Question about Cars & Trucks

Open Question

Aj wholesale distributors trailer light combo kit 25ft trailer wire harness chil0114

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 15 Answers

SOURCE: Where do i plug in my trailer wiring harness??

The socket should be beside the tow hitch. If not you will need to connect a socket and patch it into the wiring of the rear lights. Here is the wiring diagram http://www.western-towing.co.uk/acatalog/Trailer_wiring.gif

Posted on Feb 10, 2009

  • 32 Answers

SOURCE: 2005 trailblazer trailer light connection

Should be in the front under the hood in the main fuse box on the left side of vehicle . look for the aux fuses for the traler plug.

Posted on Mar 25, 2009

  • 50 Answers

SOURCE: need wire diagram to hook up trailer lights, truck not factory equipped w/harness,

I'm assuming you're just going to splice into the tail light wiring so that's what these wire colors are:
at the tail lamp 3 way connector:
black and yellow = park lamp
dark green and brown = left turn signal
there should be another connector with violet and black wire for reverse lights.
the stop lights are turned on through the turn signal circuits.

Posted on Apr 12, 2009

  • 580 Answers

SOURCE: trailer wiring harness diagrams W/o internet goose chase

Try this Link www.dodgeram.org/tech/mods/electric/trailer_wire.htm

Posted on Jul 10, 2009

  • 1 Answer

SOURCE: Trailer wiring

you have to purchase a converter box with 5 wires, red, yellow, green and brown. this is because your turn signal is seperate from you parking and brake light bulb. you have to wire it straight in behind the connector.your basically converting two wires ( brakes and parking) to one wire (tailights) 5 wire to 4 wire.

Posted on Feb 04, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is there a wiring diagram to fit a towbar wiring / trailer lights to my 2013 Hyundai ix35


if you have the proper kit , the it is a simple matter of pulling the harness connector from a tail light assemble and inserting the harness on to the assembly the fitting the harness back on to it
the wires are color coded and all new trailer plug connections have the pin numbers for the color wire to get the correct lights working at the back
if you are not power or circuit savvy then get the towbar shop to wire it up or get an auto electrician to do the job

Jun 28, 2016 | Hyundai Cars & Trucks

1 Answer

How do you hook up trailer lights so i can pull a trailer


If you bought the Honda hitch kit, a wiring harness and instructions are included. If you bought a different kit, buy the wiring harness from Honda. The harness connects to a plug located in one of the accesses panels in the back. You will have to take off the. Bumper facia to route the harness to the hitch. Be sure to use the rubber grommets to prevent the sheet metal of the rear quarter panel from wearing through the wire insulation and causing a blown fuse.

Aug 07, 2011 | 1997 Honda Passport

1 Answer

Is there an easy way to get wiring for a trailer on a 2010 Ford Escape?


Your local auto parts store should have a wiring harness that will clip in to your existing harness. Modern vehicles mostly have a harness coupler under the back of the vehicle you can unplug and plug in the trailer harness without having to cut anything, making the installation very quick and painless. The harness plug may have a plastic lock which you will need to release to separate the two sides of the harness. I recommend putting dielectric grease in both sides of the trailer harness to prevent corrosion from knocking out your trailer lights. The trailer harness kit will have instructions and a diagram to guide you.
Hope this helps and please rate my solution!!

Nov 25, 2010 | Ford Escape Cars & Trucks

1 Answer

I wired up a 4 pole trailer wiring harness up and went by instructions. i wired both turn signals up white to ground and tail light to tail light but i have no brake light wire on the harness so my brake...


You need to purchase the trailer wire kit that has a solid state module that will allow the lights operate correctly. It plugs right in the factory socket, no cutting of wires are needed, and it costs around 40 dollars. It is the only way to go for your vehicle.

Sep 18, 2010 | 1997 Jeep Grand Cherokee

1 Answer

How to wire trailer lights to a toyota tacoma


The easiest way is to get the kit that plugs into the taillight harness to adapt your plug. If one isn't easily available then you can use scotch locks to splice into your trucks harness. Use a test light to make sure you locate the right wires in your trucks harness and go by the wire diagram on the instructions from the plug to hook it up.
I hope this helps!

Jul 22, 2010 | 2002 Toyota Tacoma

1 Answer

Does anybody know how to wire a towbar wiring unit to a ford escort 1999?


Wiring the vehicle for towing is fairly easy. There are a number of good wiring kits available and these should be used, rather than trying to design your own.

All trailers will need brake lights and turn signals as well as tail lights and side marker lights. Most areas require extra marker lights for overwide trailers. Also, most areas have recently required back-up lights for trailers, and most trailer manufacturers have been building trailers with back-up lights for several years.

Additionally, some Class I, most Class II and just about all Class III and IV trailers will have electric brakes. Add to this number an accessories wire, to operate trailer internal equipment or to charge the trailer's battery, and you can have as many as seven wires in the harness.

Determine the equipment on your trailer and buy the wiring kit necessary. The kit will contain all the wires needed, plus a plug adapter set which includes the female plug, mounted on the bumper or hitch, and the male plug, wired into, or plugged into the trailer harness.

When installing the kit, follow the manufacturer's instructions. The color coding of the wires is usually standard throughout the industry. One point to note: some domestic vehicles, and most imported vehicles, have separate turn signals. On most domestic vehicles, the brake lights and rear turn signals operate with the same bulb. For those vehicles without separate turn signals, you can purchase an isolation unit so that the brake lights won't blink whenever the turn signals are operated.
One, final point, the best kits are those with a spring loaded cover on the vehicle mounted socket. This cover prevents dirt and moisture from corroding the terminals. Never let the vehicle socket hang loosely; always mount it securely to the bumper or hitch.

You can check HERE details about this part for Escort and any "graphics".

Hope help.

May 21, 2010 | 1999 Ford Escort

1 Answer

Where do I find the wires to attach a trailer light kit in my 1994 GMC Jimmy


Your going to have to remove the tail light assembly to get to the running and brake lights wire harness and just tap in to the wires for the trailer light kit. Good luck and hope this helps. 

Sep 16, 2009 | 1994 GMC Jimmy

1 Answer

Trying to hook up trailer lights


taillights on what? Everything - needs to be grounded is the FIRST thing to remember. Try etrailers.com for parts or tech assistance or Google "Hoppy" trailer light kits.
Good luck

Jun 14, 2009 | 1992 Mazda B-Series

1 Answer

Installing a 7-pin trailer towing recptical on a 1991 Ford F150.


I believe you can look up the manufacturer of the trailer plug kit and find the wiring diagram there. On alot of the trailer plug kits, they have pics and diagrams in the package. The 7 pin plug (truck side) is available with the pig tail set up that plugs directly into the wiring harness for the lights. Then all you would have to worry about is the 2 wires for the electric brakes.

Nov 29, 2008 | 1991 Ford F150

1 Answer

Trailer wiring


Make sure you have a good trailer to truck ground. Check the white wire on the trailer harness and make sure you have a good clean contact at the trailer ball. This is a ground source between the two.

Jun 29, 2008 | 1991 Ford F150

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...