Question about 2006 Toyota Avalon Limited

Open Question

Toyota heated seat light won't turn off

Seat heat is turned off but light stays on continuously

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
Murphybanton
  • 2004 Answers

SOURCE: heat blowing in back under the seat but no heat in the front

Except your engine does not carry a factory fitted AC.

The hose that connects to the dash board should be re-aligned.

That should fix it.

Posted on Mar 17, 2009

Ad
  • 35 Answers

SOURCE: turn signal is staying on continuously and brake light goes off

check the bulbs or the sockets for damage
or the wrong bulb
you are getting feedback through the wiring
and that lights up the dash

Posted on Jan 10, 2010

Testimonial: "Changed bulb and bought new back tail light but turn signal stays on all time, will blink when turn blinker on. brake light goes off when push on brak"

  • 18 Answers

SOURCE: my 1998 toyota camry heating doesn't work, a/c is ok

Sounds like your heater core went out or is plugged, try doing a coolent flush on your system and if that dont work then youll propably have to replace the heater core. Hope this helps

Posted on Feb 27, 2010

alicantecoli
  • 22219 Answers

SOURCE: My 2002 Toyota Camry won't

did you use professional quality jump leads and not them cheap made in china junk ones for the local chinese shop??

Posted on Jun 27, 2011

rickyrt441
  • 4399 Answers

SOURCE: 1994 toyota corolla brake lights won't turn off

Thanks for choosing FixYa and welcome. You need to check the brake switch. Your brake pedal contacts the brake switch when it is pressed down. There is a small button on the brake switch that activates the lights. It may be stuck or broke. Try to loosen the button first. If it won't, buy another one. They only cost a few dollars.

Posted on Sep 07, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 f250 heated seat lights stay on all the time?


It is likely that the heating grid in the seat is defective.

Oct 13, 2016 | 2004 Ford F-250 Super Duty

1 Answer

2010 Lincoln MKS Heated Seat on driver's side stopped working (Light in button turns off on its' own)


The most common cause of this problem is that the drivers seat heater grid is open or burned out. That is based on 25 years as a Ford dealer technician.

Feb 27, 2017 | Lincoln Cars & Trucks

1 Answer

Toyota 4 Runner park lights won't turn off


faulty connection ,or check all your fuses from box,check fog lights fuse 1st,

Oct 29, 2012 | Toyota Cars & Trucks

1 Answer

2002 Trailblazer heated seats won't work


First check circuit breaker #8 and fuse #19 in the rear fuse panel. If these are OK, you will have to troubleshoot the seat heaters themselves (loose connector, broken wires, defective heater coil, etc.)

Oct 13, 2012 | 2002 Chevrolet TrailBlazer

1 Answer

Heated seats won't turn on


the heat element in the seat might be worn out

Feb 17, 2012 | 2003 GMC Yukon Denali

1 Answer

Where is the fuse for the heated seats in a 2007 jeep grand cherokee laredo?


Remove the ignition key. Unplug the HSM (heated seat module). It is under the passenger seat. You can easily accomplish this with the seat all the way back. Wait a few seconds they plug it back in. Start the engine. Turn the seats on. If the indicator lights come on for 2 seconds and then go out, further diagnostics is required. Hopefully they'll stay on and the seats will be working fine.

Thanks,
Ron

Feb 12, 2012 | Jeep Grand Cherokee Cars & Trucks

1 Answer

I'm not sure how to turn heated seats on in my 2002 gmc envoy.... do i even have heated seats.


If your vehicle is equipped with heated seat, there should be a control button on the door where the window buttons are.

Oct 28, 2011 | 2003 GMC Envoy

1 Answer

The driver's side heated seat won't turn off on my 2003 Mecury Moutaineer. Also, how do I change my cabin filter?


Your vhicle build date is on a blue sticker on the driver door or door frame. If not there, check other doors.
The heated seat Module is under the seat. You can unplug the connector on it or the heated seat switch to shut it off. I supect the module is bad. get one used from car-parts.com. The cabin air filter is under the leaf screen at the base of the windshield. Remove wiper arms and leaf screen for access. Please rate, thanks. Principles of Operation - Heated Seats - Vehicles Built 03/2002 Onward
NOTE: Two heated seat modules are used, one for vehicles built up to 03/2002 and one for vehicles built 03/2002 onward. The modules are not interchangeable.
The driver and passenger heated seats share a common battery and ignition feed. A shared ground source supplies the heated seat control switches. When the heated seat control switch is pressed with the ignition switch in RUN or START, a momentary ground signal is sent to the heated seat module. The heated seat module then supplies power to the heating element circuit. The cushion element and seat backrest element are wired in series and powered by the same output. The heated seat module also will ground the separate indicator circuit at the dual automatic temperature control (DATC) module display panel to indicate an ON state. The heated seat module will remain on until the heated seat control switch is pressed and a momentary voltage signal is received, or until 10 minutes expire. If the ignition source is removed from the module, the heated seat module will enter an OFF state and will not return to ON until the switch is once again pressed with the ignition switch in RUN. The heated seat module is designed to heat the seat to 37.5?C (99.5?F) and maintain the temperature until time-out or switched off. This temperature is maintained by the heated seat module monitoring the temperature sensor located in the seat cushion element, and adjusting the current flow to the heating elements.
--------------------------------------------------------------------------------------------------------------------------------

May 22, 2011 | 2003 Mercury Mountaineer

2 Answers

Heated seats in 2007 Lincoln MKX not working. I puch the button to turn them on and they light up for a second then go off. What would be the cause and solution. If it was a major problem would effect...


Help anybody?
I have a 2010 Lincoln MKX with heated and cooled front seats. However, when I try to turn them on (85% of the time) they don't work. Primarily when it's cold the heated seats won't stay on... The light turns on for a fast count of 1-5 and then turns off. This has happened since the car was new and I've had it into the dealer 4 times to have it fixed (with no resolve). In their defense they suggest it's fixed each time because they test the heated seats when the vehicle is warm in the shop. Unfortunately, this is nearly the only time it stays on.
I would love to recommend a suggested fix to the dealer as they don't seem to be able to repair it... Any ideas???

Mar 14, 2011 | 2007 Lincoln MKX AWD

Not finding what you are looking for?
2006 Toyota Avalon Limited Logo

Related Topics:

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8499 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...