throttle position sensor circuit fault
Code 42 Vehicle speed sensor circuit fault
Code 43 Starter signal
Code 51 Switch condition signal fault (for ES300; GS300 & SC300 models)
Code 52 Code 52 and Code 55 Knock sensor circuit fault
Code 71 EGR system circuit fault (for ES300; GS300 & SC300 models)
Code 78 Fuel pump control circuit fault (for GS300 & SC300 models)

Nov 18, 2014 | 1990 Lexus LS 400

1 Answer

1993 Lexus ES300 - Gauge cluster and climate control is not working - lights and dials are all non-functional (except clock and turn indicators). Alternator and battery check out fine. I replaced the 100...


IF a 10 amp blows you have a head short past the fuse . If it takes some time to blow the short may be at 9.5 amps on an intermittent basis or an occasion that the bare wire touches earth. Look at all the wires and harness and look for burn spots or places where the wires are pinched. Look for wire fault on the shifter area as it is most likely being pinched on the shifter movement.

Aug 03, 2013 | 1993 Lexus Es 300

1 Answer

Hqw do I remove\ replace a1995 lexus ES300 alternator fuse ?


Two locations for fuses. 1 under the bonnet near the battery. 2 in the dash above the bonnet release. All are clearly marked

Nov 28, 2012 | 1995 Lexus ES 300

1 Answer

How to replace alternator fuse on 2000 lexus es300


In most car models I have had to remove the fuse box retaining bolts and lift the fuse box up and go under the fuse and remove 2 small bolts that retain the heavy alternator fuse in place, it is the only fuse that is bolted in to the box from under the box. Always disconnect the battery negative cable before you start work.

Sep 04, 2012 | 2000 Lexus ES 300

1 Answer

1995 lexus es300 fuse box diagram


On this website, you find fuse box diagram and description for Lexus ES300 (1994 - 1995)

Lexus ES300 1994 1995 fuse box diagram Auto Genius

Jan 12, 2012 | 1995 Lexus ES 300

1 Answer

1994 lexus es 300 fuse box diagram


On this website, you find fuse box diagram and description Lexus ES300 (1994 - 1995)

Lexus ES300 1994 1995 fuse box diagram Auto Genius

May 16, 2011 | Lexus ES 300 Cars & Trucks

1 Answer

Looking for the Fuse Box Diagram for a 1995 Lexus ES300


All fuses are good , alternator & battery are in great condition , somehow battery is failing to charge & nothing is working on dashbord all lights out & gauges are not working .

Feb 01, 2010 | 1995 Lexus ES 300

1 Answer

How do I change the headlampo on a 1995 lexus es300


I was able to release the headlamp bulb on the 1995 Lexus es300 by removing the rubber cover and releasing a pin that keep the bulb in place. I willhave to purchase a HELO replacement bulb, part number
SKU: HEL.1637160.11701

Oct 08, 2009 | 1995 Lexus ES 300

1 Answer

Battery not charging - Lexus ES300


your problem is the main fuse is blown under hood. it will be like a 100 or 120 amp fuse bolted in from sides of fuse/relay box.

May 20, 2009 | 1998 Lexus ES 300

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

830 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexus Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

881 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...